Spirent Ab3-3050 W/ (2)pcg300bf And (2)icg3001bf Inquire For Single Modules

US $12,000.00

  • Watsonville, California, United States
  • Jan 29th
Up for sale is a Spirent Abacus 5000 IP telephone test system with the following: Model: AB3-3050 One SC3 chassis system controller 2 x PSU-3001 Power supplies. Spirent’s Abacus 5000 is aimed at VoIP product manufacturers and measuring product quality and standard adherence for these products. The Abacus is flexible enough to handle certain enterprise-level VoIP network management tasks, but that requires extra engineering time and effort. It’s best suited for its intended task  Key Benefits Comprehensive device testing for effects on voice quality (MOS, PSQM, PSQM+, PESQ, PESQ (MOS-LQO), J-MOS, R-Factor (P.834), E-Model R-Factor (G.107)) Highest scalability of voice-centric infrastructure testing Tests the impact of data and video on voice in a Triple Play network Simultaneously supports IP telephony and PSTN testing Can be used to test the interoperability of disparate devices and switching schemes including analog, TDM, and VoIP traffic Up for sale is a Spirent Abacus 5000 ICG3 ICG-3001BF subsystem with the following:SIP Call Generation 2 Port Support Spirent Abacus 5000 ICG3 subsystem simulates VoIP calling functionality. Up to 13 ICG3 subsystems per chassis One port  with dual media Gigabit Ethernet and 10/100/1000Base-T Ethernet VoIP call generation for SIP, H.323, MGCP, H.248/Megaco, NCS, SIP-T, SIGTRAN (M3UA) and T.38 Functional and performance testing for SIP, H.323, MGCP H.248/Megaco, NCS Advanced Trunking signaling testing with SIP-T (SIP for Telephones) , SIGTRAN (M3UA)and IPv6 All in one Media Gateway Emulation MGCP 1.0 H.248.1/Megaco versions 1 & 2 H.323-65K registrations per port TransportProtocols: RTP/UDP/TCP/RTCP SIP supportfor IPv6/Unicast addressing VLAN tagging according to the IEEE Standard 802.1Q Encoding and Decoding Speech:G.711 (?-law or A-law), G.723.1, G.726, G.729A/B Mobile NB encoding and decoding: GSM-AMR and EVRC VAD - Voice Activity Detection as a CODEC parameter T.38 Fax over IP Built-in protocol decoding and display Configurable Protocol Development Configurable SIP Call Flow and Message Generation Perform voice quality measurements on each call using PSQM, PSQM+ or PESQ PSQM, PSQM+ to MOS conversion PESQ-LQ calculations from PESQ measurements R-factor and J-MOS calculations from PESQ measurements Send and receive tones, speech, and video Detect and forward DTMF tones Flexible call sequences Generate or terminate up to 1024 media calls (RTP & Signaling) with path confirmation Generate or terminate up 4096 channels of Signaling without voice per subsystem Generate call setups to Media Gateway Controllers, Gateways, or Softswitches at 395 calls per or Softswitches at 395 calls per SIP IPv4, Signaling only, single IP address) Generate thousands of endpoint registrations at user selected rates The Abacus 5000 PCG3 subsystem provides PCM circuits that can emulate a telephone exchange (central office) or a terminal. The PCG3  subsystem provides TDM call generation and switching functionality to test PCM T1/E1 circuits with 24 or 30 channels per circuit. Each channel can be configured as an originating (calling party) or terminating (called party) channel.Supports SS7 specifications from ANSI, ETSI/ITU-T, China and Japan, CAS, MF R1/R1.5/R2, ISDN PRI, GR- China and Japan, CAS, MF R1/R1.5/R2, ISDN PRI, GR-303 and V5.1/V5.2, SLC-96/TR08 (Mode 1) 4, 14 or 28 full-duplex T1 with 24 channels per circuit at the T1 rate (1.544 Mbps) 4, 14 or 21 full-duplex E1 with 30 channels per circuit at the E1 rate (2.048 Mbps) 96, 336 or 672 channels (T1), or 120, 420 or 630 channels (E1) Call generation and switching Built-in protocol analyzers Custom protocols Sends and receives tones, PRBS, speech Perform voice quality measurements on each call using PSQM, PSQM+, and up to 112 channels (4-circuits) or 392 (14-circuits or 28-circuits) channels when using PESQ PSQM, PSQM+ to MOS conversion PESQ-LQ, R-factor, J-MOS calculations from PESQ measurements Performs fax measurements on 96 channels (4-circuits) and 336 channels (14-circuits or 28-circuits) Programmable call progress tones Detects and forwards DTMF, MF R1/R1.5/R2 pulse dialing Flexible call sequences Generates up to 607,975 (E1 PRI-ISDN) calls per hour per subsystem Switches up to 412,146 (T1 PRI-ISDN) calls per hour per subsystem Program test duration to be random or fixed from 1 second to indefinite Verifies speech path is established and retained for duration of call Results are automatically and continuously gathered and presented in tables and graphs SS7 event analyzer T.30 fax up to 14.4 kbps Up to V.90 server data modem (14 channels max for 4-circuits and 56 channels max for 14-circuits and 28/21-circuits) Echo measurements QSIG basic call support on ISDN PRI BRI over V5 SS7 COT CCR 16 groups of SS7, PRI, GR-303, or V5 trunks per subsystem Clear channel Voice quality measurements and fax within one script 2048 logical channels with GR-303 concentration  TCAP/INAP ITU-T SS7 CIC phone book NOTE:  No software of any kind (external or internal) is provided with the Hardware. Please contact Spirent to obtain software license rights and maintenance support. 
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes some scratches

Directions

Similar products from Network Analyzers & Network Troubleshooting Scanners

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies