US $130
Condition: |
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully
operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
...
|
Manufacturer | L S STARRETT 271C |
MPN | 51295 | ||
Country/Region of Manufacture | United States | ||
Brand | Starrett | ||
Model | 271C |
Directions
Similar products from Supporting Blocks & Sets
MACHINIST LATHE MILL Machinist 2 Lufkin Hold Down Parallel Block s
STARRETT OFFSET V-BLOCK #567 MACHINIST-TOOLMAKER, INSPECTION, MILLING, GRINDING
Tietzmann #1 Ball Bearing Parallel Set of 4
MACHINIST PARALLEL BLOCKS - BRIDGEPORT - INSPECTION 1-45 ANGLE & 10 PAIRS + 1
MACHINIST LATHE MILL 2 Machinist Adjustable Milling Table Hold Down Clamps
MACHINIST LATHE MILL Machinist Lot of Brass Chuck Tool Holders Cutter Parts Etc
MACHINIST LATHE MILL Machinist Lot Starrett Gages Cutters Hold Downs Parts Etc
Vintage L.S.Starrett #161 B Machinist Parallel Clamps, Set of 2
MHC - Setup Blocks Type: 1-2-3 Block Overall Width 1 "
Starrett V Blocks No. 268, 271, Pin Vices & Parallel Clamps
Brown And Sharpe 0 To 60 Degree Precision Angle Block 38n972
Used TAFT PEIRCE 9130 No. 39P Machinists V Block And Clamp Inspection Tool
Used Machinist tools sine block spacers elco clamp parallel Doall Weber Starrett
V Block, Brown & Sharpe No. 750-B Machinist Inspection V Block, USA
L.S. STARRETT CO.~Set of 3 V-BLOCKS No. 271, 3 CLAMPS, & ALIGNING ROD Nice
MAGNETIC CHUCK V BLOCKS AND PARALLEL BLOCKS 2 STARRETT PARALLELS For Grinder
MACHINIST LATHE MILL Machinist Lot Pillow Block Pedal Round Stock Part Chuck Etc
RALMIKE ANGLE PLATE # 097-023 AMERICAN MADE
MACHINIST LATHE MILL Machinist Right Angle Set Up Block Plate Fixture Dovetail
People who viewed this item also vieved
Lot of 5 R8 Collet from 1/8" to 11/16" similar to Shar hardinge or Lyndex R#0199
Lot of 4 R8 Collets from 1/8" to 7/16" similar to Shar hardinge or Lyndex R#0198
Lot of 6 R8 Collets from 1/8" to 3/4" similar to Shar hardinge or Lyndex R#0200
Lot of 2 C Clamps - 5" Havens Steele, Kansas City & 4" Blue Clamp
Wilton USA 6" 406 Drop Forged Steel C Clamp Work Holding Welding Tool
JAPAN! TC 5C COLLET HORIZONTAL / VERTICAL FIXTURE w/ ROYAL 7/16" COLLET
2 FOWLER & CWC HEX 5C COLLETS - 1/4" & 1/2"
Engine Lathe 4 Jaw Chuck 15 1/2 ” OD x 3 7/8” ID A1-11” Mount
Engine Lathe 4 Jaw Chuck 15” Dia. x 3 1/4 ” ID A1-8” Mount Sweden
3-Jaw Chuck; 8 1/2"; Cushman 80234D3 (CTAM# 7232)
Swivel Base for Machinery Vise Fits Kurt D60 Nice Shape No Resv.
VINTAGE REED MFG. CO. NO.104 MACHINIST VISE 4" JAW
Swivel Base for Machinery Vise Nice Shape #3 No Resv.
SOUTH BEND ATLAS ROCKWELL 6" FACEPLATE 1-1/2"-8 9" & 10K LATHE DOUBLE DOG PLATE
NEIDLEIN BULL NOSE CARBIDE DEAD CENTER 30-50MM MT3
Compound Slide Stop for Sherline lathes - from LatheCity
Suburban Tool 6" x 6" x 4" Hardened Steel Precision V-Block With Clamp
0 - 600mm Double Beam Height Gage with Counter
0 - 450mm Double Beam Height Gage with Counter
ERON No. 308 CROSSLIDE ROTARY TABLE 8INCH DIAMETER
SMW RT 160 PY Rotary Indexer CNC 4th Axis Rotary Table
4th Axis CNC Rotary Table Full Fourth Axis Centroid RT-200
Sizzix Textured Impressions Plus Embossing Folder-Field Of Diamonds
Valenite V50CT-10SG-35 TG-100 Collet Chuck CAT-50 V-Flange Taper Shank
Devlieg 50CT-10SG-55 TG-100 Collet Chuck CAT-50 V-Flange Taper Shank
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies