+ Post new Ad
State Spindle Oscillating Sander, US $2,300.00 – Picture 0
State Spindle Oscillating Sander, US $2,300.00 – Picture 1
State Spindle Oscillating Sander, US $2,300.00 – Picture 2
State Spindle Oscillating Sander, US $2,300.00 – Picture 3
State Spindle Oscillating Sander, US $2,300.00 – Picture 4
State Spindle Oscillating Sander, US $2,300.00 – Picture 5
State Spindle Oscillating Sander, US $2,300.00 – Picture 6
State Spindle Oscillating Sander, US $2,300.00 – Picture 7
State Spindle Oscillating Sander, US $2,300.00 – Picture 8
State Spindle Oscillating Sander, US $2,300.00 – Picture 9
State Spindle Oscillating Sander, US $2,300.00 – Picture 10
State Spindle Oscillating Sander, US $2,300.00 – Picture 0
State Spindle Oscillating Sander, US $2,300.00 – Picture 1
State Spindle Oscillating Sander, US $2,300.00 – Picture 2
State Spindle Oscillating Sander, US $2,300.00 – Picture 3
State Spindle Oscillating Sander, US $2,300.00 – Picture 4
State Spindle Oscillating Sander, US $2,300.00 – Picture 5
State Spindle Oscillating Sander, US $2,300.00 – Picture 6
State Spindle Oscillating Sander, US $2,300.00 – Picture 7
State Spindle Oscillating Sander, US $2,300.00 – Picture 8
State Spindle Oscillating Sander, US $2,300.00 – Picture 9
State Spindle Oscillating Sander, US $2,300.00 – Picture 10

State Spindle Oscillating Sander

US $2,300.00

  • Pleasanton, California, United States
  • Jan 30th
Open on mobile:
QR code
State Spindle Oscillating drum sander 1 horsepower for commercial or industrial use. Three Phase Power. Has exchangable spindles that attach via taper and unit comes with four extra spindles. Large table. Spindle can be tilted. Has usefull attached light. I believe it to by a t-5 model, but see pictures for details. 
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand State

Directions

Similar products from Professional Sander Machines

Jet 575924 1 1/2" X 5 1/2" Aluminum Oxide Sanding Sleeve, 150 grit, 4-pack

Jet 575924 1 1/2" X 5 1/2" Aluminum Oxide Sanding Sleeve, 150 grit, 4-pack

  • Macon, Georgia, United States
  • Jan 30th
KALAMAZOO SANDER #S612-1, 6" x 48" BELT / 12" DISC SANDER- NEW!

KALAMAZOO SANDER #S612-1, 6" x 48" BELT / 12" DISC SANDER- NEW!

  • Baltimore, Maryland, United States
  • Jan 30th
6 NEW SIA SANDING BELTS 7-1/2" X 57" 100 GRIT ALUMINUM OXIDE - SWITZERLAND - NEW

6 NEW SIA SANDING BELTS 7-1/2" X 57" 100 GRIT ALUMINUM OXIDE - SWITZERLAND - NEW

  • Seattle, Washington, United States
  • Jan 30th
Felder BF4-41 combination jointer planer table saw shaper mortiser

Felder BF4-41 combination jointer planer table saw shaper mortiser

  • DeKalb, Illinois, United States
  • Jan 30th
Timesavers denibbing rotary brush sander widebelt finishing fladder sanding

Timesavers denibbing rotary brush sander widebelt finishing fladder sanding

  • DeKalb, Illinois, United States
  • Jan 30th
Ekstrom Carlson Ecco Model 18 Sander / Buffer

Ekstrom Carlson Ecco Model 18 Sander / Buffer

  • Hughesville, PA, United States
  • Jan 30th
EAGLE 6900-5 5", RANDOM ORBITAL HAND SANDER

EAGLE 6900-5 5", RANDOM ORBITAL HAND SANDER

  • Belmont, North Carolina, United States
  • Jan 30th
CEMCO 2000 42 INCH ORBITAL HEAD WIDE BELT SANDER

CEMCO 2000 42 INCH ORBITAL HEAD WIDE BELT SANDER

  • Fountain Valley, California, United States
  • Jan 30th
Grizzley Industrial Belt Sander 110/220 V with Extra Sanding Belts

Grizzley Industrial Belt Sander 110/220 V with Extra Sanding Belts

  • Brunswick, Ohio, United States
  • Jan 30th
SHOPSMITH PUSH BLOCK, 3-1/2" X 7-3/4"

SHOPSMITH PUSH BLOCK, 3-1/2" X 7-3/4"

  • Bremen, Indiana, United States
  • Jan 30th
Fein MultiMaster Start Multi-Purpose Power Sanding and Scraping/Cutting Tool

Fein MultiMaster Start Multi-Purpose Power Sanding and Scraping/Cutting Tool

  • New Britain, Connecticut, United States
  • Jan 30th
Dynabrade Model # 40610 Electric Dynafile II

Dynabrade Model # 40610 Electric Dynafile II

  • Flushing, New York, United States
  • Jan 30th
TTC Hand Tapper - Model : 265-110 Tap Capacity: #0-5/8" Throat Depth: 7-1/2"

TTC Hand Tapper - Model : 265-110 Tap Capacity: #0-5/8" Throat Depth: 7-1/2"

  • Flushing, New York, United States
  • Jan 30th
Oakley Model H-648 Type B-6 Edge Sander

Oakley Model H-648 Type B-6 Edge Sander

  • United States
  • Jan 30th
Oliver 6310 6" x 108" Oscillating Edge Sander

Oliver 6310 6" x 108" Oscillating Edge Sander

  • Kent, Washington, United States
  • Jan 30th
Buehler Duomet Belt Sander

Buehler Duomet Belt Sander

  • New Britain, Connecticut, United States
  • Jan 30th
Timesavers Vision 52" 3 Head Sander - 2 Orbital Heads w/Rotary Brush 7331-05-338

Timesavers Vision 52" 3 Head Sander - 2 Orbital Heads w/Rotary Brush 7331-05-338

  • Seattle, Washington, United States
  • Jan 30th
4 inch by 74 inch 40 grit sandpaper belt, quantity 11, lot C2222

4 inch by 74 inch 40 grit sandpaper belt, quantity 11, lot C2222

  • Little Falls, Minnesota, United States
  • Jan 30th
TTC 1" x 30" Belt & 5" Disc Sander - Model : T3012

TTC 1" x 30" Belt & 5" Disc Sander - Model : T3012

  • Flushing, New York, United States
  • Jan 30th
36" AEM/WEBER DRY-TYPE ABRASIVE BELT GRINDER - #26463

36" AEM/WEBER DRY-TYPE ABRASIVE BELT GRINDER - #26463

  • Cincinnati, Ohio, United States
  • Jan 30th

People who viewed this item also vieved

foley belsaw retoother

foley belsaw retoother

  • Waukesha, Wisconsin, United States
  • Jun 15th
Vintage Delta Tenoning Jig *Excellent Condition*

Vintage Delta Tenoning Jig *Excellent Condition*

  • Holly, Michigan, United States
  • Jun 15th
Delta Radial Arm Saw

Delta Radial Arm Saw

  • Scottsburg, Indiana, United States
  • Jun 16th
ROCKWELL / DELTA 15" DRILL PRESS PART 15- SERIES DELTA DEPTH CONTROL ROD

ROCKWELL / DELTA 15" DRILL PRESS PART 15- SERIES DELTA DEPTH CONTROL ROD

  • Oceanport, New Jersey, United States
  • May 28th
ROCKWELL / DELTA 15" DRILL PRESS PART 15- SERIES DELTA QUILL

ROCKWELL / DELTA 15" DRILL PRESS PART 15- SERIES DELTA QUILL

  • Oceanport, New Jersey, United States
  • May 28th
DRILL BITS AUGER BIT HAND DRILL BIT

DRILL BITS AUGER BIT HAND DRILL BIT

  • Oceanport, New Jersey, United States
  • May 28th
CNC Router Plans ,3 Axis working area 65x45x15cm , 65x65x15cm , 65x85x15cm (XYZ)

CNC Router Plans ,3 Axis working area 65x45x15cm , 65x65x15cm , 65x85x15cm (XYZ)

  • Bangkok, Thailand
  • Jun 8th
Thermwood CNC Router

Thermwood CNC Router

  • Vaudreuil-Dorion, Quebec, Canada
  • Jun 8th
DXF and EPS File For CNC Plasma, Laser Cut or CNC Router MEGA LOT 330 FILES

DXF and EPS File For CNC Plasma, Laser Cut or CNC Router MEGA LOT 330 FILES

  • Cuenca, Azuay, Ecuador
  • Jun 8th
NEW INTERCHANGEABLE 1" Spindle Assembly Shaper

NEW INTERCHANGEABLE 1" Spindle Assembly Shaper

  • Alpharetta, Georgia, United States
  • Jun 9th
PF100 EDGETECH MANUAL POSTFORMER -

PF100 EDGETECH MANUAL POSTFORMER -

  • Centralia, Washington, United States
  • Jun 9th
Bacci Model TSDF Double Sided Round End Tenoner

Bacci Model TSDF Double Sided Round End Tenoner

  • Hughesville, PA, United States
  • Jun 9th
South Bend 9 Metal Lathe CounterShaft Motor Mount Casting (#1806)

South Bend 9 Metal Lathe CounterShaft Motor Mount Casting (#1806)

  • Ivoryton, Connecticut, United States
  • Jun 9th
Craftsman - Atlas 6" metal lathe - Countershaft Aseembly - Model no. 101.07301

Craftsman - Atlas 6" metal lathe - Countershaft Aseembly - Model no. 101.07301

  • Kimberly, Wisconsin, United States
  • Jun 9th
Bridgeport EZ-Path CNC Lathe 16" Swing x 40" Btwn Centers w/ Original Controls

Bridgeport EZ-Path CNC Lathe 16" Swing x 40" Btwn Centers w/ Original Controls

  • San Leandro, California, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies