+ Post new Ad
Starrett No. 579 telescoping gages - set of 6, US $190 – Picture 0
Starrett No. 579 telescoping gages - set of 6, US $190 – Picture 0

Starrett No. 579 Telescoping Gages - Set Of 6

US $190

  • Crown Point, Indiana, United States
  • Jun 21st
Open on mobile:
QR code
Here is a set of Starrett No. 579 telescoping gages that are in very good condition. This set has been used so you may find few minor dings, dents, or scratches but nothing that would hinder their performance. There are no initials or engravings on any of the six gages just a few minor imperfections. All of these gages "snap" open and lock in place, just as designed. The protective case is still pliable, the snap works perfectly, the lettering has faded a little, and there is some black smudgeson the inside of this case. Someone autographed the front of this case. It hase been blacked out and covered with red duct tape. I think it looks a lot better. Please don't let the case imperfections take away from what is otherwise a very nice used set. These American made tools are ready to go back to work and would make a great addition to any percision toolbox or tool collection. Please look at all the photographs as they can describe the condition of this telescoping gage set much better than I can. Thank you for looking and buy with confidence because your satisfaction is very important to me. If you purchase, always expect your item to be shipped within one day with free shipping and a no question 14 day money back guarantee.

Directions

Similar products from Multidetectors & Inspection Gauges

4" FLAT ANVIL FOR WILSON ROCKWELL HARDNESS TESTER

4" FLAT ANVIL FOR WILSON ROCKWELL HARDNESS TESTER

  • Pinellas Park, Florida, United States
  • Jun 21st
Starrett surface gage

Starrett surface gage

  • Bangor, Maine, United States
  • Jun 21st
8 PIECE 9/16" TO 1' BY 16THS. RADIUS GAGE SET

8 PIECE 9/16" TO 1' BY 16THS. RADIUS GAGE SET

  • Hanover Park, Illinois, United States
  • Jun 21st
Machinist Metal Lathe Bit Cutting Arm Holder SETUP Block Vise Tools

Machinist Metal Lathe Bit Cutting Arm Holder SETUP Block Vise Tools

  • Wallingford, Connecticut, United States
  • Jun 21st
Reli-A-Chek Dial Bore Gage .125-.250

Reli-A-Chek Dial Bore Gage .125-.250

  • Los Altos, California, United States
  • Jun 21st
height gauge carbide scriber

height gauge carbide scriber

  • Etobicoke, Ontario, Canada
  • Jun 21st
GOODELL-PRATT CO. DEPTH GAGE Machinist Gun Smith Tools

GOODELL-PRATT CO. DEPTH GAGE Machinist Gun Smith Tools

  • Wallingford, Connecticut, United States
  • Jun 21st
VINTAGE Precision Octagon Height Gages Set GAGE Machinist Tools

VINTAGE Precision Octagon Height Gages Set GAGE Machinist Tools

  • Wallingford, Connecticut, United States
  • Jun 21st
TC Thread Measuring Wires 16 Sets 3 Ea.

TC Thread Measuring Wires 16 Sets 3 Ea.

  • Porter, Texas, United States
  • Jun 21st
Pennoyer Dodge LEFT HAND GO Thread Plug Gage - 1-3/4", 1.75-20 UNF-2B

Pennoyer Dodge LEFT HAND GO Thread Plug Gage - 1-3/4", 1.75-20 UNF-2B

  • Compton, California, United States
  • Jun 21st
New Meyer Gage Co. Pin Gauge, Size 0.395, Tolerance Minus

New Meyer Gage Co. Pin Gauge, Size 0.395, Tolerance Minus

  • Bristol, Connecticut, United States
  • Jun 21st
New Meyer Gage Co. Pin Gauge, Size 0.315, Tolerance Minus

New Meyer Gage Co. Pin Gauge, Size 0.315, Tolerance Minus

  • Bristol, Connecticut, United States
  • Jun 21st
New Meyer Gage Co. Pin Gauge, Size 0.3810, Tolerance Minus

New Meyer Gage Co. Pin Gauge, Size 0.3810, Tolerance Minus

  • Bristol, Connecticut, United States
  • Jun 21st
Mitutoyo Telescoping Gages Set H 155-903 6 PC. 5/16"-6" Machinist Tools Japan

Mitutoyo Telescoping Gages Set H 155-903 6 PC. 5/16"-6" Machinist Tools Japan

  • Humble, Texas, United States
  • Jun 21st
High Performance Brass 16 in. Dual Scale Welder Regulator Welding Gas Gauges

High Performance Brass 16 in. Dual Scale Welder Regulator Welding Gas Gauges

  • Mesa, Arizona, United States
  • Jun 21st
New Meyer Gage Co. Pin Gauge, Size 0.3800, Tolerance Minus

New Meyer Gage Co. Pin Gauge, Size 0.3800, Tolerance Minus

  • Bristol, Connecticut, United States
  • Jun 21st
Lot of (2) New Meyer Gage Co. Pin Gauges, Size 0.1970, Tolerance Minus

Lot of (2) New Meyer Gage Co. Pin Gauges, Size 0.1970, Tolerance Minus

  • Bristol, Connecticut, United States
  • Jun 21st
Lot of (2) New Meyer Gage Co. Pin Gauges, Size 0.306, Tolerance Minus

Lot of (2) New Meyer Gage Co. Pin Gauges, Size 0.306, Tolerance Minus

  • Bristol, Connecticut, United States
  • Jun 21st
HUGE MISC LOT Precision Machinist Tools Gage Block Caliper Dial Milling Bits

HUGE MISC LOT Precision Machinist Tools Gage Block Caliper Dial Milling Bits

  • Wallingford, Connecticut, United States
  • Jun 21st
Lot of (2) New Meyer Gage Co. Pin Gauges, Size 0.337, Tolerance Minus

Lot of (2) New Meyer Gage Co. Pin Gauges, Size 0.337, Tolerance Minus

  • Bristol, Connecticut, United States
  • Jun 21st

People who viewed this item also vieved

MITUTOYO 293-723-30 Digital Micrometer, 2-3 inch, 0.001 mm with case

MITUTOYO 293-723-30 Digital Micrometer, 2-3 inch, 0.001 mm with case

  • Minneapolis, Minnesota, United States
  • Jan 30th
NEW Mitutoyo 0"-8" Calipers 500-172-30

NEW Mitutoyo 0"-8" Calipers 500-172-30

  • Danbury, Connecticut, United States
  • Jan 30th
Faro Arm 1/4in Zircon probe M6 Thread for Faro arm (Gold, Silver, Bronze) OEM

Faro Arm 1/4in Zircon probe M6 Thread for Faro arm (Gold, Silver, Bronze) OEM

  • Lee's Summit, Missouri, United States
  • Jan 30th
Jones & Lamson TC-10 Comparator Magnifyer

Jones & Lamson TC-10 Comparator Magnifyer

  • Jackson, Michigan, United States
  • Jan 30th
Machinist Moldmaker Toolmaker Milling Set-Up Sine Bar Block Gage (#3)

Machinist Moldmaker Toolmaker Milling Set-Up Sine Bar Block Gage (#3)

  • Elmhurst, Illinois, United States
  • Jan 30th
STARRETT 52627 599 PLANER &SHAPER GAGE

STARRETT 52627 599 PLANER &SHAPER GAGE

  • Cleveland, Ohio, United States
  • Jan 30th
Interapid 312b-1 Jeweled Switzerland .0005 with Dog Leg Axle and Extras

Interapid 312b-1 Jeweled Switzerland .0005 with Dog Leg Axle and Extras

  • Clyde, Texas, United States
  • Jan 30th
Mitutoyo Test Indicaotr Model 513-403 Resolution .0001"

Mitutoyo Test Indicaotr Model 513-403 Resolution .0001"

  • Waynesville, Ohio, United States
  • Jan 30th
Phase II 900-611 Ultra Thin Parallel Set, 20 Pcs, 1/2" to 1-11/16", 1/32" Thick

Phase II 900-611 Ultra Thin Parallel Set, 20 Pcs, 1/2" to 1-11/16", 1/32" Thick

  • Springfield, Illinois, United States
  • Jan 30th
KURT 8 Piece 6PJS Parallel Set

KURT 8 Piece 6PJS Parallel Set

  • Springfield, Illinois, United States
  • Jan 30th
Mahr 30EX Digital Depth Gage

Mahr 30EX Digital Depth Gage

  • Cresskill, New Jersey, United States
  • Jan 30th
Comtorgage CM2 Amplifier

Comtorgage CM2 Amplifier

  • Cresskill, New Jersey, United States
  • Jan 30th
2'' travel micrometer stop (micrometer head) made in west germany

2'' travel micrometer stop (micrometer head) made in west germany

  • Frankfort, Kentucky, United States
  • Jan 30th
Vintage Standard Wire Gauge - Brown & Sharpe Mfg. Co.

Vintage Standard Wire Gauge - Brown & Sharpe Mfg. Co.

  • Brookfield, Illinois, United States
  • Jan 30th
INSIZE 2372-360 Protractor 0-360

INSIZE 2372-360 Protractor 0-360

  • United States
  • Jan 30th
INSIZE 2172-360 Electronic Digital Protractor 0-360

INSIZE 2172-360 Electronic Digital Protractor 0-360

  • United States
  • Jan 30th
Starrett 1604R-6 6" Stainless Steel Rule, 8ths, 16ths, 32nds, 64ths Graduations

Starrett 1604R-6 6" Stainless Steel Rule, 8ths, 16ths, 32nds, 64ths Graduations

  • Attleboro, Massachusetts, United States
  • Jan 30th
STARRETT NO. 711 LAST WORD DIAL TEST INDICATOR W/ ACCESSORIES .001 GRADS

STARRETT NO. 711 LAST WORD DIAL TEST INDICATOR W/ ACCESSORIES .001 GRADS

  • Barre, Massachusetts, United States
  • Jan 30th
MACHINIST LATHE MILL Starrrett Hardened Beveled Edge Steel Machinist Square

MACHINIST LATHE MILL Starrrett Hardened Beveled Edge Steel Machinist Square

  • Morris Plains, New Jersey, United States
  • Jan 30th
Starrett 14MD Double Steel Square W/ Hardened, Ground Head And Blade, 50mm SZ

Starrett 14MD Double Steel Square W/ Hardened, Ground Head And Blade, 50mm SZ

  • Richmond Hill, New York, United States
  • Jan 30th
18" x 12" x 4" Granite Inspection Surface Plate Bench Table Top MP-121

18" x 12" x 4" Granite Inspection Surface Plate Bench Table Top MP-121

  • Fleetwood, Pennsylvania, United States
  • Jan 30th
18" x 12" x 4-1/2" Granite Inspection Surface Plate Bench Table Top

18" x 12" x 4-1/2" Granite Inspection Surface Plate Bench Table Top

  • Fleetwood, Pennsylvania, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies