+ Post new Ad
Streetwize Curved Wipers With 7 Adaptors 20", US $16.99 – Picture 0
Streetwize Curved Wipers With 7 Adaptors 20", US $16.99 – Picture 0

Streetwize Curved Wipers With 7 Adaptors 20"

US $16.99

  • Chesterfield, United Kingdom
  • Jul 30th
Open on mobile:
QR code
20" Natural Soft Rubber Performance Wiper Blade|Lastest curved design with precision tensioned dual steel spring for uniform pressure along the blade|Aero-dynamic design to reduce wind lift at speed (tested to over 100 mph|Precision cut wiping edge for maximum clearance of water from the windscreen|Extremely long lasting blades resistant to heat and cold|Universal adaptor fitting kits supplied with each wiper blade pack 20" Natural Soft Rubber Performance Wiper Blade|Lastest curved design with precision tensioned dual steel spring for uniform pressure along the blade|Aero-dynamic design to reduce wind lift at speed (tested to over 100 mph|Precision cut wiping edge for maximum clearance of water from the windscreen|Extremely long lasting blades resistant to heat and cold|Universal adaptor fitting kits supplied with each wiper blade pack
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Streetwize
MPN SWWB20
EAN 5026637618710

Directions

Similar products from Rotating Tables

Precision Rotary Table 6" 150mm 3 slots Heavy duty Milling Horizontal Vertical

Precision Rotary Table 6" 150mm 3 slots Heavy duty Milling Horizontal Vertical

  • GURGAON, HARYANA, India
  • Jul 31st
Precision Rotary Table 4" / 100mm Horizontal & Vertical 4 Slots Best Quality

Precision Rotary Table 4" / 100mm Horizontal & Vertical 4 Slots Best Quality

  • GURGAON, HARYANA, India
  • Jul 31st
Rotary Table 3" 80mm Horizontal Vertical + 65mm 3 jaw self centering chuck Atoz

Rotary Table 3" 80mm Horizontal Vertical + 65mm 3 jaw self centering chuck Atoz

  • GURGAON, HARYANA, India
  • Jul 31st
Rotary Table 3" 80mm HV + 65mm 3 jaw self centering chuck + Round Vice 80mm Atoz

Rotary Table 3" 80mm HV + 65mm 3 jaw self centering chuck + Round Vice 80mm Atoz

  • GURGAON, HARYANA, India
  • Jul 31st
Rotary Table 4" / 100mm Horizontal and vertical model + 80MM ROUND VICE ATOZ

Rotary Table 4" / 100mm Horizontal and vertical model + 80MM ROUND VICE ATOZ

  • GURGAON, HARYANA, India
  • Jul 31st
Rotary Table 4" / 100mm HV Model + 65mm self centering lathe chuck + PLATE ATOZ

Rotary Table 4" / 100mm HV Model + 65mm self centering lathe chuck + PLATE ATOZ

  • GURGAON, HARYANA, India
  • Jul 31st
Center Square 1.5 and 3 Inch Hardened and tempered blade with Round Bar 3/8 Inch

Center Square 1.5 and 3 Inch Hardened and tempered blade with Round Bar 3/8 Inch

  • DELHI, DELHI, India
  • Jul 31st
DAYTON 2LKU7 Milling Machine Compound Milling Table

DAYTON 2LKU7 Milling Machine Compound Milling Table

  • Minooka, Illinois, United States
  • Jul 31st
Hardinge lathe cut off attachment parts only

Hardinge lathe cut off attachment parts only

  • Cromwell, Connecticut, United States
  • Jul 31st
QUICK CHANGE TOOL HOLDER FMS

QUICK CHANGE TOOL HOLDER FMS

  • Cromwell, Connecticut, United States
  • Jul 31st
4th Axis Hollow Shaft CNC Router Rotational A Axis 100MM 4 Jaw Chuck Engraving

4th Axis Hollow Shaft CNC Router Rotational A Axis 100MM 4 Jaw Chuck Engraving

  • China, China
  • Jul 30th
New Palmgren 12" X 6" SINGLE AXIS SLIDE TABLE Mill , Drill Press or Inspection

New Palmgren 12" X 6" SINGLE AXIS SLIDE TABLE Mill , Drill Press or Inspection

  • Perth, Ontario, Canada
  • Jul 30th
M6 CLAMPING KIT SET FOR ROTARY TABLE 3" & 4"

M6 CLAMPING KIT SET FOR ROTARY TABLE 3" & 4"

  • Delhi, DELHI, India
  • Jul 30th
M8 CLAMPING KIT SET FOR ROTARY TABLE 3" & 4"

M8 CLAMPING KIT SET FOR ROTARY TABLE 3" & 4"

  • Delhi, DELHI, India
  • Jul 30th
HAAS CSMD Control Simulator Mill

HAAS CSMD Control Simulator Mill

  • Fishersville, Virginia, United States
  • Jul 30th
Sajo Heavy Duty Dividing & Tailstock (CTAM #7787)

Sajo Heavy Duty Dividing & Tailstock (CTAM #7787)

  • Sicklerville, New Jersey, United States
  • Jul 30th
Rotary Table 4" Inch/100 mm 3 Slot H-V MT2 Bore + MT2 Arbour + 70mm 4 jaw chuck

Rotary Table 4" Inch/100 mm 3 Slot H-V MT2 Bore + MT2 Arbour + 70mm 4 jaw chuck

  • GURGAON, HARYANA, India
  • Jul 29th
3" rotary table 3 slot and 80mm lathe chuck with reversible jaws

3" rotary table 3 slot and 80mm lathe chuck with reversible jaws

  • GURGAON, HARYANA, India
  • Jul 29th
Rotary Table 4" / 100mm HV + 65mm self centering lathe chuck + 80MM ROUND VICE

Rotary Table 4" / 100mm HV + 65mm self centering lathe chuck + 80MM ROUND VICE

  • GURGAON, HARYANA, India
  • Jul 29th
3 Slots Rotary Table 4" / 100mm Tilting Model + 80mm Round Vice Atoz

3 Slots Rotary Table 4" / 100mm Tilting Model + 80mm Round Vice Atoz

  • GURGAON, HARYANA, India
  • Jul 29th

People who viewed this item also vieved

MAGNETIC V BLOCK - VEE BLOCK 4" x 3" x 3.3/4" 90 Deg. V-Angle - HARDENED

MAGNETIC V BLOCK - VEE BLOCK 4" x 3" x 3.3/4" 90 Deg. V-Angle - HARDENED

  • DELHI, DELHI, India
  • Jan 30th
1.1/2" CAPACITY PRECISION STEEL V-BLOCK PAIR W. CLAMPS 1-1/4x1-1/4x1-5/8 - VEE

1.1/2" CAPACITY PRECISION STEEL V-BLOCK PAIR W. CLAMPS 1-1/4x1-1/4x1-5/8 - VEE

  • DELHI, DELHI, India
  • Jan 30th
Magnetic Transfer V-Block BRASS w/ STEEL Pins 2 V's Toolmaker FREE SHIPPING

Magnetic Transfer V-Block BRASS w/ STEEL Pins 2 V's Toolmaker FREE SHIPPING

  • Cranford, New Jersey, United States
  • Jan 30th
Royal Heavy Duty Spindle Type Live Center 3MT 10103 #3 Morse Taper

Royal Heavy Duty Spindle Type Live Center 3MT 10103 #3 Morse Taper

  • San Diego, California, United States
  • Jan 30th
RITEN 17236, Concentric Interchangeable Live Center, 16J, Jarno Taper, USA,/LJ1/

RITEN 17236, Concentric Interchangeable Live Center, 16J, Jarno Taper, USA,/LJ1/

  • Saint Peters, Missouri, United States
  • Jan 30th
SUPER Precision Bison MT#3 Live Center No.7-565-103

SUPER Precision Bison MT#3 Live Center No.7-565-103

  • Columbus, Ohio, United States
  • Jan 30th
UNION 5" 3 Jaw Self-Centering Chuck Loc: E 4

UNION 5" 3 Jaw Self-Centering Chuck Loc: E 4

  • Oregon, Ohio, United States
  • Jan 30th
BUCK Chuck 5" 3 Jaw Self Centering #431

BUCK Chuck 5" 3 Jaw Self Centering #431

  • Oregon, Ohio, United States
  • Jan 30th
C25-ER16 100L Straight shank ER16 Collet Chuck CNC Milling Lathe tools new

C25-ER16 100L Straight shank ER16 Collet Chuck CNC Milling Lathe tools new

  • hongkong, Hong Kong
  • Jan 30th
C CLAMP WILTON -406

C CLAMP WILTON -406

  • Sedona, Arizona, United States
  • Jan 30th
C CLAMP - 4" No.44, CINCINNATI,OH. HARGRAVE.

C CLAMP - 4" No.44, CINCINNATI,OH. HARGRAVE.

  • Sedona, Arizona, United States
  • Jan 30th
C CLAMP WILTON -408 DEEP THROAT.

C CLAMP WILTON -408 DEEP THROAT.

  • Sedona, Arizona, United States
  • Jan 30th
USED HARDINGE 3" 5C STEP CHUCK

USED HARDINGE 3" 5C STEP CHUCK

  • San Bernardino, California, United States
  • Jan 30th
KENNAMETAL TG100 COLLET CHUCK EXTENSIONS SS150TG100925 0460CF6

KENNAMETAL TG100 COLLET CHUCK EXTENSIONS SS150TG100925 0460CF6

  • Wadley, Alabama, United States
  • Jan 30th
VALENITE BT30 ER32 COLLET CHUCK

VALENITE BT30 ER32 COLLET CHUCK

  • Wadley, Alabama, United States
  • Jan 30th
T&O Individual ER-40 Spring Collet - Series: ER40 Size: 1/4" - 17/64"

T&O Individual ER-40 Spring Collet - Series: ER40 Size: 1/4" - 17/64"

  • Flushing, New York, United States
  • Jan 30th
JACOBS RUBBER FLEX COLLETS, J420 .176" - .320 AND J421 .139" - .257"

JACOBS RUBBER FLEX COLLETS, J420 .176" - .320 AND J421 .139" - .257"

  • Hopkins, Minnesota, United States
  • Jan 30th
CNC SWISS EXPANDABLE S&M #42 DOUBLE CONE GUIDE BUSHING

CNC SWISS EXPANDABLE S&M #42 DOUBLE CONE GUIDE BUSHING

  • Baldwin Park, California, United States
  • Jan 30th
Self - Ejecting Lathe Chuck Keys KEY - 9/16" WRENCH TOOL T-HANDLE

Self - Ejecting Lathe Chuck Keys KEY - 9/16" WRENCH TOOL T-HANDLE

  • Lapeer, Michigan, United States
  • Jan 30th
Eclipse No. 934 Magnetic V Block, 2-3/4"W x 3-3/4"L x 4"H Sheffield, England

Eclipse No. 934 Magnetic V Block, 2-3/4"W x 3-3/4"L x 4"H Sheffield, England

  • Saunderstown, Rhode Island, United States
  • Jan 30th
Pair of Angle Plates 14"x66", 3-3/4" Thickness, (3) Vertical T-Slots (25822)

Pair of Angle Plates 14"x66", 3-3/4" Thickness, (3) Vertical T-Slots (25822)

  • Cincinnati, Ohio, United States
  • Jan 30th
Lot of Flat Face Spring Stops Reid Jergens Carr Lane De Sta Co

Lot of Flat Face Spring Stops Reid Jergens Carr Lane De Sta Co

  • Unionville, Pennsylvania, United States
  • Jan 30th
Earth-Chain Lifting Magnet ELM-300 Capacity: 660 lbs (300 kgf)

Earth-Chain Lifting Magnet ELM-300 Capacity: 660 lbs (300 kgf)

  • Chesapeake, Virginia, United States
  • Jan 30th
HITACHI MAGNETIC CHUCK - 10" x 30" SEMI-FINE TO FINE POLE

HITACHI MAGNETIC CHUCK - 10" x 30" SEMI-FINE TO FINE POLE

  • Wellington, Ohio, United States
  • Jan 30th
Vintage Reed Pipe Vise No.1 - 1/8" thru 3 1/2" Pipe Works well

Vintage Reed Pipe Vise No.1 - 1/8" thru 3 1/2" Pipe Works well

  • Fresno, California, United States
  • Jan 30th
Vintage Cobra - 4 Heavy Duty Swivel Bench Vise Great working condition.

Vintage Cobra - 4 Heavy Duty Swivel Bench Vise Great working condition.

  • Yucaipa, California, United States
  • Jan 30th
Kurt 3600V Vise Base

Kurt 3600V Vise Base

  • Oxnard, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies