+ Post new Ad
SUNNEN BL6 185CS MANDREL HONES in ORIGINAL BOX, US $25.99 – Picture 0
SUNNEN BL6 185CS MANDREL HONES in ORIGINAL BOX, US $25.99 – Picture 1
SUNNEN BL6 185CS MANDREL HONES in ORIGINAL BOX, US $25.99 – Picture 2
SUNNEN BL6 185CS MANDREL HONES in ORIGINAL BOX, US $25.99 – Picture 0
SUNNEN BL6 185CS MANDREL HONES in ORIGINAL BOX, US $25.99 – Picture 1
SUNNEN BL6 185CS MANDREL HONES in ORIGINAL BOX, US $25.99 – Picture 2

Sunnen Bl6 185cs Mandrel Hones In Original Box

US $25.99

  • Fort Myers, Florida, United States
  • Jan 30th
Open on mobile:
QR code
This SUNNEN BL6 185CS MANDREL HONES is a must-have item for any machine shop or automotive enthusiast. This exceptional piece of equipment comes straight from a reputable local shop and estate, and is still in impeccable condition within its original box – as seen in the accompanying photographs. Don't miss out on this estate #01-2250! Take advantage of this rare opportunity to acquire such a high caliber appliance and peruse other items from this machine and auto estate on our ebay sell site immediately. The winning bidder will cover the cost of shipping.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “good”

Directions

Similar products from Mandrills

NEW Norton Drill-Mount Mandrel for 2" - 3" Cut-off Wheels (Pack of 1)

NEW Norton Drill-Mount Mandrel for 2" - 3" Cut-off Wheels (Pack of 1)

  • United States
  • Jan 30th
Sunnen Hone Mandrel 660 - New Old Stock with Truing Sleeve, Wedge & Stone

Sunnen Hone Mandrel 660 - New Old Stock with Truing Sleeve, Wedge & Stone

  • Scottsdale, Arizona, United States
  • Jan 30th
SUNNEN SELECTION KIT W/ STONES, SHOES, AND MISC.

SUNNEN SELECTION KIT W/ STONES, SHOES, AND MISC.

  • Cleveland, Ohio, United States
  • Jan 30th
10X MODERN ABRASIVE 7/8" x 2" A11 Cone Mounted Points FINE 1/4-20 Threaded Shank

10X MODERN ABRASIVE 7/8" x 2" A11 Cone Mounted Points FINE 1/4-20 Threaded Shank

  • United States
  • Jan 30th
20 new CARBORUNDUM 3/4" x 1-1/8" M4 1/4" x 1-1/2" A5 Gray Mounted Points 25032

20 new CARBORUNDUM 3/4" x 1-1/8" M4 1/4" x 1-1/2" A5 Gray Mounted Points 25032

  • United States
  • Jan 30th
Mandrels Assorted Sizes 11-0, 18-0, 18-1, 6-0, 14, 0 - 11 Pieces

Mandrels Assorted Sizes 11-0, 18-0, 18-1, 6-0, 14, 0 - 11 Pieces

  • Guntersville, Alabama, United States
  • Jan 30th
SUNNEN HONE MANDREL AAY20-869BS STK1573

SUNNEN HONE MANDREL AAY20-869BS STK1573

  • Wadley, Alabama, United States
  • Jan 30th
SUNNEN HONE G25-J87 STONE SET STK1574

SUNNEN HONE G25-J87 STONE SET STK1574

  • Wadley, Alabama, United States
  • Jan 30th
2 SUNNEN HONE CR12 STONES STK1575

2 SUNNEN HONE CR12 STONES STK1575

  • Wadley, Alabama, United States
  • Jan 30th
SUNNEN HONE MANDREL K20-650AS STK1576

SUNNEN HONE MANDREL K20-650AS STK1576

  • Wadley, Alabama, United States
  • Jan 30th
2 PACKS of 12 SUNNEN MANDREL HONES in ORIGINAL BOXES #L5-A63 & L5-A65

2 PACKS of 12 SUNNEN MANDREL HONES in ORIGINAL BOXES #L5-A63 & L5-A65

  • Fort Myers, Florida, United States
  • Jan 30th
KO LEE KNOCK OUT EXPANDING MANDREL 1-9/16" TO 2-1/2" SLEEVE & CAP

KO LEE KNOCK OUT EXPANDING MANDREL 1-9/16" TO 2-1/2" SLEEVE & CAP

  • Jamestown, New York, United States
  • Jan 30th
KO LEE KNOCK OUT EXPANDING MANDREL 1" CAPACITY INCLUDES SLEEVE & END CAP

KO LEE KNOCK OUT EXPANDING MANDREL 1" CAPACITY INCLUDES SLEEVE & END CAP

  • Jamestown, New York, United States
  • Jan 30th
KO LEE KNOCK OUT EXPANDING MANDREL 11/16"-1" CAPACITY INCLUDES SLEEVE & END CAP

KO LEE KNOCK OUT EXPANDING MANDREL 11/16"-1" CAPACITY INCLUDES SLEEVE & END CAP

  • Jamestown, New York, United States
  • Jan 30th
KO LEE KNOCK OUT EXPANDING MANDREL 1/2" TO 11/16" CAP INCLUDES SLEEVE & END CAP

KO LEE KNOCK OUT EXPANDING MANDREL 1/2" TO 11/16" CAP INCLUDES SLEEVE & END CAP

  • Jamestown, New York, United States
  • Jan 30th
Hone mandrel for Sunnen style adjustable hone 2.75" Superior Hone Corp

Hone mandrel for Sunnen style adjustable hone 2.75" Superior Hone Corp

  • Hudson, New Hampshire, United States
  • Jan 30th
Foredom Mandrel 3/32" Shank Diameter 3/32" Arbor Hole [Misc.]

Foredom Mandrel 3/32" Shank Diameter 3/32" Arbor Hole [Misc.]

  • Summerville, South Carolina, United States
  • Jan 30th
ASSORTED LOT FLEX O LAP LAPPING TOOLS

ASSORTED LOT FLEX O LAP LAPPING TOOLS

  • Ellington, New York, United States
  • Jan 30th
(1) RARE UNION TWIST DRILL CO., LS STARRETT CO. ARBOR / ADAPTER MACHINIST TOOL

(1) RARE UNION TWIST DRILL CO., LS STARRETT CO. ARBOR / ADAPTER MACHINIST TOOL

  • Albuquerque, New Mexico, United States
  • Jan 30th
NOS Vermont American 9/16" to 1-3/16" Hole Saw Mandrel 8501 Made in the USA

NOS Vermont American 9/16" to 1-3/16" Hole Saw Mandrel 8501 Made in the USA

  • Coventry, Rhode Island, United States
  • Jan 30th

People who viewed this item also vieved

( 51 ) PC CAT50 CONSIGNMENT LOT VALENITE SANDVIK KENNAMETAL LYNDEX OTHER CAT 50

( 51 ) PC CAT50 CONSIGNMENT LOT VALENITE SANDVIK KENNAMETAL LYNDEX OTHER CAT 50

  • Dayton, Ohio, United States
  • Mar 27th
PARLEC CAT40 1" DIAMETER ENDMILL HOLDER CAT 40 END MILL LOT C11932

PARLEC CAT40 1" DIAMETER ENDMILL HOLDER CAT 40 END MILL LOT C11932

  • Dayton, Ohio, United States
  • Mar 27th
Nikken BT40-MAC42-180 boring head

Nikken BT40-MAC42-180 boring head

  • Phoenix, Arizona, United States
  • May 14th
R151.21-20-60 1056mm SANDVIK Boring Bar (1pc) New

R151.21-20-60 1056mm SANDVIK Boring Bar (1pc) New

  • Englewood, Florida, United States
  • May 14th
NEW! INGERSOLL 4" INDEXABLE FACE MILL OCTOGAN INSERTS 5N6K05R01

NEW! INGERSOLL 4" INDEXABLE FACE MILL OCTOGAN INSERTS 5N6K05R01

  • Ellington, New York, United States
  • May 30th
WALTER 6" INDEXABLE FACE MILL OCTOGAN INSERTS 2" BORE

WALTER 6" INDEXABLE FACE MILL OCTOGAN INSERTS 2" BORE

  • Ellington, New York, United States
  • May 30th
Large Lot of Sandvik Varilock Accessories

Large Lot of Sandvik Varilock Accessories

  • Johnson City, New York, United States
  • Jun 22nd
W20 SCHAUBLIN / ACIERA 13 mm Milling arbor

W20 SCHAUBLIN / ACIERA 13 mm Milling arbor

  • Nevele, Belgium
  • Jun 22nd
NEW BROWNING H50P22 SPROKET 22 TEETH 50 CHAIN, NEW IN FACTORY BOX, NEW OLD STOCK

NEW BROWNING H50P22 SPROKET 22 TEETH 50 CHAIN, NEW IN FACTORY BOX, NEW OLD STOCK

  • Rockingham, North Carolina, United States
  • May 25th
NEW BROWNING H60P28 SPROKET 28 TEETH 60 CHAIN, NEW IN FACTORY BOX, NEW OLD STOCK

NEW BROWNING H60P28 SPROKET 28 TEETH 60 CHAIN, NEW IN FACTORY BOX, NEW OLD STOCK

  • Rockingham, North Carolina, United States
  • May 25th
BT 40 5/8" END MILL HOLDER STK 6141

BT 40 5/8" END MILL HOLDER STK 6141

  • Wadley, Alabama, United States
  • May 27th
MST BT50 SLSA 1/4 255S56

MST BT50 SLSA 1/4 255S56

  • Saint Helen, Michigan, United States
  • May 27th
JACOBS ENDMILL HOLDER JCBT50-SLN63-120

JACOBS ENDMILL HOLDER JCBT50-SLN63-120

  • Concord, North Carolina, United States
  • May 30th
USED MTJNR 20-4D NL-4D CL-20 TOOL HOLDER 1''-1/4 SQUARE / R HAND / USA

USED MTJNR 20-4D NL-4D CL-20 TOOL HOLDER 1''-1/4 SQUARE / R HAND / USA

  • Houston, Texas, United States
  • May 30th
2 pcs USED CAT 50 TG100 COLLET CHUCK CNC MILL TOOLING CARBOLOY CV50-CC3.12-1000

2 pcs USED CAT 50 TG100 COLLET CHUCK CNC MILL TOOLING CARBOLOY CV50-CC3.12-1000

  • Xenia, Ohio, United States
  • Jun 8th
Mini Quick Change Tool Post For 7"x10", 12", 14" Lathe "Extra Holders Available"

Mini Quick Change Tool Post For 7"x10", 12", 14" Lathe "Extra Holders Available"

  • Burnsville, North Carolina, United States
  • Jun 8th
Supreme Chuck 6T 0-1/2" cap 33 taper 1/2" arbor

Supreme Chuck 6T 0-1/2" cap 33 taper 1/2" arbor

  • Montebello, California, United States
  • Jun 8th
Rohm 1/2" S2A 1/2"-20 Threaded Mount Drill Chuck GERMANY Machinist Tool Lathe

Rohm 1/2" S2A 1/2"-20 Threaded Mount Drill Chuck GERMANY Machinist Tool Lathe

  • Yorktown, Virginia, United States
  • Jun 8th
250w ER11 12000rpm BLDC spindle motor&MACH3 Driver&power supply&bracket CNC kits

250w ER11 12000rpm BLDC spindle motor&MACH3 Driver&power supply&bracket CNC kits

  • DongGuan, China
  • Oct 25th
Sauter VDI 30 Live Tool Holder Drill Tool Chuck & Collet Part#0.5.921.103-77.410

Sauter VDI 30 Live Tool Holder Drill Tool Chuck & Collet Part#0.5.921.103-77.410

  • Staten Island, New York, United States
  • Oct 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies