+ Post new Ad
Starrett Machinist's V-Block #578, US $57 – Picture 0
Starrett Machinist's V-Block #578, US $57 – Picture 1
Starrett Machinist's V-Block #578, US $57 – Picture 2
Starrett Machinist's V-Block #578, US $57 – Picture 0
Starrett Machinist's V-Block #578, US $57 – Picture 1
Starrett Machinist's V-Block #578, US $57 – Picture 2

Starrett Machinist's V-block #578

US $57

  • Mount Airy, North Carolina, United States
  • Jan 30th
Open on mobile:
QR code
Starrett Machinist's V-Block #578.  Not in Original box.   It has a min. cap. of V: 9/16" and max. cap. of V: 4".  It is made from hardened steel.  Precision ground flat, square and parallel.  Reversible hardened clamp.  No clamp interference when the block lies on either side.  Three available clamp positions.  The quality V-block has only very minor cosmetic discoloration and is in excellent condition.   Sells new for over $700.   This was my tool and I took excellent care of it...
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Starrett
Brand Starrett
Country/Region of Manufacture United States
Model Machinists V-Block #578

Directions

Similar products from Supporting Blocks & Sets

L.S. Starrett No. 271 Drill Block and Clamp. Plus Additional clamp (Non starret

L.S. Starrett No. 271 Drill Block and Clamp. Plus Additional clamp (Non starret

  • Kennewick, Washington, United States
  • Jan 30th
vintage Machinist blocks set in wood box Cook Research Laboratory Menlo Park Ca

vintage Machinist blocks set in wood box Cook Research Laboratory Menlo Park Ca

  • Springfield, Missouri, United States
  • Jan 30th
20 pc. Machinist Tools Parallel Set

20 pc. Machinist Tools Parallel Set

  • Tucson, Arizona, United States
  • Jan 30th
Starrett Model 271 Vee Blocks with Clamp & Rod

Starrett Model 271 Vee Blocks with Clamp & Rod

  • Garden City, Idaho, United States
  • Jan 30th
Generic 2' x 3" x 1-3/8" Vee Blocks Set of 2

Generic 2' x 3" x 1-3/8" Vee Blocks Set of 2

  • Garden City, Idaho, United States
  • Jan 30th
MHC Precision Parallel Set BRAND NEW!

MHC Precision Parallel Set BRAND NEW!

  • Montrose, Michigan, United States
  • Jan 30th
THREE V BLOCKS - 2 - 3" AND 1- 2 3/4"

THREE V BLOCKS - 2 - 3" AND 1- 2 3/4"

  • Newbury, Ohio, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist Collets Tap Wrench Gears Circle Cutter Etc

MACHINIST LATHE MILL Lot of Machinist Collets Tap Wrench Gears Circle Cutter Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist Cutters Gears Parts Etc

MACHINIST LATHE MILL Lot of Machinist Cutters Gears Parts Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
PARALLELS HARRINGTON TOOL CO 3/8 X 1.5 X 9 3/16 L

PARALLELS HARRINGTON TOOL CO 3/8 X 1.5 X 9 3/16 L

  • Champlain, New York, United States
  • Jan 30th
Machinists 12/5B BUY NOW Nick Free USA Set up Pads/bars Goody Bag # 16

Machinists 12/5B BUY NOW Nick Free USA Set up Pads/bars Goody Bag # 16

  • Lutz, Florida, United States
  • Jan 30th
Big V Block

Big V Block

  • Bronson, Florida, United States
  • Jan 30th
V Block an clamp

V Block an clamp

  • Bronson, Florida, United States
  • Jan 30th
Machinists 11/28A Buy NOW usa small set up Bars X 2

Machinists 11/28A Buy NOW usa small set up Bars X 2

  • Lutz, Florida, United States
  • Jan 30th
ToolMaker Set 1

ToolMaker Set 1

  • Brooklyn, New York, United States
  • Jan 30th
ToolMaker Set 2

ToolMaker Set 2

  • Brooklyn, New York, United States
  • Jan 30th
Mitutoyo 181-941 Universal V-Blocks great shape 181941

Mitutoyo 181-941 Universal V-Blocks great shape 181941

  • Harrisburg, Pennsylvania, United States
  • Jan 30th
Mitutoyo 181-951 Micro Parallels Like great shape, In Box 181951

Mitutoyo 181-951 Micro Parallels Like great shape, In Box 181951

  • Harrisburg, Pennsylvania, United States
  • Jan 30th
General Machinist Toolmaker's "V" Block & Clamp Set - Model: 117 0871-34 3

General Machinist Toolmaker's "V" Block & Clamp Set - Model: 117 0871-34 3

  • Hillsdale, New Jersey, United States
  • Jan 30th
Starrett No. 54B 5 in. Hold Downs

Starrett No. 54B 5 in. Hold Downs

  • Commerce City, Colorado, United States
  • Jan 30th

People who viewed this item also vieved

HHIP 3900-5053 MT3 7 Piece Interchangeable Bull Nose Live Center Set

HHIP 3900-5053 MT3 7 Piece Interchangeable Bull Nose Live Center Set

  • USA, United States
  • Jun 7th
HHIP 3900-5026 MT4 Precision Extended Live Center

HHIP 3900-5026 MT4 Precision Extended Live Center

  • USA, United States
  • Jun 7th
5-1/2" OD Live Center 2" Straight Shank

5-1/2" OD Live Center 2" Straight Shank

  • Lorain, Ohio, United States
  • Jun 7th
L-00 L00 Plate Blank 7.5"

L-00 L00 Plate Blank 7.5"

  • Madison Heights, Virginia, United States
  • Jun 8th
Lathe Dog Driver Plate 5 3/4" Dia. L0 Mount D5670

Lathe Dog Driver Plate 5 3/4" Dia. L0 Mount D5670

  • Long Beach, California, United States
  • Jun 8th
AMF MILLIMG CLAMPS VISES

AMF MILLIMG CLAMPS VISES

  • Gatineau, Quebec, Canada
  • Jun 8th
Hardinge 3/16" x 1/4" Rectangular # 5C Collet

Hardinge 3/16" x 1/4" Rectangular # 5C Collet

  • Coventry, Rhode Island, United States
  • Jun 9th
Lyndex 5c Collets New - "Choose One Size" 7/16",15/32", 21/32", 23/32", 29/32"

Lyndex 5c Collets New - "Choose One Size" 7/16",15/32", 21/32", 23/32", 29/32"

  • Auburn, New York, United States
  • Jun 9th
machinist lot x3 collet lyndex 5c and more

machinist lot x3 collet lyndex 5c and more

  • Berlin, Maryland, United States
  • Jun 9th
Free Shipping M10 58pc 7/16" Slot ,3/8" Stud Metex Milling Machine Clamping Set

Free Shipping M10 58pc 7/16" Slot ,3/8" Stud Metex Milling Machine Clamping Set

  • El Monte, California, United States
  • Jun 9th
Vintage Armstrong No. 11 Heavy Duty Service Bridge C Clamp Tool 1-7/8"opening

Vintage Armstrong No. 11 Heavy Duty Service Bridge C Clamp Tool 1-7/8"opening

  • Salinas, California, United States
  • Jun 9th
Vintage Armstrong No 9 Heavy Duty Service Bridge C Clamp 13/16" opening

Vintage Armstrong No 9 Heavy Duty Service Bridge C Clamp 13/16" opening

  • Salinas, California, United States
  • Jun 9th
Athol 614 Vise Fixed Base 4 Inch Jaws Heavy Vintage Vice

Athol 614 Vise Fixed Base 4 Inch Jaws Heavy Vintage Vice

  • Prior Lake, Minnesota, United States
  • Jun 9th
Wilton Vise 6" Combination pipe HUGE 150lbs

Wilton Vise 6" Combination pipe HUGE 150lbs

  • Millstadt, Illinois, United States
  • Jun 9th
2 Small Clamps / Vices with Beveled Edge 1-1/2" Free USA Shipping!

2 Small Clamps / Vices with Beveled Edge 1-1/2" Free USA Shipping!

  • Darien Center, New York, United States
  • Jun 9th
Abbott MTG8MDP Style D 3pc Pie Jaw Set for 8" Chuck

Abbott MTG8MDP Style D 3pc Pie Jaw Set for 8" Chuck

  • Venice, Florida, United States
  • Jun 9th
Buck Chuck 8” A1-6 Mount Set Thru Lathe Chuck Backing Plate

Buck Chuck 8” A1-6 Mount Set Thru Lathe Chuck Backing Plate

  • Venice, Florida, United States
  • Jun 9th
NICE HARDINGE MODEL SLIDE W/ TOOL HOLDER

NICE HARDINGE MODEL SLIDE W/ TOOL HOLDER

  • El Monte, California, United States
  • Jun 9th
LARGE LOT OF 38 LATHE COLLET TOOLS W/ 3 DRILL BIT CHUCKS + OTHER ACCESORIES

LARGE LOT OF 38 LATHE COLLET TOOLS W/ 3 DRILL BIT CHUCKS + OTHER ACCESORIES

  • Centralia, Illinois, United States
  • Oct 30th
SCREW MACHINE SPINDLE INSERTS SLEEVES COLLET HOLDERS 3" OD BEARINGS (3) #61957

SCREW MACHINE SPINDLE INSERTS SLEEVES COLLET HOLDERS 3" OD BEARINGS (3) #61957

  • Resaca, Georgia, United States
  • Oct 30th
SCREW MACHINE SPINDLE INSERTS SLEEVES COLLET HOLDERS (QTY 4) #61956

SCREW MACHINE SPINDLE INSERTS SLEEVES COLLET HOLDERS (QTY 4) #61956

  • Resaca, Georgia, United States
  • Oct 30th
PALMGREN 96-37123 Cross Slide Milling Table 6 X 12 NEW

PALMGREN 96-37123 Cross Slide Milling Table 6 X 12 NEW

  • Palmyra, Pennsylvania, United States
  • Nov 14th
NIKKEN 7-1/2" INDEXING HORIZONTAL VERTICAL SUPER SPACER W MASKING PLATES & CHUCK

NIKKEN 7-1/2" INDEXING HORIZONTAL VERTICAL SUPER SPACER W MASKING PLATES & CHUCK

  • Chino, California, United States
  • Nov 14th
New Rotary Table 4" inch (100 mm) Tilting Model for Milling Machine

New Rotary Table 4" inch (100 mm) Tilting Model for Milling Machine

  • New Delhi, Delhi, India
  • Nov 14th
kitagawa & Nikko Chuck Bundle

kitagawa & Nikko Chuck Bundle

  • Lincolnton, North Carolina, United States
  • May 27th
USED 12” SOFT CHUCK JAWS 654-12-SF Production Turning

USED 12” SOFT CHUCK JAWS 654-12-SF Production Turning

  • Mountainhome, Pennsylvania, United States
  • May 28th
HFS 3" X 4” Premium Super Precision Grinding Toolmaker Vise

HFS 3" X 4” Premium Super Precision Grinding Toolmaker Vise

  • Chula Vista, California, United States
  • May 29th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies