+ Post new Ad
Starrett combination center, square, 12" scale, reversible protractor No. 490, US $420 – Picture 0
Starrett combination center, square, 12" scale, reversible protractor No. 490, US $420 – Picture 0

Starrett Combination Center, Square, 12" Scale, Reversible Protractor No. 490

US $420

  • Crown Point, Indiana, United States
  • Jun 25th
Open on mobile:
QR code
Here is a Starrett combination square 4 piece set. Each piece has been taken apart, polished, the paint touched up, and put back together. This has been carefully done to show you what kind of condition this set is in, very good. The 12" scale has No. 4GRAD L.S .STARRETT CO. ATHOL, MASS. U.S.A and HARDENED written on it. The reversible protractor has STARRETT No. 490 engraved on it and the square center head has nothing. There are no initials or engravings that are not supposed to be on any of the 4 pieces. Both the bubbles are intact and the scribe is still pointed. All of these pieces slide and move just as designed, very smooth! This set is used and has a few minor imperfections but still has many years of use left in it. This American made square set is ready to go to back to work and would make a great addition to any percision toolbox. Please look at all the photographs and they can describe the condition of this combination square set much better than I can. Thank you for looking and buy with confidence because your satisfaction is very important to me. As always, expect your item to be well packaged and shipped within 1 day with free shipping and 14 day money back guarantee.

Directions

Similar products from Measuring Squares

Vintage Starrett Square Head 50225 Category H33-1224 In Box!

Vintage Starrett Square Head 50225 Category H33-1224 In Box!

  • Glendora, California, United States
  • Jun 25th
Browne & Sharpe # 558 Precision 6" Graduated Cylinder Square In Mahogany Box

Browne & Sharpe # 558 Precision 6" Graduated Cylinder Square In Mahogany Box

  • Burlington, Vermont, United States
  • Jun 25th
STARRETT NO. 20 SQUARE , 6" USED IN NICE CONDITION.

STARRETT NO. 20 SQUARE , 6" USED IN NICE CONDITION.

  • Canby, Oregon, United States
  • Jun 25th
STANLEY 12" COMBINATION SQUARE

STANLEY 12" COMBINATION SQUARE

  • Yreka, California, United States
  • Jun 25th
S-T Scheer Tumico Combination Square: Square Head, Center Head, Protractor, Rule

S-T Scheer Tumico Combination Square: Square Head, Center Head, Protractor, Rule

  • Citrus Heights, California, United States
  • Jun 25th
Early L.S. Starrett Machinist Try Square Bevel Level Tool 12" Vtg

Early L.S. Starrett Machinist Try Square Bevel Level Tool 12" Vtg

  • Canton, Ohio, United States
  • Jun 25th
Fowler machinist square 10-1/2 x 6-3/8

Fowler machinist square 10-1/2 x 6-3/8

  • Victorville, California, United States
  • Jun 25th
Starrett 12" Comb. Hardened Blade,+ Square

Starrett 12" Comb. Hardened Blade,+ Square

  • North Pembroke, Massachusetts, United States
  • Jun 25th
Mitutoyo, Combination Set.

Mitutoyo, Combination Set.

  • Brantford, ON, Canada
  • Jun 25th
Vintage Lufkin Rule No. 166-3 3" Precision Machinist Square

Vintage Lufkin Rule No. 166-3 3" Precision Machinist Square

  • Coldwater, Ohio, United States
  • Jun 25th
Starrett,Machinist's Square,3",Hardened Steel,No. 20,L.S.S. Co

Starrett,Machinist's Square,3",Hardened Steel,No. 20,L.S.S. Co

  • Pellston, Michigan, United States
  • Jun 25th
VINTAGE STARRETT COMBINATION SET w PROTRACTOR & CENTER HEAD machinist tools *18

VINTAGE STARRETT COMBINATION SET w PROTRACTOR & CENTER HEAD machinist tools *18

  • Thomaston, Connecticut, United States
  • Jun 25th
BROWN & SHARPE No. 540 4-1/2" PRECISION MACHINIST SQUARE machinist tools *18

BROWN & SHARPE No. 540 4-1/2" PRECISION MACHINIST SQUARE machinist tools *18

  • Thomaston, Connecticut, United States
  • Jun 25th
Starrett No. 20 / 50130 Hardened Steel 3" Machinist Square

Starrett No. 20 / 50130 Hardened Steel 3" Machinist Square

  • Providence, Rhode Island, United States
  • Jun 25th
SMALL STARRETT No. 20 2" PRECISION MACHINIST SQUARE machinist tools *18

SMALL STARRETT No. 20 2" PRECISION MACHINIST SQUARE machinist tools *18

  • Thomaston, Connecticut, United States
  • Jun 25th
SMALL STARRETT No. 20 1" PRECISION MACHINIST SQUARE machinist tools *18

SMALL STARRETT No. 20 1" PRECISION MACHINIST SQUARE machinist tools *18

  • Thomaston, Connecticut, United States
  • Jun 25th
12" Combination Measuring Angle Tool Rule Tri- Square Steel Machinist Ruler

12" Combination Measuring Angle Tool Rule Tri- Square Steel Machinist Ruler

  • HK, Hong Kong
  • Jun 23rd
Starrett Combination Machinist Square 12" No. 4R Grad Hardened

Starrett Combination Machinist Square 12" No. 4R Grad Hardened

  • Sand Springs, Oklahoma, United States
  • Jun 23rd
Starrett Combination Machinist Square 6" No. 4R Grad Hardened

Starrett Combination Machinist Square 6" No. 4R Grad Hardened

  • Sand Springs, Oklahoma, United States
  • Jun 23rd
STARRETT COMBINATION SQUARE

STARRETT COMBINATION SQUARE

  • Dover, Pennsylvania, United States
  • Jun 23rd

People who viewed this item also vieved

ABSOLUTE MINI CALIPERS

ABSOLUTE MINI CALIPERS

  • Sonoma, California, United States
  • Jan 30th
ASSORTED SET OF STARRETT & MILLERS FALLS CALIPERS

ASSORTED SET OF STARRETT & MILLERS FALLS CALIPERS

  • Sonoma, California, United States
  • Jan 30th
NICE RENISHAW TP200 PROBE with Two STANDARD MODULES & STYLUS

NICE RENISHAW TP200 PROBE with Two STANDARD MODULES & STYLUS

  • Detroit, Michigan, United States
  • Jan 30th
Renishaw PH8 probe 5/8 inch diameter shank

Renishaw PH8 probe 5/8 inch diameter shank

  • Addison, Illinois, United States
  • Jan 30th
HP AGILENT 8657B HP AGILENT 8657B RF GENERATOR 100KHZ-2060MHZ

HP AGILENT 8657B HP AGILENT 8657B RF GENERATOR 100KHZ-2060MHZ

  • Hollister, California, United States
  • Jan 30th
Vintage Gage Blocks 23 Pieces - Machinist Gage Blocks Wood Holder Measuring Tool

Vintage Gage Blocks 23 Pieces - Machinist Gage Blocks Wood Holder Measuring Tool

  • Rehoboth, Massachusetts, United States
  • Jan 30th
Mitutoyo 2904F Dial Depth Gauge Indicator .001"

Mitutoyo 2904F Dial Depth Gauge Indicator .001"

  • Everett, Washington, United States
  • Jan 30th
Vintage Gem Instrument Manufacturing Co Dial Indicator Cleveland, OH

Vintage Gem Instrument Manufacturing Co Dial Indicator Cleveland, OH

  • Waldorf, Maryland, United States
  • Jan 30th
USED CHASO .8750" x 16 UN THREAD PLUG (GO PD: .8344)

USED CHASO .8750" x 16 UN THREAD PLUG (GO PD: .8344)

  • Fairfield, Iowa, United States
  • Jan 30th
Federal Snap Gauge 1-2 with Indicator .0001 graduation Lift Cables Gage

Federal Snap Gauge 1-2 with Indicator .0001 graduation Lift Cables Gage

  • Fond du Lac, Wisconsin, United States
  • Jan 30th
NEW 4 Piece Combo magnetic Tool Set

NEW 4 Piece Combo magnetic Tool Set

  • Tampa, Florida, United States
  • Jan 30th
Contour (Anyform) Magnetic Base for Indicators-New

Contour (Anyform) Magnetic Base for Indicators-New

  • Chino, California, United States
  • Jan 30th
STARRETT MICROMETER CALIPER T230RL 1" 10,000ths .0001" New Old Stock Unused

STARRETT MICROMETER CALIPER T230RL 1" 10,000ths .0001" New Old Stock Unused

  • Detroit, Michigan, United States
  • Jan 30th
MICROMETER PRECISION OUTSIDE 7" TO 8" RANGE .0001" GRADS STANDARD WRENCH CASE

MICROMETER PRECISION OUTSIDE 7" TO 8" RANGE .0001" GRADS STANDARD WRENCH CASE

  • Jamestown, New York, United States
  • Jan 30th
2 very RARE Bausch Lomb Optics lens grinding plenum CAST IRON steampunk upcycle

2 very RARE Bausch Lomb Optics lens grinding plenum CAST IRON steampunk upcycle

  • Hamlin, New York, United States
  • Jan 30th
Mitutoyo height gauge (515-319) 12" (.0001)

Mitutoyo height gauge (515-319) 12" (.0001)

  • West Covina, California, United States
  • Jan 30th
Mini Digital Protractor Inclinometer Angle Meter 360? Slope Angle Upright Magnet

Mini Digital Protractor Inclinometer Angle Meter 360? Slope Angle Upright Magnet

  • Hong Kong, Hong Kong
  • Jan 30th
GENERAL PROTRACTOR.NO. 17 + SOLID BRASS ROUTER DEPTH GAGE SEALED NO. 23 RULER

GENERAL PROTRACTOR.NO. 17 + SOLID BRASS ROUTER DEPTH GAGE SEALED NO. 23 RULER

  • Rockford, Illinois, United States
  • Jan 30th
10-32NF Thread Ring Gage GO P.D .1697 GTD Machinist Tool

10-32NF Thread Ring Gage GO P.D .1697 GTD Machinist Tool

  • York, Pennsylvania, United States
  • Jan 30th
12 INCH BROWN & SHARPE NO. 599-575-12 VERNIER CALIPER 12 INCH USED

12 INCH BROWN & SHARPE NO. 599-575-12 VERNIER CALIPER 12 INCH USED

  • Barre, Massachusetts, United States
  • Jan 30th
Starrett 24"X36" Stationary Surface Plate Stand, NOS, Showroom Model

Starrett 24"X36" Stationary Surface Plate Stand, NOS, Showroom Model

  • Attleboro, Massachusetts, United States
  • Jan 30th
Challenge Machine Precision Setup Plate 10" X 14"

Challenge Machine Precision Setup Plate 10" X 14"

  • Elkhart, Indiana, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies