US $24.00
| Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Cutting edge angle | 90 deg |
| Primary Application(s) | Cartridge for turning | ||
| Maximum Overhang | 32mm | ||
| Insert Style and Size Code | 7 T i.e.TCMT 1.8(1.5)1 | ||
| Brand | Sandvik | ||
| Shank Width | 8mm | ||
| Functional Width | 10mm | ||
| Cutting Direction | Right | ||
| Model | CoroTurnA® 107 | ||
| Manufacturer | SANDVIK | ||
| Country/Region of Manufacture | Sweden | ||
| Overall Length | 32mm | ||
| MPN | 10460251 | ||
| Quantity per lot | 1 |
Directions
Similar products from Drilling Heads & Tool Holders
1/2"x7" RH SCLCR Index Boring Bar w/ 10 Pcs CCMT Carbide Inserts, #P252-S403INS
Aircraft Tools (Lot of 10) 1/4" Carbide TiN Coated Boring Threading Bar AV565
SUPER PRECISION MICROFLEX BORING HEAD, 5/8" SHANK FOR HARDINGE LATHER OR MILL
WMW Boring & Facing Head MT5 (Morse Taper 5) with accessories (DDR Ausdrehkopf)
Sumitomo carbide insert tool holder BSTJOR 082
Sandvik CoroCut Square Shark Holder RF 123G040-16B
10Pcs 11 IR A60 Insert With SIR/SNR 12x150mm Lathe Inner Threading Boring Bar
NEW SANDVIK 435-120211 R49 internal grooving tool holder 435120211R49 REV A
MVTNR 12 3B 25.4mm SANDVIK Boring Bar (1pc) New
SVVBN 12 3B 10.04mm SANDVIK Boring Bar (1pc) New
CRITERION BORING HEAD S-1 1/2, 1/2 inch Straight Shank
LETTER L HSS CHUCKING REAMER USA MADE .290 DIAMETER MORSE METALWORKING TOOLING
NEW LETTER L HSS CHUCKING REAMER USA MADE .290 DIAMETER MORSE METALWORKING TOOL
USED BEAVER QUICK CHANGE BORING BAR TOOL BIT HOLDER FOR 1/2" BITS (2" SHANK)
Kennametal KSDN 866C Turning Tool Holder - 1-1/2" x 1' Shank- show original title
MAZAK V-TYPE MILLING CHUCK HOLDER MF4149
SANDVIK COROMANT A20T-SCLCR 4 Internal Boring Bar. 1.250" diameter.
1Pc 12x150mm SCLCR Boring Bar With 3Pcs 12mm Turning Tool Holder For CCMT 09T3
People who viewed this item also vieved
BT 40 TOOL HOLDER - #2 MT - 2 & 1/4" GAGE - 981F
HSK 100 Taper x 7/8" Bore End Mill Holder
NEW MARTIN SK 1-1/2 QD BUSHING 1-1/2 IN BORE D435532
NEW MARTIN SF1 11/16 QD BUSHING 1-11/16 IN BORE D435523
BILZ #2 TENSION COMPRESSION TAP CHUCK W/ CAT 40 ADAPTER STOCK #A9
Valenite Retention Knob / Pull Stud, Coolant Thru, # PT-450, Used, WARRANTY
Snap On Retainer Chuck, PH200D
JACOBS No. 1A 0-1`/4" CHUCK 1/2' No. 1 Jacobs Shank with KEY
Sandvik 1.0" Square Shank Turning Tool CoroTurn RC DSKNR 16 4D
WIDIA Cut Tool Holder 3/4" X 3/4" Seat 5 WMTSR125056 250133 <038>
Carboloy Quick Change Tap Chuck Collet Bilz 2 QCTC-1375-0203 w/thru hole (29)
Carboloy Quick Change Tap Chuck Collet Bilz 2 QCTC-1250-0203 w/thru hole (28)
ISCAR COOLANT-FED INDEXABLE HEAD DRILL 7/8" DIA. SHANK (WITH INSERT) LOT C11278
ISCAR COOLANT-FED INDEXABLE HEAD DRILL (WITH INSERT) LOT C11282
Index Live Tooling XL90650.0100
High Quality Tools Model 2000 Right Angle Head
3/8" M23 Bell Style Mandrel Cut Of Wheel Holder Air Dye Grinder USA SHIPPING
Balancing Arbor / Mandrel Taper is 1-9/16 to 2-1/2 x 3-1/4 - 8" OAL
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies