+ Post new Ad
Starrett combination square, center, 18" scale and protractor - 4 piece set, US $303 – Picture 0
Starrett combination square, center, 18" scale and protractor - 4 piece set, US $303 – Picture 0

Starrett Combination Square, Center, 18" Scale And Protractor - 4 Piece Set

US $303

  • Crown Point, Indiana, United States
  • Jun 10th
Open on mobile:
QR code
Here is a Starrett combination square 4 piece set that has been given new life. Each and every piece has been taken apart, polished, scrubbed, repainted and put back together. This has been carefully done to rejuvenate this older square into the condition that it is in now. I think I have done a very good job!! The protractor has THE L.S.STARRETT CO. ATHOL, MASS. U.S.A. No. 12, on it the 18" scale has No. 4 L.S .STARRETT CO. ATHOL, MASS. U.S.A.along with the older Starrett logo written on it, and the square and center head has nothing. There are no initials or engravings that are not supposed to be on any of the 4 pieces. Both the bubbles are intact and even the scribe is still very sharp. All of these pieces slide and move just as designed, very smooth! This American made square set is ready to go to work and would make a great addition to any percision toolbox. Please look at all the photographs and they can describe the condition of this combination square set much better than I can. Thank you for looking and buy with confidence because your satisfaction is very important to me. As always, expect your item to be well packaged and shipped within 1 day with free shipping and 14 day money back guarantee.

Directions

Similar products from Measuring Squares

Starrett Solid Engineers Square No. 20 Hand Tool Machinist Woodworking Crafts

Starrett Solid Engineers Square No. 20 Hand Tool Machinist Woodworking Crafts

  • Florence, Oregon, United States
  • Jun 12th
Starrett 33HC-12-4R Combination Square, Forged And Hardened Steel Heads, Smooth

Starrett 33HC-12-4R Combination Square, Forged And Hardened Steel Heads, Smooth

  • USA, United States
  • Jun 12th
Old Used Tools,Starrett 12" Combination Square,Hardened,Tempered No. 4,Good Cond

Old Used Tools,Starrett 12" Combination Square,Hardened,Tempered No. 4,Good Cond

  • Torrington, Connecticut, United States
  • Jun 12th
PRECISION BRAND 78305 18" SQUARE RULER

PRECISION BRAND 78305 18" SQUARE RULER

  • Endicott, New York, United States
  • Jun 12th
Kaufhof ASS-5535 Precision Steel Squares Set 4 Piece

Kaufhof ASS-5535 Precision Steel Squares Set 4 Piece

  • USA, United States
  • Jun 12th
Lufkin No. 166 4-1/2" Machinist Square

Lufkin No. 166 4-1/2" Machinist Square

  • Saint Louis, Missouri, United States
  • Jun 10th
Lufkin No. 166 4-1/2" Machinist Square ~ Lot B

Lufkin No. 166 4-1/2" Machinist Square ~ Lot B

  • Saint Louis, Missouri, United States
  • Jun 10th
4pc 12" Combination Square Set - Square, Center, Protractor-NEW(103015-Shelf 03)

4pc 12" Combination Square Set - Square, Center, Protractor-NEW(103015-Shelf 03)

  • Spokane, Washington, United States
  • Jun 10th
Brown & Sharpe Camelback straight edge 72" x 2-1/4" Machinist tool

Brown & Sharpe Camelback straight edge 72" x 2-1/4" Machinist tool

  • Middlebury, Indiana, United States
  • Jun 10th
ALUMINUM ALLOY SQUARE HIP-VAL TOOL PIVOT

ALUMINUM ALLOY SQUARE HIP-VAL TOOL PIVOT

  • Deltona, Florida, United States
  • Jun 10th
KALMASTER GREENFIELD GAGE 7-1/2 LONG USA MADE TOOLMAKER MACHINIST INSPECTION QA!

KALMASTER GREENFIELD GAGE 7-1/2 LONG USA MADE TOOLMAKER MACHINIST INSPECTION QA!

  • Hayward, California, United States
  • Jun 10th
Brown & Sharpe 599-555-2 Metric/Inch Adjustable Double Square

Brown & Sharpe 599-555-2 Metric/Inch Adjustable Double Square

  • US, United States
  • Jun 10th
Fein 31309040002 RSs 638-5 Die

Fein 31309040002 RSs 638-5 Die

  • US, United States
  • Jun 10th
Fowler 52-432-246 Machinist Hardened Steel Square Set, 2", 3",4",and 6" Blade

Fowler 52-432-246 Machinist Hardened Steel Square Set, 2", 3",4",and 6" Blade

  • US, United States
  • Jun 10th
Starrett 20-24 Master Precision Square #50140, 24" Blade Length, Steel | (75H)

Starrett 20-24 Master Precision Square #50140, 24" Blade Length, Steel | (75H)

  • Saint Louis, Missouri, United States
  • Jun 10th
Combination Square P/N 7121-012-H 4R machine shop tools

Combination Square P/N 7121-012-H 4R machine shop tools

  • Ozark, Missouri, United States
  • Jun 10th
Machinist Precision Ground 2" Angle Block USA Tool & Die Maker #21

Machinist Precision Ground 2" Angle Block USA Tool & Die Maker #21

  • Chicago, Illinois, United States
  • Jun 10th
New Shinwa Straight Scale Silver 300mm With Stopper 76752 From Japan

New Shinwa Straight Scale Silver 300mm With Stopper 76752 From Japan

  • Japan, Japan
  • Jun 10th
18 inches Steel Engineers Try Square Precision Right Angle Measure 90 Degree

18 inches Steel Engineers Try Square Precision Right Angle Measure 90 Degree

  • New Delhi, India
  • Jun 10th
33H-4-4R Combination Square EDP50203 Starrett

33H-4-4R Combination Square EDP50203 Starrett

  • South Hackensack, New Jersey, United States
  • Jun 10th

People who viewed this item also vieved

Mitutoyo 500-422 Caliper

Mitutoyo 500-422 Caliper

  • Oxford, Massachusetts, United States
  • Jan 30th
4 pc Caliper Set by LUFKIN Machinist Black Oxide Finish

4 pc Caliper Set by LUFKIN Machinist Black Oxide Finish

  • Madison, Wisconsin, United States
  • Jan 30th
Helmel Cmm Mdl# 216-142 with Renishaw MH20i head

Helmel Cmm Mdl# 216-142 with Renishaw MH20i head

  • Sacramento, California, United States
  • Jan 30th
Renishaw TP20 Medium Force CMM Touch Probe

Renishaw TP20 Medium Force CMM Touch Probe

  • Clinton, New York, United States
  • Jan 30th
Starrett Global Series Gage Blocks

Starrett Global Series Gage Blocks

  • Salt Lake City, Utah, United States
  • Jan 30th
PLANER AND SHAPER GAGE HARDENED & GROUND FORGED STEEL

PLANER AND SHAPER GAGE HARDENED & GROUND FORGED STEEL

  • Columbus, Ohio, United States
  • Jan 30th
cdi digital indicator

cdi digital indicator

  • Cresskill, New Jersey, United States
  • Jan 30th
Federal Testmaster dial test indicator LT-83 , .0005" reading 2" D. face

Federal Testmaster dial test indicator LT-83 , .0005" reading 2" D. face

  • Addison, Illinois, United States
  • Jan 30th
BRAND NEW STARRETT NO. 155 SCREW PITCH GAGE GAGES NO RESERVE!!!!

BRAND NEW STARRETT NO. 155 SCREW PITCH GAGE GAGES NO RESERVE!!!!

  • Falkville, Alabama, United States
  • Jan 30th
NICE!! SUNNEN PRECISION DIAL BORE GAGE SET MDL# AG-300

NICE!! SUNNEN PRECISION DIAL BORE GAGE SET MDL# AG-300

  • La Puente, California, United States
  • Jan 30th
NOGA Magnetic Holder Bed - Model: DG0039 AUTO POWER: On/off switch

NOGA Magnetic Holder Bed - Model: DG0039 AUTO POWER: On/off switch

  • Flushing, New York, United States
  • Jan 30th
TTC "V" Blocks - Model: V.E.B.-7 Maximum Capacity Of Vee: 3-1/2"

TTC "V" Blocks - Model: V.E.B.-7 Maximum Capacity Of Vee: 3-1/2"

  • Flushing, New York, United States
  • Jan 30th
NEW STARRETT CENTER HEAD C33-1224 COMBINATION SQUARE SET MACHINIST TOOLS MIC B

NEW STARRETT CENTER HEAD C33-1224 COMBINATION SQUARE SET MACHINIST TOOLS MIC B

  • Sulphur, Louisiana, United States
  • Jan 30th
NEW 5PC PARTSMASTER SCREW EXTRACTORS EASY OUTS PROTO MACHINIST TOOLS STARRETT

NEW 5PC PARTSMASTER SCREW EXTRACTORS EASY OUTS PROTO MACHINIST TOOLS STARRETT

  • Sulphur, Louisiana, United States
  • Jan 30th
0-360 Degree Electronic Universal Bevel Protractor in Fitted Box, #S907-C885

0-360 Degree Electronic Universal Bevel Protractor in Fitted Box, #S907-C885

  • TORONTO, ONTARIO, Canada
  • Jan 30th
Phase II Portable Hardness Tester, 5 Yr Warranty, NIST Traceable, #PHT-1700

Phase II Portable Hardness Tester, 5 Yr Warranty, NIST Traceable, #PHT-1700

  • New Jeresy, Toronto, Canada
  • Jan 30th
GAUGE BLOCK-SPACE 36 PCS SET

GAUGE BLOCK-SPACE 36 PCS SET

  • Richmond, British Columbia, Canada
  • Jan 30th
DIGITAL MICROMETER 0~1"

DIGITAL MICROMETER 0~1"

  • Richmond, British Columbia, Canada
  • Jan 30th
TRIANGULAR SCALE RULE ARCHITECTURAL PLASTIC 12" NEW UNOPENED NIB

TRIANGULAR SCALE RULE ARCHITECTURAL PLASTIC 12" NEW UNOPENED NIB

  • Verona, Pennsylvania, United States
  • Jan 30th
Mitutoyo center head ruler

Mitutoyo center head ruler

  • Glenwood, New York, United States
  • Jan 30th
Granite Surface Plate 24"x24"x2.5" Predrilled Holes as Shown

Granite Surface Plate 24"x24"x2.5" Predrilled Holes as Shown

  • South El Monte, California, United States
  • Jan 30th
ASTRAL GRANITE SURFACE PLATE INDICATOR STAND

ASTRAL GRANITE SURFACE PLATE INDICATOR STAND

  • Prospect Heights, Illinois, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies