+ Post new Ad
Stanley Grinder with pedestal wheel guards with Lights., US $2400 – Picture 0
Stanley Grinder with pedestal wheel guards with Lights., US $2400 – Picture 0

Stanley Grinder With Pedestal Wheel Guards With Lights.

US $2400

  • Zanesville, Ohio, United States
  • Jun 9th
Open on mobile:
QR code
Stanley Grinder tag reads Model 677, frame 116, 5.0 amp 1/3 H.P. Single phase 115 volt Cycle 50/60. T. Rise 55 degrees CINT  Rpm 1725/1425 Serial #5456SG00041. Grinder is 21" wide, and 50" tall to the top of the iron wheel guards. Wheel spindles (5/8") are in very good condition, all washers and spacers, nuts appear to be complete and factory, they move freely are not loose and are nice condition. Takes 6" wheels.  Some screws are missing from the iron guards, and the lands and brackets are gone. What you see is what you get!  Has Stanley factory window guards, with built in lights tag reads,   Type 600-A 115 volts 50 watts (see Photo)  Also has a  factory Stanley pedestal Model #560 34" tall to the bottom of the grinder with built in water well. the original cup is missing, a butter cup fits in it perfect.  Ships in two boxes 70 pounds each, one will contain the grinder the other the pedestal. Can be picked up, no reserve auction.

Directions

Similar products from Toold for Grinding Machines

TWO STARRETT 271 BLOCKS

TWO STARRETT 271 BLOCKS

  • Baldwinville, Massachusetts, United States
  • Jun 10th
INTRODUCTION TO ABRASIVES & GRINDING WHEELS BOOK #3 ROUGH & PRECISION GRIND RB45

INTRODUCTION TO ABRASIVES & GRINDING WHEELS BOOK #3 ROUGH & PRECISION GRIND RB45

  • Perth, Ontario, Canada
  • Jun 10th
Norton INTRODUCTION TO ABRASIVES & GRINDING BOOK 2 UNDERSTANDING the Wheel RB44

Norton INTRODUCTION TO ABRASIVES & GRINDING BOOK 2 UNDERSTANDING the Wheel RB44

  • Perth, Ontario, Canada
  • Jun 10th
Norton INTRODUCTION TO ABRASIVES & GRINDING WHEELS BOOK 1 ORIENTATION RB43 1971

Norton INTRODUCTION TO ABRASIVES & GRINDING WHEELS BOOK 1 ORIENTATION RB43 1971

  • Perth, Ontario, Canada
  • Jun 10th
Precise jig grinder

Precise jig grinder

  • Blountsville, Alabama, United States
  • Jun 10th
REAL CLEAN K O LEE GRINDING MANDREL 11/4" X 11/2" MODEL B-653 1 1/2" FREE SHIP

REAL CLEAN K O LEE GRINDING MANDREL 11/4" X 11/2" MODEL B-653 1 1/2" FREE SHIP

  • Seekonk, Massachusetts, United States
  • Jun 10th
LOT of 22 NEW GRINDING WHEELS for ID OD GRINDER tool cutter 2" DIAMETER

LOT of 22 NEW GRINDING WHEELS for ID OD GRINDER tool cutter 2" DIAMETER

  • Milroy, Indiana, United States
  • Jun 10th
No. 426763 Diamond tip Dressing Nip

No. 426763 Diamond tip Dressing Nip

  • Southbridge, Massachusetts, United States
  • Jun 10th
GALMEYER #20 6" X 18" SURFACE GRINDER

GALMEYER #20 6" X 18" SURFACE GRINDER

  • Brook Park, Ohio, United States
  • Jun 10th
(2) Misc. Grinding Wheel

(2) Misc. Grinding Wheel

  • Yorba Linda, California, United States
  • Jun 9th
Scotchman Ironworker 314 punch shear angle, 3hp, used, needs work

Scotchman Ironworker 314 punch shear angle, 3hp, used, needs work

  • DeKalb, Illinois, United States
  • Jun 9th
Medina Model B End Grinder

Medina Model B End Grinder

  • Glasgow, Kentucky, United States
  • Jun 9th
Pair Of Magnetic Pinned Transfer Blocks Machinist Tool Die Cutter Grinder Chuck

Pair Of Magnetic Pinned Transfer Blocks Machinist Tool Die Cutter Grinder Chuck

  • Flint, Michigan, United States
  • Jun 9th
MOORE Jig Grinder Spindle Grinder Head

MOORE Jig Grinder Spindle Grinder Head

  • Oregon, Ohio, United States
  • Jun 9th
POWERTEC 71003 Diamond Grinding Wheel Dresser New

POWERTEC 71003 Diamond Grinding Wheel Dresser New

  • San Bernardino, California, United States
  • Jun 9th
Struers Abramatic Polisher/Grinder mod #376 version 2

Struers Abramatic Polisher/Grinder mod #376 version 2

  • Puyallup, Washington, United States
  • Jun 9th
DUMORE TOOL POST GRINDER Model No. 14 / Tom Thumb NEW BELT RUNS STRONG

DUMORE TOOL POST GRINDER Model No. 14 / Tom Thumb NEW BELT RUNS STRONG

  • Toms River, New Jersey, United States
  • Jun 9th
~Vintage~Wooden~BOX~Sine Dresser~Z x S~4 1/2" x 3"~Nice~

~Vintage~Wooden~BOX~Sine Dresser~Z x S~4 1/2" x 3"~Nice~

  • Logansport, Indiana, United States
  • Jun 9th
Heald No.72-A inside & outside diameter grinder ID/OD 220/240V 3PH motors

Heald No.72-A inside & outside diameter grinder ID/OD 220/240V 3PH motors

  • Connersville, Indiana, United States
  • Jun 9th
3M Die Grinder 20237, 1 hp 1/4 in Collet 20,000 RPM

3M Die Grinder 20237, 1 hp 1/4 in Collet 20,000 RPM

  • Sparta, Wisconsin, United States
  • Jun 9th

People who viewed this item also vieved

Drill press column clamps

Drill press column clamps

  • Arlington, Texas, United States
  • Jan 30th
Geometric 11/4"D Threading Head 1 1/2" shank W/17 sets chasers W/Rough & Finish

Geometric 11/4"D Threading Head 1 1/2" shank W/17 sets chasers W/Rough & Finish

  • Milwaukee, Wisconsin, United States
  • Jan 30th
Hardinge 20 DS Emergency Step Collets Lot of 3 pcs

Hardinge 20 DS Emergency Step Collets Lot of 3 pcs

  • Johnson City, New York, United States
  • Jan 30th
Vintage Moore Precision Tool cabinet/Work Bench Drill/Tap/Boring Wooden

Vintage Moore Precision Tool cabinet/Work Bench Drill/Tap/Boring Wooden

  • McHenry, Illinois, United States
  • Jan 30th
METEOR PRECSION SWISS DRILL BIT SHARPENER GRINDER, WATCHMAKER JEWELER $.99 NR

METEOR PRECSION SWISS DRILL BIT SHARPENER GRINDER, WATCHMAKER JEWELER $.99 NR

  • Lorton, Virginia, United States
  • Jan 30th
29Pcs 135° Split Point M35 (HSS+5% Cobalt) ANSI Jobbers Length Drill, #0029-0200

29Pcs 135° Split Point M35 (HSS+5% Cobalt) ANSI Jobbers Length Drill, #0029-0200

  • TORONTO, ONTARIO, Canada
  • Jan 30th
BT35 toolholders with 120mm x 42mm check rule lot of two with 30 day guarantee

BT35 toolholders with 120mm x 42mm check rule lot of two with 30 day guarantee

  • Rockford, Illinois, United States
  • Jan 30th
GRAPHITE POCO EDM-2 RODS 1/4" X 12" LONG

GRAPHITE POCO EDM-2 RODS 1/4" X 12" LONG

  • Hudson, New York, United States
  • Jan 30th
Mitsubishi VX-10 Sinker EDM - 1996 - 3R Tooling

Mitsubishi VX-10 Sinker EDM - 1996 - 3R Tooling

  • Watertown, Connecticut, United States
  • Jan 30th
Kennametal Kendex TNG 222 K21 indexable inserts

Kennametal Kendex TNG 222 K21 indexable inserts

  • Amherst, Massachusetts, United States
  • Jan 30th
0.125" Cap. 8.625" Leg Amada CSW-220 NOTCHER, Coper & Notcher

0.125" Cap. 8.625" Leg Amada CSW-220 NOTCHER, Coper & Notcher

  • Harrison, New Jersey, United States
  • Jan 30th
12Ga Thickness 48" W Baileigh BB-4812 FINGER BRAKE, 11-finger assortment

12Ga Thickness 48" W Baileigh BB-4812 FINGER BRAKE, 11-finger assortment

  • Harrison, New Jersey, United States
  • Jan 30th
Lapping Plate assortment

Lapping Plate assortment

  • Sicklerville, New Jersey, United States
  • Jan 30th
Shaviv Mango II Set M "The 2 in 1" Holds both E & B Blades Included #90094

Shaviv Mango II Set M "The 2 in 1" Holds both E & B Blades Included #90094

  • Seminole, Florida, United States
  • Jan 30th
The Heavy Scaper Shaviv Set C with Classic Red Handle Ext Holder C Part #29067

The Heavy Scaper Shaviv Set C with Classic Red Handle Ext Holder C Part #29067

  • Seminole, Florida, United States
  • Jan 30th
SET OF 10 VINTAGE LATHE CHANGING GEARS Le BLOND, ATLAS, LOGAN, SOUTH BEND

SET OF 10 VINTAGE LATHE CHANGING GEARS Le BLOND, ATLAS, LOGAN, SOUTH BEND

  • Elgin, Illinois, United States
  • Jan 30th
VINTAGE LE BLOND, ATLAS, LOGAN,SOUTH BEND LATHE STEADY REST & FOLLOWER REST

VINTAGE LE BLOND, ATLAS, LOGAN,SOUTH BEND LATHE STEADY REST & FOLLOWER REST

  • Elgin, Illinois, United States
  • Jan 30th
Blacks Smith Anvil From Iconic Winchester Arms Co

Blacks Smith Anvil From Iconic Winchester Arms Co

  • Stratford, Connecticut, United States
  • Jan 30th
NIAGARA - MILL CUTTER - 4 X 1 X 1 1/4, NOS USA 24 TEETH

NIAGARA - MILL CUTTER - 4 X 1 X 1 1/4, NOS USA 24 TEETH

  • McKee, Kentucky, United States
  • Jan 30th
NIAGARA - STRAIGHT MILLING CUTTER - 4 X 9/16 X 1, HSS USA NOS 24 TETH

NIAGARA - STRAIGHT MILLING CUTTER - 4 X 9/16 X 1, HSS USA NOS 24 TETH

  • McKee, Kentucky, United States
  • Jan 30th
NIAGARA - STRAIGHT SIDE MILL CUTTER - 3 x .362 x 1 ,20 TEETH USA

NIAGARA - STRAIGHT SIDE MILL CUTTER - 3 x .362 x 1 ,20 TEETH USA

  • McKee, Kentucky, United States
  • Jan 30th
Raytech Gem Lab Diamond Abrasive Polisher Model GL1, 1/3 HP, Nice Condition!

Raytech Gem Lab Diamond Abrasive Polisher Model GL1, 1/3 HP, Nice Condition!

  • Pawtucket, Rhode Island, United States
  • Jan 30th
Vigor Stainless Steel Dewaxer Machine, Nice Condition, Stainless Steel!

Vigor Stainless Steel Dewaxer Machine, Nice Condition, Stainless Steel!

  • Pawtucket, Rhode Island, United States
  • Jan 30th
JELRUS WAX INJECTORS AIR PRESSURE TYPE JEWELRY MACHINE, Nice Condition!

JELRUS WAX INJECTORS AIR PRESSURE TYPE JEWELRY MACHINE, Nice Condition!

  • Pawtucket, Rhode Island, United States
  • Jan 30th
DOALL VERTICAL VARIABLE SPEED BAND SAW

DOALL VERTICAL VARIABLE SPEED BAND SAW

  • Watertown, Connecticut, United States
  • Jan 30th
10" x 13" HEM 750A HORIZONTAL BANDSAW

10" x 13" HEM 750A HORIZONTAL BANDSAW

  • Santa Paula, California, United States
  • Jan 30th
36" inch x 2 1/8" wide x 3/16" Bandsaw tire

36" inch x 2 1/8" wide x 3/16" Bandsaw tire

  • Francis Creek, Wisconsin, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies