US $59.99
| Condition: |
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully
operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
...
|
Manufacturer | L.S. STARRETT Co. |
| MPN | 50276 | ||
| Country/Region of Manufacture | United States | ||
| Country of Manufacture | United States | ||
| Brand | Starrett | ||
| MOORE JIG GRIND OPERATOR | 54C 6" HOLD-DOWNS | ||
| Model | 54C |
Directions
Similar products from Supporting Blocks & Sets
PR. BROWN & SHARP 0-V-BLOCKS-#749 AND 1 SINGLE V-BLOCK S/ STARRETT
10 Pc Precision Angle Block Set 1 to 5 Degree & 5 to 30 degree Blocks
Machinist V-block w/ Clamp, Side Brackets, Heavy Duty
MACHINIST LATHE MILL 2 Magnetic Transfer Parallel Blocks for Grinding n
Starrett Offset #567 "V" Block With Clamp
VINTAGE MACHINIST BLOCK DATED 1921
Norton surface grinder wheel norbide dressing stick
MAGNETIC CHUCK V BLOCKS AND PARALLEL BLOCKS 3 STARRETT PARALLELS For Grinder
Hardened Tool maker Block work holding
Starrett V Vee Block No. 568 w/ Clamp
Magnetic Transfer Blocks for Surface Grinder
NEW PAIR V BLOCKS / CLAMPS STARRETT 278 machinist tool tools grinding milling
MACHINE SHOP MADE V BLOCK & CLAMP SET PRECISION
Fisher Machine Magnetic Chuck Parallels - One Pair Integrally Cast
2-1/2" V Bubble Level for Machining Work. Free USA Shipping!
Machinist 1-2-3 Blocks And Parallels (One Set Of Each Matching Size's)
People who viewed this item also vieved
HARDINGE 49/64" MODEL 215 COLLET MORE COLLETS & TOOLING LISTED LOT C11988
CUSHMAN USA 3/8" MODEL 215 COLLET MORE COLLETS & TOOLING LISTED LOT C11987
HARDINGE C24-D FIXTURE BACK PLATE
MACHINIST TOOL LATHE MILL Tool Makers Ground Angle Block Fixture
4 Machinist Parallels / harden & ground/ 3/8X1 1/4" X 5 1/2" & .350 x1 7/16"x 7
1 – Good-Hand GH-36224 Push-Pull Clamp, NEW in Plastic, FREE SHIPPING
3x Williams CC-406 Deep Throat Clamp
Lot of Eleven DE-STA-CO Toggle Clamps Assorted Sizes and Types
8" 3 JAW (2 SETS) HARD SEMI-STEEL PLAIN BACK SCROLL MANUAL LATHE CHUCK "NEW"
ONCA SMW AUTOBLOCK 9" Pneumatic Air Power Chuck D1-8
Vintage Montgomery Ward Powr Kraft Bench Vise Swivel Base 84-5432 Cast Iron20lbs
RIDGID BC-410 BENCH CHAIN VISE
3" Charles Parker Bench Vise #973 3" Jaws Swivel Base Antique Vintage Original
ROYAL ROYAL Dead Center Half Carbide-Tipped POINT DIAMETER: 1.231''
ROYAL Oversized Carbide Point Dead Center - TAPER: 4 MT
ROYAL ROYAL Dead Center Half Carbide-Tipped POINT DIAMETER: 0.938''
J H WILLIAMS 2020S CUT OFF TOOL HOLDER w/ BLADE Lathe Atlas South Bend Craftsman
Societe Genevoise Rotary Table Needs cleaned Tilting Rotary table
110mm Rotary table Horizontal & Vertical With Dividing Plate set & Tailstock
Adjustable Tailstock for Rotary Table 8 "
Jacobs rubber flex collet chuck Model 50 LO taper spindle mount
Erickson CV40ER16500 Single Angle Collet Chuck 1025700
Erickson 1258159 BT40DA188100M 3/64"-3/4" x 3.94" Series DA-180 CNC Collet Chuck
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies