+ Post new Ad
STARRETT WEBBER 63 Pc Square Steel Gage Block Incomplete Set in case, US $85.00 – Picture 0
STARRETT WEBBER 63 Pc Square Steel Gage Block Incomplete Set in case, US $85.00 – Picture 0

Starrett Webber 63 Pc Square Steel Gage Block Incomplete Set In Case

US $85.00

  • Madison Heights, Michigan, United States
  • Jan 30th
Open on mobile:
QR code
STARRETT WEBBER 63 Pc Square Steel Gage Block Incomplete Set in case THIS IS WEBBER BY STARRETT CO. STARRETT WEBBER 63 Pc Square Steel Gage Block. Set in case original case included. all in good condition, some block has small rust spots.   #113214-O14 Please pay promptly after an auction ends, we accept Paypal from a registered and verified account. If you have no intention of paying withing 24 hours please refrain from bidding. All shipments will be packaged and shipped out daily, Monday - Friday between the hours of 10AM Eastern Time and 12PM Eastern. If you purchased your item after the stated hours, then your item will ship the following day between the same time. It is our goal to insure your package arrives safely, as such our packing department spends alot of time carefully packaging items, if an item arrives in less than stellar condition please ship it back BEFORE leaving negative feedback and we will gladly refund your money. Lastly, if you have special requests regarding shipping please dont hesitate to send us a message and we will respond very shortly. All items have a 14 day return period. We are a resale shop dedicated to outstanding customer service. It is our goal to provide quality items at an affordable price and to get those items to you as quickly as possible. If at any time and for any reason we are not representing this creed please feel free to message us and we will undoubtedly make it right, in any way possible. Please feel free to use the Ebay Messaging system to send us any questions, concerns and comments. We pay close attention to these things and will take everything into consideration to create a more successful buying experience.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Starrett

Directions

Similar products from Supporting Blocks & Sets

ALORIS CXA 5 # 3 MOORSE TAPER HOLDER

ALORIS CXA 5 # 3 MOORSE TAPER HOLDER

  • Perrysburg, Ohio, United States
  • Jan 30th
BRUNSWICK PRECISION 12" INSPECTION V BLOCK SINE BLOCK

BRUNSWICK PRECISION 12" INSPECTION V BLOCK SINE BLOCK

  • Rochester, New York, United States
  • Jan 30th
Vintage Light Weight Arm to Hold Items

Vintage Light Weight Arm to Hold Items

  • Cynthiana, Kentucky, United States
  • Jan 30th
Machinist Holding/Grinding Block 2 1/16 X 2 5/8 X 2 5/8

Machinist Holding/Grinding Block 2 1/16 X 2 5/8 X 2 5/8

  • Cynthiana, Kentucky, United States
  • Jan 30th
Brown & Sharpe Magnetic Chuck Transferring V-Blocks - No. 756

Brown & Sharpe Magnetic Chuck Transferring V-Blocks - No. 756

  • Old Hickory, Tennessee, United States
  • Jan 30th
V Block,Taft-Peirce Style No. 9130 Machinist V Block & Clamp & Screws, USA

V Block,Taft-Peirce Style No. 9130 Machinist V Block & Clamp & Screws, USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th
Machinists 12/5D BUY NOW USA Magnetic Transfer Pad for grinding

Machinists 12/5D BUY NOW USA Magnetic Transfer Pad for grinding

  • Lutz, Florida, United States
  • Jan 30th
Machinists 12/5D BUY NOW Buy Now

Machinists 12/5D BUY NOW Buy Now

  • Lutz, Florida, United States
  • Jan 30th
Starrett 278 V-Blocks Pair With Clamps USED

Starrett 278 V-Blocks Pair With Clamps USED

  • Byron, California, United States
  • Jan 30th
81 Pc Rectangular Steel Gage Block from .050 to 4" Set in case

81 Pc Rectangular Steel Gage Block from .050 to 4" Set in case

  • Madison Heights, Michigan, United States
  • Jan 30th
LOT of MACHINIST PARALLELS machinist tools Flat rate shipping

LOT of MACHINIST PARALLELS machinist tools Flat rate shipping

  • Kokomo, Indiana, United States
  • Jan 30th
Lot of 16 Aluminum Setup Step Blocks - 4 Sizes

Lot of 16 Aluminum Setup Step Blocks - 4 Sizes

  • Elk River, Minnesota, United States
  • Jan 30th
Lot of 16 Aluminum Setup Step Blocks - 3 Sizes

Lot of 16 Aluminum Setup Step Blocks - 3 Sizes

  • Elk River, Minnesota, United States
  • Jan 30th
Starrett V-Blocks 278 Pair

Starrett V-Blocks 278 Pair

  • San Luis Obispo, California, United States
  • Jan 30th
Precision Universal Block

Precision Universal Block

  • Brooklyn, New York, United States
  • Jan 30th
PAIR OF MAGNETIC PARALLEL BLOCKS STANDARD POLE TYPE

PAIR OF MAGNETIC PARALLEL BLOCKS STANDARD POLE TYPE

  • Ellington, New York, United States
  • Jan 30th
2 Sets, Jergens 14942 Pointed Soft Jaws, 1.5mm x 60? Serrated, 10" Chuck - #0765

2 Sets, Jergens 14942 Pointed Soft Jaws, 1.5mm x 60? Serrated, 10" Chuck - #0765

  • Dundee, Florida, United States
  • Jan 30th
PAIR OF MAGNETIC PARALLEL BLOCKS STANDARD POLE TYPE USA! 1 X 2 X 3

PAIR OF MAGNETIC PARALLEL BLOCKS STANDARD POLE TYPE USA! 1 X 2 X 3

  • Ellington, New York, United States
  • Jan 30th
HARDENED STEEL SET OF V-BLOCKS 4.13" x 4.13" x 3.13" in Wood Case

HARDENED STEEL SET OF V-BLOCKS 4.13" x 4.13" x 3.13" in Wood Case

  • Sugar Valley, Georgia, United States
  • Jan 30th
Phase II 900-611 Ultra Thin Parallel Set, 20 Pcs, 1/2" to 1-11/16", 1/32" Thick

Phase II 900-611 Ultra Thin Parallel Set, 20 Pcs, 1/2" to 1-11/16", 1/32" Thick

  • Saint Louis, Missouri, United States
  • Jan 30th

People who viewed this item also vieved

ROYAL 10906 Pipe And Bull Head Live Center-Taper:4 MT

ROYAL 10906 Pipe And Bull Head Live Center-Taper:4 MT

  • Duncan, South Carolina, United States
  • Jun 7th
ROYAL 10903 Pipe And Bull Head Live Center-Taper:3 MT

ROYAL 10903 Pipe And Bull Head Live Center-Taper:3 MT

  • Duncan, South Carolina, United States
  • Jun 7th
ROYAL 10904 Pipe And Bull Head Live Center-Taper:4 MT

ROYAL 10904 Pipe And Bull Head Live Center-Taper:4 MT

  • Duncan, South Carolina, United States
  • Jun 7th
VTG. MACHINIST ANGLE BLOCK,SETUP BLOCK , 2 1/4 x 3 3/4 x 3"W

VTG. MACHINIST ANGLE BLOCK,SETUP BLOCK , 2 1/4 x 3 3/4 x 3"W

  • Berlin, Connecticut, United States
  • Jun 7th
VTG. MACHINIST ANGLE BLOCK,SETUP BLOCK , 3 1/4 x 4 5/8 x 4"W

VTG. MACHINIST ANGLE BLOCK,SETUP BLOCK , 3 1/4 x 4 5/8 x 4"W

  • Berlin, Connecticut, United States
  • Jun 7th
YUASA NO 550 004 5C HORIZONTAL VERTICAL 5C COLLET INDEXER

YUASA NO 550 004 5C HORIZONTAL VERTICAL 5C COLLET INDEXER

  • El Monte, California, United States
  • Jun 7th
Hardinge 7/16" # 5C Collet with internal Threads Unit # 5

Hardinge 7/16" # 5C Collet with internal Threads Unit # 5

  • Coventry, Rhode Island, United States
  • Jun 9th
Chatillon DFGS2 Digital Force Gauge 2 LB

Chatillon DFGS2 Digital Force Gauge 2 LB

  • Dana Point, California, United States
  • Jun 9th
Hardinge 7/16" # 5C Collet with internal Threads Unit # 4

Hardinge 7/16" # 5C Collet with internal Threads Unit # 4

  • Coventry, Rhode Island, United States
  • Jun 9th
MACHINIST TOOLS LATHE MILL 2 Kant Twist 6" Clamp s for Set Up Hold Down hj

MACHINIST TOOLS LATHE MILL 2 Kant Twist 6" Clamp s for Set Up Hold Down hj

  • Morris Plains, New Jersey, United States
  • Jun 9th
MACHINIST TOOLS LATHE MILL 2 Kant Twist 6" Clamp s for Set Up Hold Down

MACHINIST TOOLS LATHE MILL 2 Kant Twist 6" Clamp s for Set Up Hold Down

  • Morris Plains, New Jersey, United States
  • Jun 9th
Clamps Lot knuvise p1200..p400..p400

Clamps Lot knuvise p1200..p400..p400

  • Chicago, Illinois, United States
  • Jun 9th
Columbian 4" Bench Vice No 04M2 Swivel 3 Screw Mount Base Anvil

Columbian 4" Bench Vice No 04M2 Swivel 3 Screw Mount Base Anvil

  • Spotswood, New Jersey, United States
  • Jun 9th
machine vise

machine vise

  • Katonah, New York, United States
  • Jun 9th
Drill press XY table

Drill press XY table

  • Katonah, New York, United States
  • Jun 9th
HD Precision 3-Jaw x 8" Self-Centering Metal Lathe Chuck Plain Back M1060 New

HD Precision 3-Jaw x 8" Self-Centering Metal Lathe Chuck Plain Back M1060 New

  • Jacksonville, Florida, United States
  • Jun 9th
Lathe Chuck 4 Jaw Reversible 6" UNION 5553 w/ Back Mounting Plate 7/8-14 USA

Lathe Chuck 4 Jaw Reversible 6" UNION 5553 w/ Back Mounting Plate 7/8-14 USA

  • Palm Harbor, Florida, United States
  • Jun 9th
Kitagawa power chuck

Kitagawa power chuck

  • Milan, Indiana, United States
  • Jun 9th
Collet Closer; Lever Type; 5C; Victor 16" Lathe (CTAM #474)

Collet Closer; Lever Type; 5C; Victor 16" Lathe (CTAM #474)

  • Sicklerville, New Jersey, United States
  • Oct 27th
KENNAMETAL DA200 COLLET CHUCK EXTENSION 3/4" SHANK 11-3/4" OAL STK12275Z

KENNAMETAL DA200 COLLET CHUCK EXTENSION 3/4" SHANK 11-3/4" OAL STK12275Z

  • Wadley, Alabama, United States
  • Oct 27th
** Lyndex 800-040 5/8" R-8 Collet New - Still in the Box! **

** Lyndex 800-040 5/8" R-8 Collet New - Still in the Box! **

  • Garden City, Idaho, United States
  • Oct 27th
PALMGREN X-Y Table, 9636103 Dual Cross Slide Table, 6 x 10 In, Used

PALMGREN X-Y Table, 9636103 Dual Cross Slide Table, 6 x 10 In, Used

  • Tucson, Arizona, United States
  • Nov 12th
Scharminn 3.00 horizontal boring mill model WB75 sn 7080 37-39 rotary table

Scharminn 3.00 horizontal boring mill model WB75 sn 7080 37-39 rotary table

  • Warminster, Pennsylvania, United States
  • Nov 12th
USED PRECISION COMPOUND MILLING TABLE

USED PRECISION COMPOUND MILLING TABLE

  • Goose Creek, South Carolina, United States
  • Nov 12th
MACHINIST TOOLS LATHE MILL Machinist Vintage Reed Pipe Die Set in Original Box

MACHINIST TOOLS LATHE MILL Machinist Vintage Reed Pipe Die Set in Original Box

  • Morris Plains, New Jersey, United States
  • Nov 26th
Craftsman No. 2194 LH Metal Lathe Turning Tool Holder Takes 1/4" Bits South Bend

Craftsman No. 2194 LH Metal Lathe Turning Tool Holder Takes 1/4" Bits South Bend

  • Shrewsbury, Massachusetts, United States
  • Nov 27th
Lot of NIELSEN TOOL & DIE TRANSFER SCREWS ALL METAL SETS

Lot of NIELSEN TOOL & DIE TRANSFER SCREWS ALL METAL SETS

  • South El Monte, California, United States
  • Nov 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies