Stuart Analog Block Heater For 2 Aluminum Blocks, 130°c Max, W/o Blocks, Sbh130

US $540

  • Medford, New York, United States
  • Jun 12th
Stuart Analog Block Heater for 2 Aluminum Blocks, (Without Block) SBH130 Brand New Item Made in the UK Designed for the precise heating of test-tubes, microcentrifuge tubes, cuvettes and microtitre plates. With simple analogue setting of temperature for ease of use. "Hot" warning light will flash whenever the block temperature is above 50°C. Stuart block heaters are designed to accurately control the temperature of test tubes and other small containers using heated aluminium blocks drilled with holes of the appropriate size for the containers in use. A large variety of blocks with different holes for different sizes and type of container are available. The blocks are fitted into the recess in the top of  the instrument (see figure 1) and heated from below. All blocks are fully interchangeable and blocks for different sizes of container may be used in a block heater at the same time. The large thermal mass of the aluminium blocks allows very accurate and stable temperature control. Perspex safety covers are available as accessories for protection in the event of tubes “spitting”. These also help improve temperature uniformity within the blocks by excluding draughts. Features; Analogue control Economical price 130°C maximum temperature Hot warning light to warn that the blocks are too hot to touch Uniform and stable temperatures Robust construction with simple analogue setting of temperature. The 'Hot' warning light will flash whenever the block temperature is above 50°C and will operate even when the heater is turned off so long as the unit remains connected to the mains. Heats to 100°C in less than 12 minutes. Supplied complete with block extraction tool but without aluminium blocks which must be ordered separately. Specifications; Temperature Range Ambient +8°C to 130°C Temperature stability at 37°C ±0.1°C Uniformity within block at 37°C ±0.1°C Uniformity within block at 130°C ±1°C Dimensions (w x d x h) 235 x 280 x 115mm Net weight (without blocks) 2.1kg Heater power 300W Electrical supply 110V, 60Hz Warranty; Comes with 3 Years Manufacturer's Warranty

Directions

Similar products from Other Heating & Chilling Equipment

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies