+ Post new Ad
Stroke Sander 82" X 40" table 6" x 300" belt, US $5900 – Picture 0
Stroke Sander 82" X 40" table 6" x 300" belt, US $5900 – Picture 0

Stroke Sander 82" X 40" Table 6" X 300" Belt

US $5900

  • Malone, New York, United States
  • Oct 24th
Open on mobile:
QR code
Stroke Sander - table is 82"x 40" wide, table is set up to roll 30"in & out under belt(by changing table wheels location you could use full table 40", vertical height adjustment for thickness 0" to 26". Belt size is 6" x 300".  The floor space needed 15' x 6'.  There is a hand platen and a mechanical platen with adjustable down pressure (this can be setup and used as a thickness sander). The beauty about the stroke sander is that you can take rough saw lumber and smooth it to a fine smooth finish, no hand sanding, by changing belt grits. Unlike a roller type thickness sander which leaves a fine ripple which need additional hand sanding, the stroke sander  sanded wood goes straight to the finish room.  Also the following belts included, 3 used 80,120 & 150 grit. Also 7 new 80 grit open and closed coat.  Please note this machine needs to be bolted  firmly to the floor, both arms on each end of the table are welded from being broken. I believe a previous owner did not have the machine anchored to the floor and set a heavy object on the table or just tip over the machine breaking both arms almost in same spot. The repair was very well done (see pics). The particle board has two chips on the edge, this does not affect the operation (see pics). Machine runs good, up & down travel works good but takes time to hand crank, table moves freely in & out, the traveling machine platen moves freely.  The 6" metal pipe & dust blower also comes with machine. Motor is 5 HP 220 volts ac and the dust blower turns on when you start the main motor.   I can help you take the machine apart, and load it on trailer with engine hoist and tractor.  I hauled it on 5'x8' trailer w/3500 lbs. axle, it does have some weight 2000 lbs.  + - ?   Terms of sale - the machine can be demonstrated before it is dismantle. Once you start to dismantle machine its yours, sold as is, no returns. It has to be taken apart.  Local pickup only. Ask questions if you need more info.

Directions

Similar products from Professional Sander Machines

37" Pro Sand Dual Drum Sander 7-1/2HP 3PH

37" Pro Sand Dual Drum Sander 7-1/2HP 3PH

  • Las Vegas, Nevada, United States
  • Oct 25th
Rodgers 8" Edge Sander 5HP

Rodgers 8" Edge Sander 5HP

  • Las Vegas, Nevada, United States
  • Oct 25th
Nice Vintage Black & Decker 3" x 24" Deluxe Belt Sander No.7451 With Dust Bag

Nice Vintage Black & Decker 3" x 24" Deluxe Belt Sander No.7451 With Dust Bag

  • Edison, New Jersey, United States
  • Oct 25th
DYNABRADE 13450 DYNISHER PNEUMATIC AIR FINISHING TOOL SANDER POLISHER LOOK

DYNABRADE 13450 DYNISHER PNEUMATIC AIR FINISHING TOOL SANDER POLISHER LOOK

  • Canoga Park, California, United States
  • Oct 25th
Progress P-4-60 Ballon Belt Sander 2HP

Progress P-4-60 Ballon Belt Sander 2HP

  • Langley, British Columbia, Canada
  • Oct 25th
Opti-Sand Rotary Brush Sander (Model R40V)

Opti-Sand Rotary Brush Sander (Model R40V)

  • Gray, Kentucky, United States
  • Oct 24th
52" wide belt sander

52" wide belt sander

  • Goshen, Indiana, United States
  • Oct 24th
ROCKWELL SHOP SERIES BELT SANDER RC4355K 6 AMP 3" X 21" WITH CASE & MANUAL

ROCKWELL SHOP SERIES BELT SANDER RC4355K 6 AMP 3" X 21" WITH CASE & MANUAL

  • Alsip, Illinois, United States
  • Oct 24th
Mirka MPADBU-7 - 7" Diameter Grip Faced Backup Pad And Buff pad

Mirka MPADBU-7 - 7" Diameter Grip Faced Backup Pad And Buff pad

  • Lindenhurst, New York, United States
  • Oct 24th
Dynabrade 52666 1 hp Straight-Line Die Grinder

Dynabrade 52666 1 hp Straight-Line Die Grinder

  • Shreveport, Louisiana, United States
  • Oct 24th
Mirka Abralon 8A-203-360, 3 in. Foam Grip Disc 360G, Qty. 20

Mirka Abralon 8A-203-360, 3 in. Foam Grip Disc 360G, Qty. 20

  • Tiverton, Rhode Island, United States
  • Oct 24th
35" wide belt sander sanding master/timesaver 18hp 3phase 220v works 5belts new

35" wide belt sander sanding master/timesaver 18hp 3phase 220v works 5belts new

  • Boyceville, Wisconsin, United States
  • Oct 23rd
NATIONAL ORBIT SANDER 8" DC9443

NATIONAL ORBIT SANDER 8" DC9443

  • Roebling, New Jersey, United States
  • Oct 23rd
Dynabrade 59005 5-Inch Non-Vacuum Dynorbital-Spirit Random Orbital Sander, Teal

Dynabrade 59005 5-Inch Non-Vacuum Dynorbital-Spirit Random Orbital Sander, Teal

  • Denver, Colorado, United States
  • Oct 23rd
Dynabrade 59015 3-1/2-Inch Non-Vacuum Dynorbital-Spirit Random Orbital Sander, T

Dynabrade 59015 3-1/2-Inch Non-Vacuum Dynorbital-Spirit Random Orbital Sander, T

  • Denver, Colorado, United States
  • Oct 23rd
Dynabrade 56830 6-Inch Central Vacuum Dynorbital Supreme Random Orbital Sander,

Dynabrade 56830 6-Inch Central Vacuum Dynorbital Supreme Random Orbital Sander,

  • Denver, Colorado, United States
  • Oct 23rd
Dynabrade 59035 5-Inch Non-Vacuum Dynorbital-Spirit Random Orbital Sander, Teal

Dynabrade 59035 5-Inch Non-Vacuum Dynorbital-Spirit Random Orbital Sander, Teal

  • Denver, Colorado, United States
  • Oct 23rd
Dynabrade 56850 5-Inch Non-Vacuum Dynorbital Supreme Random Orbital Sander, Blac

Dynabrade 56850 5-Inch Non-Vacuum Dynorbital Supreme Random Orbital Sander, Blac

  • Denver, Colorado, United States
  • Oct 23rd
Dynabrade 59024 5-Inch Central Vacuum Dynorbital-Spirit Random Orbital Sander, T

Dynabrade 59024 5-Inch Central Vacuum Dynorbital-Spirit Random Orbital Sander, T

  • Denver, Colorado, United States
  • Oct 23rd
Makita GV7000C 7.9-Amp 7 in. Corded Disc Sander

Makita GV7000C 7.9-Amp 7 in. Corded Disc Sander

  • Mishawaka, Indiana, United States
  • Oct 22nd

People who viewed this item also vieved

GENUINE DIACRO MACHINE STAND FITS MANY BENDER,ROLLER,SHEAR,BRAKE DI-ACRO

GENUINE DIACRO MACHINE STAND FITS MANY BENDER,ROLLER,SHEAR,BRAKE DI-ACRO

  • Oceanport, New Jersey, United States
  • Jan 30th
CLAUSING 15" DRILL PRESS MOTOR 3/4 HP 3 PHASE FITS 15 +16 SERIES PRESS

CLAUSING 15" DRILL PRESS MOTOR 3/4 HP 3 PHASE FITS 15 +16 SERIES PRESS

  • Oceanport, New Jersey, United States
  • Jan 30th
3 Spindle Drill Press With (2) Clausing 20" Drill Heads and (1) Powermatic 20" D

3 Spindle Drill Press With (2) Clausing 20" Drill Heads and (1) Powermatic 20" D

  • Archbold, Ohio, United States
  • Jan 30th
Riser Block kit for Delta 14" Bandsaw with hex post interchanges with Delta 894

Riser Block kit for Delta 14" Bandsaw with hex post interchanges with Delta 894

  • Oxford, Pennsylvania, United States
  • Jan 30th
Proxxon 24540 Cobalt Three-Piece Thread-Cutting Set for PD230/E Lathe

Proxxon 24540 Cobalt Three-Piece Thread-Cutting Set for PD230/E Lathe

  • Ferndale, Washington, United States
  • Jan 30th
Proxxon 24620 4PC Milling Cutter Set

Proxxon 24620 4PC Milling Cutter Set

  • Ferndale, Washington, United States
  • Jan 30th
Forward Reversing Switch

Forward Reversing Switch

  • Ogden, Utah, United States
  • Jan 30th
Powematic 26 Shaper 5 Hp

Powematic 26 Shaper 5 Hp

  • Piedmont, South Carolina, United States
  • Jan 30th
ROCKWELL-INVICTA RS-15 RS15 43780 INDUSTRIAL SHAPER ***ONTARIO, CALIF*** *DELTA*

ROCKWELL-INVICTA RS-15 RS15 43780 INDUSTRIAL SHAPER ***ONTARIO, CALIF*** *DELTA*

  • Ontario, California, United States
  • Jan 30th
3 Axis Cam Tech CNC Router Table

3 Axis Cam Tech CNC Router Table

  • Dallas, Texas, United States
  • Jan 30th
mach 3 toolpath Gcode 3d art relief cnc router 1/8 ball nose or 3mm eagle Detail

mach 3 toolpath Gcode 3d art relief cnc router 1/8 ball nose or 3mm eagle Detail

  • Oakton, Virginia, United States
  • Jan 30th
Davis & Wells 5HP Shaper, 1" Arbor, Woodworking

Davis & Wells 5HP Shaper, 1" Arbor, Woodworking

  • Stone Mountain, Georgia, United States
  • Jan 30th
VERY NICE DOALL VERTICAL BANDSAW MODEL 2012-2A W/ 20" THROAT 3 PHASE 230 VOLTS

VERY NICE DOALL VERTICAL BANDSAW MODEL 2012-2A W/ 20" THROAT 3 PHASE 230 VOLTS

  • Rochester, New York, United States
  • Jan 30th
NEW Laguna Tools AB000041 retro-fit for euro-guides bandsaw ceramic blade guide

NEW Laguna Tools AB000041 retro-fit for euro-guides bandsaw ceramic blade guide

  • Johnston, Iowa, United States
  • Jan 30th
Powermatic Model PF-43 1 HP 3-Phase Powerfeeder 4 Speeds 4 Wheels Stock 2192190

Powermatic Model PF-43 1 HP 3-Phase Powerfeeder 4 Speeds 4 Wheels Stock 2192190

  • La Crescenta, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies