+ Post new Ad
starrett and brown /sharp parallell clamps, US $142 – Picture 0
starrett and brown /sharp parallell clamps, US $142 – Picture 0

Starrett And Brown /sharp Parallell Clamps

US $142

  • Fowler, Colorado, United States
  • Jan 30th
Open on mobile:
QR code
these are some various  parallell clamps. I DONT KNOW THE CORRECT WAY TO MEASURE THEM BUT----- the far left top and bottom clamps are starrett top 1 measures 4" over all length. bottom clamp measures 1 5/8 overall length. top right clamp is a brown&sharp  measures 2 3/4 overall length (HAS SLIGHT NICKS)  MIDDLE CLAMP 2 1/8 overall no name on it.  3/8 c clamp works good has a letter  g  on back.   bottom center clamp has surface rust But works fine measures  2 1/8 overall length.  Buyer pays 6.00 shipping!!!! 
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Starrett

Directions

Similar products from Clips & Jaws

NEW!!! STARRETT 161E PARALLEL CLAMP EDP 50598

NEW!!! STARRETT 161E PARALLEL CLAMP EDP 50598

  • Wilmington, North Carolina, United States
  • Jan 30th
LOT 2 NEW BARNES 13848 C-CLAMP W/ LOCKNUT 3/8IN BOLT SIZE PIPE SUPPORT D276959

LOT 2 NEW BARNES 13848 C-CLAMP W/ LOCKNUT 3/8IN BOLT SIZE PIPE SUPPORT D276959

  • Delta, Ohio, United States
  • Jan 30th
P-1800 Knu-Vise Locking Clamp, Hand Vise Clamp, C clamp, Locking Pliers

P-1800 Knu-Vise Locking Clamp, Hand Vise Clamp, C clamp, Locking Pliers

  • East Troy, Wisconsin, United States
  • Jan 30th
Starrett 4in "A" Clamps 164c

Starrett 4in "A" Clamps 164c

  • Wilmington, North Carolina, United States
  • Jan 30th
11 Aerospace Side Grip Clamps (9 Monogram 2 Unmarked) with Monolock Pliers

11 Aerospace Side Grip Clamps (9 Monogram 2 Unmarked) with Monolock Pliers

  • Blue Ridge Summit, Pennsylvania, United States
  • Jan 30th
2 industrial c clamps- seating clamps F&M clamp

2 industrial c clamps- seating clamps F&M clamp

  • Wellman, Iowa, United States
  • Jan 30th
Vintage Knu-Vise P-1000 Forged Steel Plier Clamp USA

Vintage Knu-Vise P-1000 Forged Steel Plier Clamp USA

  • Hollywood, Florida, United States
  • Jan 30th
CARR LANE 5E660 TOGGLE CLAMP

CARR LANE 5E660 TOGGLE CLAMP

  • El Paso, Texas, United States
  • Jan 30th
DE-STA-CO 331-SS Clamp, New In Bag

DE-STA-CO 331-SS Clamp, New In Bag

  • Wichita, Kansas, United States
  • Jan 30th
Set of 2 Destaco Steel Clamps 324

Set of 2 Destaco Steel Clamps 324

  • Wichita, Kansas, United States
  • Jan 30th
DE-STA-CO CLAMP C-STYLE PLIER SHAPE 500 LB LOAD CAPACITY #52940

DE-STA-CO CLAMP C-STYLE PLIER SHAPE 500 LB LOAD CAPACITY #52940

  • Resaca, Georgia, United States
  • Jan 30th
Five (5) Kant Twist Clamp 405 2" D MADE IN USA

Five (5) Kant Twist Clamp 405 2" D MADE IN USA

  • Algonac, Michigan, United States
  • Jan 30th
KNU-VISE locking clamps metal working tools machinists

KNU-VISE locking clamps metal working tools machinists

  • Gresham, Oregon, United States
  • Jan 30th
STAINLESS STEEL KANT-TWIST 4-1/2 Dss 515 Stainless Steel Lever Clamp Deep Throat

STAINLESS STEEL KANT-TWIST 4-1/2 Dss 515 Stainless Steel Lever Clamp Deep Throat

  • Algonac, Michigan, United States
  • Jan 30th
Williams Vulcan #58 Clamp

Williams Vulcan #58 Clamp

  • Blue Ridge, Texas, United States
  • Jan 30th
DE-STA-CO 608 Toggle Clamp, Straight Line

DE-STA-CO 608 Toggle Clamp, Straight Line

  • Buffalo, New York, United States
  • Jan 30th
10-NIB Oz Gedney CBC-1 Malleable Iron Zinc Plated Conduit C Clamp 1/2" - 1-1/4"

10-NIB Oz Gedney CBC-1 Malleable Iron Zinc Plated Conduit C Clamp 1/2" - 1-1/4"

  • Mays Landing, New Jersey, United States
  • Jan 30th
Brown & Sharpe Machinist Parallel Clamp & Machinist Parallel Clamp

Brown & Sharpe Machinist Parallel Clamp & Machinist Parallel Clamp

  • Valparaiso, Indiana, United States
  • Jan 30th
ACA031, De-Sta-Co, Clamp Arm, New Old Stock

ACA031, De-Sta-Co, Clamp Arm, New Old Stock

  • Warren, Michigan, United States
  • Jan 30th
Irwin 225134 Quick-Grip C-Clamp-3X4-1/2 DEEP C-CLAMP

Irwin 225134 Quick-Grip C-Clamp-3X4-1/2 DEEP C-CLAMP

  • Brooklyn, New York, United States
  • Jan 30th

People who viewed this item also vieved

ANGLE PLATE STEP MACHINIST TOOLMAKER HARDENED GRIND FIXTURE 3x4 1/8x3

ANGLE PLATE STEP MACHINIST TOOLMAKER HARDENED GRIND FIXTURE 3x4 1/8x3

  • Hadley, Pennsylvania, United States
  • May 28th
MAGNETIC TRANSFER V-BLOCK machinist tools alluminum and steel

MAGNETIC TRANSFER V-BLOCK machinist tools alluminum and steel

  • Hadley, Pennsylvania, United States
  • May 28th
MACHINIST TOOL LATHE MILL ToolMakers Ground Angle Plate Fixture 1.25x1.25x2.25

MACHINIST TOOL LATHE MILL ToolMakers Ground Angle Plate Fixture 1.25x1.25x2.25

  • Hadley, Pennsylvania, United States
  • May 28th
HARDINGE SET OF 5C COLLETS FRACTIONAL SIZES GOOD CONDITION

HARDINGE SET OF 5C COLLETS FRACTIONAL SIZES GOOD CONDITION

  • Saint-Laurent, Quebec, Canada
  • May 29th
MACHINIST TOOLS * R8 COLLETS * KENT * 1 LOT (5)

MACHINIST TOOLS * R8 COLLETS * KENT * 1 LOT (5)

  • Camarillo, California, United States
  • May 29th
MACHINIST TOOLS * R8 COLLETS * HARDINGE * 1 LOT (8)

MACHINIST TOOLS * R8 COLLETS * HARDINGE * 1 LOT (8)

  • Camarillo, California, United States
  • May 29th
USED BULLNOSE 5MT DEAD CENTER BULL NOSE 5 MT 5689-3342 POINT DIA. 4.021"

USED BULLNOSE 5MT DEAD CENTER BULL NOSE 5 MT 5689-3342 POINT DIA. 4.021"

  • Fairfield, Iowa, United States
  • May 31st
USED LATHE DEAD CENTER MT2 SHANK x 1.875" POINT DIAMETER

USED LATHE DEAD CENTER MT2 SHANK x 1.875" POINT DIAMETER

  • Fairfield, Iowa, United States
  • May 31st
HEAVILY USED #4MT MORSE TAPER LATHE DEAD CENTER (Point Diameter 1.246")

HEAVILY USED #4MT MORSE TAPER LATHE DEAD CENTER (Point Diameter 1.246")

  • Fairfield, Iowa, United States
  • May 31st
Gator FLE-250D6 D1-6 MACHINED CAST-IRON ADAPTER FOR 10' CHUCKS

Gator FLE-250D6 D1-6 MACHINED CAST-IRON ADAPTER FOR 10' CHUCKS

  • Duncan, South Carolina, United States
  • May 31st
Gator FLE-160D4 D1-4 MACHINED CAST-IRON ADAPTER FOR 6' CHUCKS

Gator FLE-160D4 D1-4 MACHINED CAST-IRON ADAPTER FOR 6' CHUCKS

  • Duncan, South Carolina, United States
  • May 31st
Gator 1-903-0800 8.25' 6 Jaw Self Centering Universal Lathe Chuck

Gator 1-903-0800 8.25' 6 Jaw Self Centering Universal Lathe Chuck

  • Duncan, South Carolina, United States
  • May 31st
Enco Model #42023 Drill Press Vise

Enco Model #42023 Drill Press Vise

  • Wethersfield, Connecticut, United States
  • Jun 1st
2 Piece Set Vintage Small Toolmakers Parallel Clamps Machinist Tools

2 Piece Set Vintage Small Toolmakers Parallel Clamps Machinist Tools

  • Broomfield, Colorado, United States
  • Jun 1st
# 3 CLAMP ON PIPE VISE HINGED TYPE PLUMBING TOOLS

# 3 CLAMP ON PIPE VISE HINGED TYPE PLUMBING TOOLS

  • Long Beach, California, United States
  • Jun 1st
2 MACHINIST ANGLE INSPECTION BLOCKS STEP RISER PRECISION TOOL DIE METAL WORKING

2 MACHINIST ANGLE INSPECTION BLOCKS STEP RISER PRECISION TOOL DIE METAL WORKING

  • Grayling, Michigan, United States
  • Jun 9th
6 MACHINIST PARALLELS INSPECTION BLOCKS I BEAM PRECISION TOOL DIE METAL WORKING

6 MACHINIST PARALLELS INSPECTION BLOCKS I BEAM PRECISION TOOL DIE METAL WORKING

  • Grayling, Michigan, United States
  • Jun 9th
Hardened and ground Vee block set

Hardened and ground Vee block set

  • Rathdrum, Idaho, United States
  • Jun 9th
Dumont Keyway Broach Bushing 1 9/16” Dia. x 3/8” Wide Slot x 2 1/2 ” Long

Dumont Keyway Broach Bushing 1 9/16” Dia. x 3/8” Wide Slot x 2 1/2 ” Long

  • Lake Saint Louis, Missouri, United States
  • Jun 9th
Dumont Keyway Broach Bushing 1 1/2 ” Dia. x 3/8” Wide Slot x 2 1/2 ” Long

Dumont Keyway Broach Bushing 1 1/2 ” Dia. x 3/8” Wide Slot x 2 1/2 ” Long

  • Lake Saint Louis, Missouri, United States
  • Jun 9th
Dumont Keyway Broach Bushing 1 7/16” Dia. x 3/8” Wide Slot x 2 1/2 ” Long

Dumont Keyway Broach Bushing 1 7/16” Dia. x 3/8” Wide Slot x 2 1/2 ” Long

  • Lake Saint Louis, Missouri, United States
  • Jun 9th
HAAS BRUSHLESS CONTROL BOX ROTARY TABLE INDEXER SCOL LMS

HAAS BRUSHLESS CONTROL BOX ROTARY TABLE INDEXER SCOL LMS

  • Sun Valley, California, United States
  • Jun 9th
7" x 7" Cross Slide Rotary Table

7" x 7" Cross Slide Rotary Table

  • DeKalb, Illinois, United States
  • Jun 9th
Haas Ha5C Brush Style 5C Collet Rotary Table Indexer 4th axis & servo control bo

Haas Ha5C Brush Style 5C Collet Rotary Table Indexer 4th axis & servo control bo

  • Schaumburg, Illinois, United States
  • Jun 9th
GoDog Dinos Bruto With Chew Guard Large-Purple

GoDog Dinos Bruto With Chew Guard Large-Purple

  • Hickory Hills, Illinois, United States
  • Jun 17th
"Cubics Platina Fixed Circular Needles 24""-Size 11/8mm"

"Cubics Platina Fixed Circular Needles 24""-Size 11/8mm"

  • Hickory Hills, Illinois, United States
  • Jun 17th
Magni-Clips Magnifiers-+1.00 Magnification

Magni-Clips Magnifiers-+1.00 Magnification

  • Hickory Hills, Illinois, United States
  • Jun 17th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies