+ Post new Ad
Starrett 568A V-Block and Clamp For Round Or Square Work 2" Diameter Round, US $125.00 – Picture 0
Starrett 568A V-Block and Clamp For Round Or Square Work 2" Diameter Round, US $125.00 – Picture 1
Starrett 568A V-Block and Clamp For Round Or Square Work 2" Diameter Round, US $125.00 – Picture 2
Starrett 568A V-Block and Clamp For Round Or Square Work 2" Diameter Round, US $125.00 – Picture 3
Starrett 568A V-Block and Clamp For Round Or Square Work 2" Diameter Round, US $125.00 – Picture 0
Starrett 568A V-Block and Clamp For Round Or Square Work 2" Diameter Round, US $125.00 – Picture 1
Starrett 568A V-Block and Clamp For Round Or Square Work 2" Diameter Round, US $125.00 – Picture 2
Starrett 568A V-Block and Clamp For Round Or Square Work 2" Diameter Round, US $125.00 – Picture 3

Starrett 568a V-block And Clamp For Round Or Square Work 2" Diameter Round

US $125.00

  • Feasterville-Trevose, Pennsylvania, United States
  • Jan 30th
Open on mobile:
QR code
Starrett 568A V-Block and Clamp For Round Or Square Work, 2" Diameter Round Capacity, 1-7/16" Square Capacity (1-9/16" With Screw At Top) VERY GOOD WORKING CONDITION (SOME MINOR STORAGE RUST - SEE PICTURES); NO PERSONAL MARKINGS STOCK#: 568A Hardened steel, precision ground parallel and square V-grooves are ground central and parallel to the sides and base - perfect alignment in matched pairs Clamps have screw holes at 45? and 90? to hold either square or round work Stepped groove construction permits high or low clamp mounting or small or large work Clamps do not project over the width of the block, permitting it to be used on the base, ends or sides 3/8-16 tapped holes permit mounting blocks on faceplates or angle irons Each block is 2-1/2" long x 3" wide x 2" high (63 x 75 x 50mm) _______________________________________ BOX_BEHIND_BLK-MAC-KART_TOPSHELF_6
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Starrett
Brand Starrett
Country/Region of Manufacture United States
Model 568A

Directions

Similar products from Supporting Blocks & Sets

Lufkin Pair V Blocks No. 905 with Clamps Vintage in Original Box

Lufkin Pair V Blocks No. 905 with Clamps Vintage in Original Box

  • Saint Petersburg, Florida, United States
  • Jan 30th
GREAT! PRECISION V-BLOCK / FIXTURE #243-201

GREAT! PRECISION V-BLOCK / FIXTURE #243-201

  • Chino, California, United States
  • Jan 30th
Fowler 52-437-250 Parallel Set, 9 Pair, 6" L x 1/4", 3/4" to 1-3/4" (50B)

Fowler 52-437-250 Parallel Set, 9 Pair, 6" L x 1/4", 3/4" to 1-3/4" (50B)

  • Saint Louis, Missouri, United States
  • Jan 30th
“V” Block Multi “v’s” Hardened & Ground Steel Block V.G.C.+

“V” Block Multi “v’s” Hardened & Ground Steel Block V.G.C.+

  • Rome, New York, United States
  • Jan 30th
Machinist Parallel Set Up Blocks Matched Pair

Machinist Parallel Set Up Blocks Matched Pair

  • Rome, New York, United States
  • Jan 30th
Parallel Clamps 3” Deep Throat x 5” Height, Hardened & Ground G.C.+

Parallel Clamps 3” Deep Throat x 5” Height, Hardened & Ground G.C.+

  • Rome, New York, United States
  • Jan 30th
STARRETT HOLD DOWNS NO. 54

STARRETT HOLD DOWNS NO. 54

  • Mansfield, Ohio, United States
  • Jan 30th
Machinist tool attachment

Machinist tool attachment

  • Canton, Connecticut, United States
  • Jan 30th
Machinist Set Up Step Blocks Nine Sets 3 Different Sizes Hard Plastics

Machinist Set Up Step Blocks Nine Sets 3 Different Sizes Hard Plastics

  • Yorktown, Indiana, United States
  • Jan 30th
V Block with clamp off-set

V Block with clamp off-set

  • Hatboro, Pennsylvania, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist Clamp Live Center, Parts Etc Pot Luck

MACHINIST LATHE MILL Lot of Machinist Clamp Live Center, Parts Etc Pot Luck

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST LATHE MILL Unusual Brown & Sharpe V Block and Clamp

MACHINIST LATHE MILL Unusual Brown & Sharpe V Block and Clamp

  • Morris Plains, New Jersey, United States
  • Jan 30th
ANGLE BLOCK SET IN WOOD BOX

ANGLE BLOCK SET IN WOOD BOX

  • Arlington, Texas, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist Tap Wrenches Blocks Hammers Parts Etc

MACHINIST LATHE MILL Lot of Machinist Tap Wrenches Blocks Hammers Parts Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST LATHE MILL Clean Unused Bench Block for Set Up Hold Down

MACHINIST LATHE MILL Clean Unused Bench Block for Set Up Hold Down

  • Morris Plains, New Jersey, United States
  • Jan 30th
2" ROUND V-BLOCK AND CLAMPS STARRETT #568A, EDP# 52590

2" ROUND V-BLOCK AND CLAMPS STARRETT #568A, EDP# 52590

  • Philadelphia, Pennsylvania, United States
  • Jan 30th
Parallels, (8) Brown & Sharpe No. 673 Adjustable Machinist Parallels, USA

Parallels, (8) Brown & Sharpe No. 673 Adjustable Machinist Parallels, USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th
Machinists 11/26BB BUY NOWMatched Brass Magnetic Transfer Pads for Grinder

Machinists 11/26BB BUY NOWMatched Brass Magnetic Transfer Pads for Grinder

  • Lutz, Florida, United States
  • Jan 30th
Machinists 11/26BB BUY NOWFACTORY READ SOUTH BEND tool hanger for 5_C

Machinists 11/26BB BUY NOWFACTORY READ SOUTH BEND tool hanger for 5_C

  • Lutz, Florida, United States
  • Jan 30th
PAIR OF SOLID BRASS MACHINISTS V-BLOCKS

PAIR OF SOLID BRASS MACHINISTS V-BLOCKS

  • Newport, Maine, United States
  • Jan 30th

People who viewed this item also vieved

. vintage carbide tip live center lathe tool signed H. SHERMAN

. vintage carbide tip live center lathe tool signed H. SHERMAN

  • Torrington, Connecticut, United States
  • Jun 9th
Morse Taper Lathe Dead Center

Morse Taper Lathe Dead Center

  • Prescott, Arizona, United States
  • Jun 9th
Riten #56633 3MT Roughing Live Center 6.5" x 3" Bull Nose Point

Riten #56633 3MT Roughing Live Center 6.5" x 3" Bull Nose Point

  • Venice, Florida, United States
  • Jun 9th
PRATT & WHITNEY 12" T SLOT ROTARY TABLE

PRATT & WHITNEY 12" T SLOT ROTARY TABLE

  • Ellington, New York, United States
  • Jun 9th
Precision Milling Attachment with 2" Quick Release Vise for 6" to 12" Lathes New

Precision Milling Attachment with 2" Quick Release Vise for 6" to 12" Lathes New

  • Jacksonville, Florida, United States
  • Jun 9th
Suburban Tool, INC. URA-040508 8" X 4" X 5" - Machined Right Angle Tool

Suburban Tool, INC. URA-040508 8" X 4" X 5" - Machined Right Angle Tool

  • Fremont, California, United States
  • Jun 9th
NEW TECHNIKS-SYIC STRAIGHT SEALED COOLANT COLLET 1-1/4" OD 3/4" ID D14164

NEW TECHNIKS-SYIC STRAIGHT SEALED COOLANT COLLET 1-1/4" OD 3/4" ID D14164

  • Dayton, Ohio, United States
  • Jun 9th
MONARCH 19/32" DIAMETER 2J COLLET MORE COLLETS & TOOLING LISTED LOT C11944

MONARCH 19/32" DIAMETER 2J COLLET MORE COLLETS & TOOLING LISTED LOT C11944

  • Dayton, Ohio, United States
  • Jun 9th
HARDINGE 2J LATHE COLLET 31/64"

HARDINGE 2J LATHE COLLET 31/64"

  • Fullerton, California, United States
  • Jun 9th
HEINRICH GRIPMASTER 4SV DRILL PRESS VISE PROJECT

HEINRICH GRIPMASTER 4SV DRILL PRESS VISE PROJECT

  • Erie, Pennsylvania, United States
  • Jun 9th
Grinder Hand Machinist Toolmaker PRECISION VICE Grinders Vice in Wood Box SUPER

Grinder Hand Machinist Toolmaker PRECISION VICE Grinders Vice in Wood Box SUPER

  • East Lansing, Michigan, United States
  • Jun 9th
CLEAN!! HEAVY DUTY 6" MILLING VISE

CLEAN!! HEAVY DUTY 6" MILLING VISE

  • La Puente, California, United States
  • Jun 9th
Mitee-Bite Pitbull Clamp 26070

Mitee-Bite Pitbull Clamp 26070

  • Maple Ridge, British Columbia, Canada
  • Jun 9th
AMERICAN MADE WILLIAMS 10" C WELDING CLAMP No. 10 W/ 4" THROAT

AMERICAN MADE WILLIAMS 10" C WELDING CLAMP No. 10 W/ 4" THROAT

  • Chino, California, United States
  • Jun 9th
Armstrong 79-469 "U"Clamp Hold Down Machining Fixture Strap ((#D344))

Armstrong 79-469 "U"Clamp Hold Down Machining Fixture Strap ((#D344))

  • Green Bay, Wisconsin, United States
  • Jun 9th
Emco 6" Independent 4-jaw chuck

Emco 6" Independent 4-jaw chuck

  • Bellevue, Washington, United States
  • Jun 9th
Abbott 1.5mm x 60? Serrated Chuck Jaw 5 .5" L 2" W 3" H 45/64" Slot Qty 3

Abbott 1.5mm x 60? Serrated Chuck Jaw 5 .5" L 2" W 3" H 45/64" Slot Qty 3

  • Venice, Florida, United States
  • Jun 9th
28" 4-Jaw Chuck/ Faceplate D1-8 Back

28" 4-Jaw Chuck/ Faceplate D1-8 Back

  • San Diego, California, United States
  • Jun 9th
1.5" SHANK ACURA TAP Collet Chuck Tapping Milling Machine Turret Metal Lathe Mac

1.5" SHANK ACURA TAP Collet Chuck Tapping Milling Machine Turret Metal Lathe Mac

  • Yorktown, Virginia, United States
  • Nov 15th
Valenite TG100 Collet Set Chuck Milling Machine Tool 1.5" SS Turret Metal Lathe

Valenite TG100 Collet Set Chuck Milling Machine Tool 1.5" SS Turret Metal Lathe

  • Yorktown, Virginia, United States
  • Nov 15th
"CelluClay Instant Paper-Mache 1lb-Bright White, Set Of 2"

"CelluClay Instant Paper-Mache 1lb-Bright White, Set Of 2"

  • Hickory Hills, Illinois, United States
  • Nov 15th
HEAVY DUTY CENTER FINDER SQUARE 1-1/2" 38mm WITH ROUND BAR FINDER HEAD DIA 3/8"

HEAVY DUTY CENTER FINDER SQUARE 1-1/2" 38mm WITH ROUND BAR FINDER HEAD DIA 3/8"

  • Delhi, DELHI, India
  • Jun 6th
ROTARY TABLE 3" TILTING WITH 70 MM INDEPENDENT CHUCK & BACKPLATE.

ROTARY TABLE 3" TILTING WITH 70 MM INDEPENDENT CHUCK & BACKPLATE.

  • Delhi, DELHI, India
  • Jun 6th
EXPERT rotary table EGD125/0006/04-300

EXPERT rotary table EGD125/0006/04-300

  • Athens, Pireus, Greece
  • Jun 7th
Kitagawa 3-Jaw Hydraulic 6"Chuck B206, A2-5 Spindle Nose,B-206,Great Condition!

Kitagawa 3-Jaw Hydraulic 6"Chuck B206, A2-5 Spindle Nose,B-206,Great Condition!

  • Minneapolis, Minnesota, United States
  • Jul 5th
Mixed lot Machinist Tools, Files, Countersink, Hold Down Clamp & Screw Lot

Mixed lot Machinist Tools, Files, Countersink, Hold Down Clamp & Screw Lot

  • Middlesex, New Jersey, United States
  • Jul 6th
Mixed lot Machinist Tools, Files, Tool bit, Hold Down Clamp & Screw Lot

Mixed lot Machinist Tools, Files, Tool bit, Hold Down Clamp & Screw Lot

  • Middlesex, New Jersey, United States
  • Jul 6th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies