Square Inline Fans with Multi-Directional Discharge (COOK), US $3,520.00 – Picture 0

Square Inline Fans with Multi-Directional Discharge (COOK), US $3,520.00 – Picture 1

Square Inline Fans with Multi-Directional Discharge (COOK), US $3,520.00 – Picture 2

Square Inline Fans with Multi-Directional Discharge (COOK), US $3,520.00 – Picture 3

Square Inline Fans With Multi-directional Discharge (cook)

US $3,520.00

Lawndale, California, United States
Feb 15th

Open on mobile:
QR code

Description - Fan shall be duct mounted, belt driven centrifugal square inline. Certifications - Fan shall be listed by Underwriters Laboratories (UL 705) and UL listed for Canada (CSA Standard 113 - M1984). Fan shall bear the AMCA Certified Ratings Seal for Sound and Air Performance. Construction - The fan shall be of bolted construction utilizing corrosion resistant fasteners. Housing shall be minimum 18 gauge galvanized steel with integral duct collars. Bolted access doors shall be provided on three sides, sealed with closed cell neoprene gasketing. Pivoting motor plate shall utilize threaded L-bolt design for positive belt tensioning. Housing shall be pre-drilled to accommodate universal mounting feet for vertical or horizontal installation. Unit shall bear an engraved aluminum nameplate. Nameplate shall indicate design CFM, static pressure and maximum fan RPM. Unit shall be shipped in ISTA Certified Transit Tested Packaging. Wheel - Wheel shall be centrifugal backward inclined, constructed of 100% aluminum, including a precision machined cast aluminum hub. Wheel inlet shall overlap an aerodynamic aluminum inlet cone to provide maximum performance and efficiency. Wheel shall be balanced in accordance with AMCA Standard 204-05, Balance Quality and Vibration Levels for Fans. Motor - Motor shall be NEMA design B with class B insulation rated for continuous duty and furnished at the specified voltage, phase and enclosure. Bearings - Bearings shall be designed and individually tested specifically for use in air handling applications. Construction shall be heavy duty regreasable ball type in a pillowblock cast iron housing selected for a minimum L50 life in excess of 200,000 hours at maximum cataloged operating speed. Belts and Drives - Belts shall be oil and heat resistant, static conducting. Drives shall be precision machined cast iron type, keyed and securely attached to the wheel and motor shafts. Drives shall be sized for 150% of the installed motor horsepower. The variable pitch motor drive must be factory set to the specified fan RPM. Product - Fan shall be model SQN-B as manufactured by Loren Cook Company of

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Manufacturer	LOREN COOK COMPANY
Type	Exhaust Fan
Model	245 SQN-B
Country/Region of Manufacture	United States