+ Post new Ad
STARRETT DIE MAKER SQUARE model 457C, US $51 – Picture 0
STARRETT DIE MAKER SQUARE model 457C, US $51 – Picture 0

Starrett Die Maker Square Model 457c

US $51

  • Merchantville, New Jersey, United States
  • May 27th
Open on mobile:
QR code
For Sale: New STARRETT DIE MAKER SQUARE model 457C -w- angular adjustments straight + off set, blades and holder.  Item has never been used and in excellent condition. It has been maintained in the tool box by a highly experienced Tool Maker with over 40 years’ experience. New purchase price online $242.99 Product detail The Starrett No. 457 Diemakers’ Square is a highly useful tool for tool and diemakers, especially for measuring die clearances. It is also very handy for patternmakers to check angles and drafts on patterns.  The beam of this square is graduated to show the setting in degrees of the blades. Blades can be set for any angle up to 10°, either side of 0° and the angle is indicated by the line on the pointer.  The graduated blade has 32nds of an inch on one side, and 64ths on the other. It is 5/32" (4mm) wide over a length of approximately 1-5/8" (41mm) and cut away at one end to a width of 3/32" (2.4mm).  The offset blade, which is used where it would be impossible to insert the straight blade, protrudes from the square about 1-1/2" (38mm). It is 1/8" (3mm) wide and both sides of each edge are beveled to give visual line contact.  The beam is beveled adjacent to the blade so that the blade is readily visible when checking in holes, slots, etc. Blades and beams are hardened and ground.

Directions

Similar products from Measuring Squares

SR2 PACKFU- SCHNEIDER ELECTRIC SR2B121FU 100-240VAC, SR2 B121FU Zelio Logic 2

SR2 PACKFU- SCHNEIDER ELECTRIC SR2B121FU 100-240VAC, SR2 B121FU Zelio Logic 2

  • Beverly Hills, California, United States
  • May 27th
DAYTON 32V132 Agitator Air Mixer,Size 55 Gallon *PA*

DAYTON 32V132 Agitator Air Mixer,Size 55 Gallon *PA*

  • Saint Louis, Missouri, United States
  • May 27th
Starrett C434-12-4R Combination Set with Square, Center and Reversing Protractor

Starrett C434-12-4R Combination Set with Square, Center and Reversing Protractor

  • USA, United States
  • May 27th
Mitutoyo 916-403 Precision Square, 6"

Mitutoyo 916-403 Precision Square, 6"

  • Elmhurst, Illinois, United States
  • May 27th
Vintage - universal bevel #47 - 6" - The L.S. Starrett Athol Mass. U.S.A.

Vintage - universal bevel #47 - 6" - The L.S. Starrett Athol Mass. U.S.A.

  • Pikesville, Maryland, United States
  • May 27th
MACHINIST TOOL LATHE MILL Starrett Combination Ruler Protactor Square Gage Gauge

MACHINIST TOOL LATHE MILL Starrett Combination Ruler Protactor Square Gage Gauge

  • Morris Plains, New Jersey, United States
  • May 27th
TCE Tools Machinist Toolmakers Square Edge, PL 3 - Set, 2 Blades, Case, 19111002

TCE Tools Machinist Toolmakers Square Edge, PL 3 - Set, 2 Blades, Case, 19111002

  • Saint Clair, Michigan, United States
  • May 27th
Brown and Sharpe 599-790 Pin Vises

Brown and Sharpe 599-790 Pin Vises

  • Millsboro, Delaware, United States
  • May 27th
Starrett C11H-4-4R 4-Inch Combination Square

Starrett C11H-4-4R 4-Inch Combination Square

  • USA, United States
  • May 27th
Starrett 434-12-4R 12-Inch Combination Set with Forged and Hardened Steel Square

Starrett 434-12-4R 12-Inch Combination Set with Forged and Hardened Steel Square

  • USA, United States
  • May 27th
BRAND NEW 18" X 8" CLASS 2 HIGH PRECISION SOLID STEEL SQUARE FREE SHIPPING

BRAND NEW 18" X 8" CLASS 2 HIGH PRECISION SOLID STEEL SQUARE FREE SHIPPING

  • Seekonk, Massachusetts, United States
  • May 27th
BRAND NEW 10 1/2" X 6 3/8" CLASS 2 HIGH PRECISION SOLID STEEL SQUARE FREE SHIP

BRAND NEW 10 1/2" X 6 3/8" CLASS 2 HIGH PRECISION SOLID STEEL SQUARE FREE SHIP

  • Seekonk, Massachusetts, United States
  • May 27th
Cen-Tech Combination Square, 12", 4 Piece

Cen-Tech Combination Square, 12", 4 Piece

  • Felton, California, United States
  • May 27th
Vintage L.S. Starrett 12" no. 4 grad. hardened blade combination square early

Vintage L.S. Starrett 12" no. 4 grad. hardened blade combination square early

  • United States, United States
  • May 27th
Square D by Schneider Electric 9013FSG2521M4 Air-Compressor Pressure Switch.

Square D by Schneider Electric 9013FSG2521M4 Air-Compressor Pressure Switch.

  • San Diego, California, United States
  • May 27th
Nicholls MFG CO Hardened Corners Precision Contractor Speed Square 24" x 16"

Nicholls MFG CO Hardened Corners Precision Contractor Speed Square 24" x 16"

  • Kennewick, Washington, United States
  • May 27th
MITUTOYO COMBINATION SQUARE SET W/24'' PRATT & WHITNEY BLADE No.2504R

MITUTOYO COMBINATION SQUARE SET W/24'' PRATT & WHITNEY BLADE No.2504R

  • Stevensville, Michigan, United States
  • May 27th
Starrett 289A Combination Square Right Angle Attachment

Starrett 289A Combination Square Right Angle Attachment

  • Chicago, Illinois, United States
  • May 27th
SPI 4 PC 4R HARDENED COMBINATION SQUARE SET 12"

SPI 4 PC 4R HARDENED COMBINATION SQUARE SET 12"

  • Steubenville, Ohio, United States
  • May 27th
MITUTOYO PRECISION SQUARE 20" 916-308 MACHINIST

MITUTOYO PRECISION SQUARE 20" 916-308 MACHINIST

  • Naperville, Illinois, United States
  • May 27th

People who viewed this item also vieved

Brown & Sharpe 577 6" Caliper

Brown & Sharpe 577 6" Caliper

  • Hoffman Estates, Illinois, United States
  • Jan 30th
CALIPER 6 inch Mechanical "STARRETT" with case

CALIPER 6 inch Mechanical "STARRETT" with case

  • Sequim, Washington, United States
  • Jan 30th
HELD 1.033 GAGE GO

HELD 1.033 GAGE GO

  • Bloomington, California, United States
  • Jan 30th
2 VINTAGE STARRETT GUAGES

2 VINTAGE STARRETT GUAGES

  • China Village, Maine, United States
  • Jan 30th
Large Edmund Scientific optical magnifier with case 3" base

Large Edmund Scientific optical magnifier with case 3" base

  • North Ridgeville, Ohio, United States
  • Feb 13th
Starrett micrometer gage gauge plunger .250" range movable face surface depth

Starrett micrometer gage gauge plunger .250" range movable face surface depth

  • North Ridgeville, Ohio, United States
  • Feb 13th
Starrett 436.1 1-2" OD Micrometer, Starrett 436.1 2-3-'OD Micrometer Ratchets

Starrett 436.1 1-2" OD Micrometer, Starrett 436.1 2-3-'OD Micrometer Ratchets

  • Boise, Idaho, United States
  • Feb 13th
Clean Mitutoyo LSM-3403V Laser Scan Micrometer

Clean Mitutoyo LSM-3403V Laser Scan Micrometer

  • Chino, California, United States
  • Feb 13th
New in box Mitutoyo 965014 Digimatic Connecting Cable

New in box Mitutoyo 965014 Digimatic Connecting Cable

  • Wixom, Michigan, United States
  • Mar 4th
ST Industries Counter weight ML23241

ST Industries Counter weight ML23241

  • Waterford, Michigan, United States
  • Mar 5th
Used J&L 94602 Trump Ross Rotary Encoder P/N 0100/254-D13G-6L6 S/N 814.

Used J&L 94602 Trump Ross Rotary Encoder P/N 0100/254-D13G-6L6 S/N 814.

  • Lancaster, Pennsylvania, United States
  • Mar 5th
Faro Laser Tracker Parts - Chassis For Laser Tracker - MetrologyWorks More Avail

Faro Laser Tracker Parts - Chassis For Laser Tracker - MetrologyWorks More Avail

  • Buckner, Missouri, United States
  • Mar 5th
STARRETT YANKEE SPRING-TYPE DIVIDERS 4 INCH SOLID NUT NO.83A-4

STARRETT YANKEE SPRING-TYPE DIVIDERS 4 INCH SOLID NUT NO.83A-4

  • Barre, Massachusetts, United States
  • Mar 5th
PIONEER USA TOOLS STAINLESS STEEL RULER 6 INCH LONG-RARE

PIONEER USA TOOLS STAINLESS STEEL RULER 6 INCH LONG-RARE

  • The Villages, Florida, United States
  • Mar 5th
Fowler 52-585-005 Magnetic Base, 2" x 2-11/32" x 1-13/16" Base dimensions

Fowler 52-585-005 Magnetic Base, 2" x 2-11/32" x 1-13/16" Base dimensions

  • USA, United States
  • May 24th
Unique Starrett 657P Magnetic Base Only

Unique Starrett 657P Magnetic Base Only

  • Vale, Oregon, United States
  • May 24th
Micro Flat Precision Grade A Block INSPECTION SURFACE Plate 24"x18"x4" Step

Micro Flat Precision Grade A Block INSPECTION SURFACE Plate 24"x18"x4" Step

  • Canoga Park, California, United States
  • May 24th
Do all. Doall GRANITE SURFACE PLATE WITH HEAVY METAL STAND 4FT X 8T 48x96

Do all. Doall GRANITE SURFACE PLATE WITH HEAVY METAL STAND 4FT X 8T 48x96

  • Glenwood, New York, United States
  • May 24th
Digital Protractor Denali 10-Inch NEW Retail Package

Digital Protractor Denali 10-Inch NEW Retail Package

  • Boca Raton, Florida, United States
  • May 26th
Mitutoyo 950-315 Digital Protractor Digital Level Pro360 6"

Mitutoyo 950-315 Digital Protractor Digital Level Pro360 6"

  • Bettendorf, Iowa, United States
  • May 26th
Mitutoyo Ceramic Rectangular Gage Block, ASME Grade 0, 1.01 mm Length

Mitutoyo Ceramic Rectangular Gage Block, ASME Grade 0, 1.01 mm Length

  • USA, United States
  • May 28th
Mitutoyo Steel Rectangular Gage Block, ASME Grade AS-1, 10 mm Length

Mitutoyo Steel Rectangular Gage Block, ASME Grade AS-1, 10 mm Length

  • USA, United States
  • May 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies