+ Post new Ad
Suburban Angle Vee Step Block with accessories!, US $72 – Picture 0
Suburban Angle Vee Step Block with accessories!, US $72 – Picture 0

Suburban Angle Vee Step Block With Accessories!

US $72

  • Durham, North Carolina, United States
  • May 26th
Open on mobile:
QR code
Surburban angle step v block with accessories in very good condition.  On a scale of 10, I would say this is a minimum of 9.  See how to use it  by watching Don Bailey on Suburban Website.. Included is the yoke clamp, face clamp, and side clamp.e Come see it or have your representative see it, verify the item(s) and the quality of the item(s).  . There is no warranty implied and/or expressed. All items are sold as is and where is, no returns accepted.  It is your right or a representative selected by you to come and see what you are buying before you bid.  No inspection after it is sold.         What you see is what you get in the above pictures and what is described in the listing, no more no less.   Shipping to lower 48 states only Item will ship FEDERAL EXPRESS, USPS, UPS or thru Freight Quote or a carrier of your choice if you arrange transportation, after the first Thursday after payment clears. A telephone number is required for shipping .     OPEN TO ALL QUESTIONS location:17180

Directions

Similar products from Supporting Blocks & Sets

LUFKIN NO. 905 V-BLOCK

LUFKIN NO. 905 V-BLOCK

  • Riverside, California, United States
  • May 26th
Precision V Block 6"x6"x4" 90 Degree Angle Heavy Duty

Precision V Block 6"x6"x4" 90 Degree Angle Heavy Duty

  • Story City, Iowa, United States
  • May 26th
Custom Workholding Fixtures for Dial Indicators Precision Measurement

Custom Workholding Fixtures for Dial Indicators Precision Measurement

  • Story City, Iowa, United States
  • May 26th
Precision V-Blocks with Clamps - NOS in Box R.C. Hunter Co. Detroit

Precision V-Blocks with Clamps - NOS in Box R.C. Hunter Co. Detroit

  • Sterling Heights, Michigan, United States
  • May 26th
HHIP 3402-0019 17 Piece Angle Block Set

HHIP 3402-0019 17 Piece Angle Block Set

  • Tallman, New York, United States
  • May 26th
MACHINIST TOOLS LATHE MILL Machinsit 2 Brown and Sharpe V Block s and Clamp s

MACHINIST TOOLS LATHE MILL Machinsit 2 Brown and Sharpe V Block s and Clamp s

  • Morris Plains, New Jersey, United States
  • May 26th
MACHINIST LATHE MILL Machinist 2 Starrett Hold Down Blocks for Set Up

MACHINIST LATHE MILL Machinist 2 Starrett Hold Down Blocks for Set Up

  • Morris Plains, New Jersey, United States
  • May 26th
LUFKIN 6 INCH HOLD DOWNS No. 902

LUFKIN 6 INCH HOLD DOWNS No. 902

  • Stevensville, Michigan, United States
  • May 26th
Kendrick and Davis Machinist Bench Block Tool #1087-B

Kendrick and Davis Machinist Bench Block Tool #1087-B

  • Millsboro, Delaware, United States
  • May 26th
Tool Block

Tool Block

  • Plano, Illinois, United States
  • May 26th
SUBURBAN TOOL 6 inch SINE PLATE

SUBURBAN TOOL 6 inch SINE PLATE

  • Durham, North Carolina, United States
  • May 26th
Machinist / Toolmakers Bench Block 4 3/16x3x2 3/16" precision ground

Machinist / Toolmakers Bench Block 4 3/16x3x2 3/16" precision ground

  • Hadley, Pennsylvania, United States
  • May 26th
General No. 116 V-Blocks and Clamp Set

General No. 116 V-Blocks and Clamp Set

  • Cobleskill, New York, United States
  • May 26th
MACHINIST TOOLS LATHE MILL Machinist Lot of Large V Block s for Set Up

MACHINIST TOOLS LATHE MILL Machinist Lot of Large V Block s for Set Up

  • Morris Plains, New Jersey, United States
  • May 26th
MACHINIST TOOLS LATHE MILL Machinist Large Tool Makers Block Fixture for Set Up

MACHINIST TOOLS LATHE MILL Machinist Large Tool Makers Block Fixture for Set Up

  • Morris Plains, New Jersey, United States
  • May 26th
machinist tools Lot/ Toolmaker/ Mill/ Lathe Hss Some Cobalt Lathe Tool Bits Lot

machinist tools Lot/ Toolmaker/ Mill/ Lathe Hss Some Cobalt Lathe Tool Bits Lot

  • Sebastopol, California, United States
  • May 26th
SPI Machinist Tools Setup Block Set

SPI Machinist Tools Setup Block Set

  • Lakemont, Georgia, United States
  • May 26th
Vintage Unbranded 5 Pc(1.000 to .125) Steel Plug Pin Gage Machinst Tools

Vintage Unbranded 5 Pc(1.000 to .125) Steel Plug Pin Gage Machinst Tools

  • Tampa, Florida, United States
  • May 26th
Lufkin 902E Hold-Down 6"

Lufkin 902E Hold-Down 6"

  • Long Beach, California, United States
  • May 26th
Machinist Toolmaker v block 5 1/8 x 2 3/8 x 1 3/4

Machinist Toolmaker v block 5 1/8 x 2 3/8 x 1 3/4

  • Hadley, Pennsylvania, United States
  • May 26th

People who viewed this item also vieved

Jacobs Rubber Flex Collets 2 boxes, as shown

Jacobs Rubber Flex Collets 2 boxes, as shown

  • San Jose, California, United States
  • Feb 13th
Lyndex-Nikken C4047-0032-9.00" ER32 Collet Chuck

Lyndex-Nikken C4047-0032-9.00" ER32 Collet Chuck

  • Skokie, Illinois, United States
  • Feb 13th
Carbide insert tool holder assortment

Carbide insert tool holder assortment

  • Wappingers Falls, New York, United States
  • Feb 13th
Heavy Duty Angle Sine Plate 7"x11-1/2" Surface

Heavy Duty Angle Sine Plate 7"x11-1/2" Surface

  • United States
  • Feb 15th
lot of 4 Threaded plates M6 T-nut 20x20x4mm

lot of 4 Threaded plates M6 T-nut 20x20x4mm

  • Petach-Tiqwa, Central, Israel
  • Feb 15th
7 1/4" FACE / DRIVE PLATE 1-1/2" x 8 TPI ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE

7 1/4" FACE / DRIVE PLATE 1-1/2" x 8 TPI ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE

  • Spring Valley, California, United States
  • Feb 15th
PAIR OF PITTSBURGH 11" SWIVEL PAD LOCK GRIP PLIERS CLAMP 2-3/4" THROAT

PAIR OF PITTSBURGH 11" SWIVEL PAD LOCK GRIP PLIERS CLAMP 2-3/4" THROAT

  • La Puente, California, United States
  • Feb 22nd
5MT Live Center & Point Set, 8 Interchangeable Points, .039 to 1.771" |(73B)

5MT Live Center & Point Set, 8 Interchangeable Points, .039 to 1.771" |(73B)

  • Saint Louis, Missouri, United States
  • Feb 23rd
Starrett 161-B parallel clamps

Starrett 161-B parallel clamps

  • Rochester, New York, United States
  • Feb 23rd
CLAMP MFG KANT-TWIST 401 1" T-HANDLE CLAMP MACHINISTS CLAMP NEW/UNUSED

CLAMP MFG KANT-TWIST 401 1" T-HANDLE CLAMP MACHINISTS CLAMP NEW/UNUSED

  • Ringwood, New Jersey, United States
  • Feb 23rd
Machinists Vise

Machinists Vise

  • Duluth, Minnesota, United States
  • Feb 23rd
MT#3 Precision Live Lathe Center

MT#3 Precision Live Lathe Center

  • Waterbury, Connecticut, United States
  • Feb 23rd
DUNLAP 506.51770 BENCH VISE 3-1/2" JAW LOCKING SWIVEL BASE PIPE JAW

DUNLAP 506.51770 BENCH VISE 3-1/2" JAW LOCKING SWIVEL BASE PIPE JAW

  • Yucaipa, California, United States
  • Feb 23rd
Lathe Centers - High Quality #4 Taper - LOOK!

Lathe Centers - High Quality #4 Taper - LOOK!

  • Applegate, California, United States
  • Feb 24th
MACHINIST TOOLS LATHE MILL Nice Lathe Live Center

MACHINIST TOOLS LATHE MILL Nice Lathe Live Center

  • Morris Plains, New Jersey, United States
  • Feb 24th
TTC 220-09191 Revolving Tailstock Turret Drill Chuck for 5" Turret

TTC 220-09191 Revolving Tailstock Turret Drill Chuck for 5" Turret

  • Duncan, South Carolina, United States
  • Feb 24th
Kitagawa B-210 10" 3 Jaw Power Lathe Chuck

Kitagawa B-210 10" 3 Jaw Power Lathe Chuck

  • Millstone Township, New Jersey, United States
  • Feb 24th
8 " ATS CNC Lathe Chuck

8 " ATS CNC Lathe Chuck

  • Chatsworth, California, United States
  • Feb 24th
JERGENS #24708 Insert Tool for Keylocking Inserts 5/8" Made in USA

JERGENS #24708 Insert Tool for Keylocking Inserts 5/8" Made in USA

  • Crystal Lake, Illinois, United States
  • Mar 25th
18" x 46" Cast Iron Welding / Layout Table, Off Matsuura MC-800VDC VMC, Used

18" x 46" Cast Iron Welding / Layout Table, Off Matsuura MC-800VDC VMC, Used

  • Grand Rapids, Michigan, United States
  • Mar 25th
JERGENS #26925 1/4-28 x 1 Steel Tip Spring Plunger Made in USA

JERGENS #26925 1/4-28 x 1 Steel Tip Spring Plunger Made in USA

  • Crystal Lake, Illinois, United States
  • Mar 26th
ACCURA/VERTEX HV-10 10 INCH HORIZONTAL/VERTICAL ROTARY TABLE

ACCURA/VERTEX HV-10 10 INCH HORIZONTAL/VERTICAL ROTARY TABLE

  • Beaver Falls, Pennsylvania, United States
  • May 25th
Troyke UP-20 Horizontal and Vertical Rotary Table with Custom Cart

Troyke UP-20 Horizontal and Vertical Rotary Table with Custom Cart

  • Richmond, Virginia, United States
  • May 25th
7” Centerline Rotary Table Dividing Head Tailstock

7” Centerline Rotary Table Dividing Head Tailstock

  • Euclid, Ohio, United States
  • May 25th
Techniks BT 30 ER 16x 60mm 25K RPM @ G2.5 Balanced CNC Collet Chuck-.0001" TIR

Techniks BT 30 ER 16x 60mm 25K RPM @ G2.5 Balanced CNC Collet Chuck-.0001" TIR

  • Hamden, Connecticut, United States
  • May 28th
Novelty USB Ports W/2GB Storage-Owl

Novelty USB Ports W/2GB Storage-Owl

  • Hickory Hills, Illinois, United States
  • May 28th
"Woodware Clear Stamps 3.5""X5.5""-Funny Snowman"

"Woodware Clear Stamps 3.5""X5.5""-Funny Snowman"

  • Hickory Hills, Illinois, United States
  • May 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies