stainless steel shaft for sale, brand-new and used.

55 each RULAND MDCD19-6-6-SS SPECIAL 6mm STAINLESS DOUBLE SHAFT COUPLING NEW! Description Condition: New: without packaging Stamping or markings: RULAND (on each side of the coupling) MDCD19-6-6-SS, SPECIAL M3 THREAD AND EXTRA SPRING 303 STAINLESS STEEL STOCK NO. DD-8822-SS BORE 6MM X 6MM RULAND MANUFACTURING CO., INC (plus other information on the outside plastic sleeve) Weight; about; 7 pounds 1 ounce

BRAND NEW RSV3G30D-F25EZ PRESSURE WASHER PUMP PURCHASED DIRECT FROM ANNOVI REVERBERI / AR NORTH AMERICA The AR North America RSV3G30D-F25EZ features a 3/4" hollow shaft with a gas engine flange, operates at 3400 RPM, and has a max PSI of 3000. This pump comes equiped with an Easy Start Valve that eases internal pump pressures that can make cold starts with gasoline engines difficult. AR (ANNOVI REVERBERI) TRIPLEX PRESSURE WASHER PUMP 3.0 GPM 3000 PSI INLET 3/8

BRAND NEW RMV2.5G30D PRESSURE WASHER PUMP PURCHASED DIRECT FROM ANNOVI REVERBERI / AR NORTH AMERICA THERMAL RELIEF VALVE IS INCLUDED SKU: RMV2.5G30D

USED LUTZ NIRO STAINLESS STEEL DRUM PUMP Shaft FOR FLAMMABLE LIQUIDS. 40" LONG SHAFT BY 1-1/2" DIAMETER. IN GOOD CONDITION 01/PTBNr.111B/S 1797 This is for the tube/shaft only.

Submersible Pump Motor, 1 Ph, 1 HP, 230V, 4 Inch, 3 Wire Brand new motor never used. Original packaging included.

Pacer Water Pump — 160 GPM, 5.5 HP, 2in., Model# SEB2PL E5.5 160 max. GPM, 52 PSI max. and 120ft.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Six 6mm grade 12.9 Plungers: A special thick solid ceramic for long life, strong durability and more resilience Crankcase: Precisions die cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and drain plugs. Bearings: Oversized for maximum life and load disbursement, two ball bearings.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Six 6mm grade 12.9 Plungers: A special thick solid ceramic for long life, strong durability and more resilience Crankcase: Precisions die cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and drain plugs. Bearings: Oversized for maximum life and load disbursement, two ball bearings.

Sale is for One USED DAYTON MIXER WITH STAINLESS SHAFT AND PROP This has light scratches from normal use This has been tested and runs well Comes as shown with the shaft,mixing blade and mount all ready to go! The mixer shown is the one you will receive Spec's are Mfg- Dayton Model-

As pictured New but no original box or shaft...prop, air filter ,instructions come with mixer. NOTE: NO SHAFT you need to purchase the shaft 5/8 " x 32". Purchased at Acklands sale.Shop around,compare,and study pictures before bidding.Shafts are readily available at any scrap steel yard.SAVE BIG TIME.Shipping $29.00 North America.Technical Specs

Description for Wilo 4090765 Overview: Wet rotor circulation pump, with flanged connection. (Flange parallel to shaft). Pre-selectable speeds to adjust the capacity on "S" versions.

Search Shop:

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 8mm grade 8.8 Plungers: A special thick ceramic for long life, strong durability, and more resilience Crankcase: Precision die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized tapered roller bearing for maximum life and load disbursement Bearing Support: Precision die cast and machined to assure c

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 8mm grade 8.8 Plungers: A special thick ceramic for long life, strong durability, and more resilience Crankcase: Precision die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized tapered roller bearing for maximum life and load disbursement Bearing Support:

This auction is for one (1) Valu-Guide 2 piece clamping shaft collar. VG-SC-150 Locking Shaft Collar for a 1.50" diameter shaft. Hard plastic material with stainless steel screws.

Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.

SERFILCO G62092 SCRUBBER PUMP NIB NEW SEVERE CHEMICAL DUTY 7.5HP Description: SEVERE CHEMICAL DUTY; HP: 7.50; HZ: 60; FRAME: 184TCYZ; TYPE: UT; ENCL: TE; NEMA DESIGN: B; RPM: 3490; SF: 1.25; PH: 3; CODE: J; AMB: 40 C; VOLTS: 208-230/460; INSULATION CLASS: F; DUTY: CONT; AMPS: 20.7-18.9/9.4; SHAFT END BRG: 6307-2RSJC3; OPP END BRG: 6205-2RSJC3; SF AMPS: 21.7/10.9; ID# P 08 186953 0001 M 0018; NEMA EFF: 86.5 ORDER# 450156B10; BOOK INCLUDED