+ Post new Ad
SUPER DRILL EDM, Drill Cap.:0.2~6MM, Table Size 16"x8" SD16P, US $600 – Picture 0
SUPER DRILL EDM, Drill Cap.:0.2~6MM, Table Size 16"x8" SD16P, US $600 – Picture 0

Super Drill Edm, Drill Cap.:0.2~6mm, Table Size 16"x8" Sd16p

US $600

  • Irvine, California, United States
  • Nov 4th
Open on mobile:
QR code
Gromax SD16P Super Drill EDM Features: X-Y slideways are hardened and ground V-Flat design and faced with "TURCITE-B" for smooth sliding and wear resistance Specifications: ·  Model SD16P Range of electrode 0.2mm~6mm Table size 17"x8" Max. workpiece size 26"x14"x14" Table travel (X,Y) 12"x8" RAM backslide 6.3" Guide travel N/A Quill servo travel 13.7" Dielectric capacity 5.3 Gal. Max. power rating 4 KVA Max. current 50 Amp. On/Off time setting 32 steps Peak current setting 16 steps Stability setting 10 steps Work load 800 Lbs. Layout (L x W x H) 55"x55"x91" Weight 1950 Lbs. Machine structure V/Flat turcite coated table way GROMAX Super Drill EDM Features: Maximum 50 amps. power current. New and Improved "P" system. Drilling 0.039"(1.0 mm) through 1" thick steel in less than 35 seconds. Suitable for drilling through steel, carbide, aluminum and any other conductive material. Fast and accurate deep hole drilling application with capacity from 0.0078" to 0.236" (0.2 mm - 6.0 mm) in diameter or bigger capacity with 120 amp power supply. User friendly control panel interface, minimum skill required to operate. Control Panel Features: Multiple display functions for dimensions, EDM parameter and machining depth setting. Machining stability adjustment: Fine tune and stabilize machining conditions result in finer surface finish. Inch/metric conversion. 0.0002" resolution. Auto quill retract. Center positioning. Machining time timer. EDM parameters recall. Edge find. EDM parameter memory bank stores up to 480 different settings for steel, carbide, and aluminum.  Some parameters are preloaded in memory, user can use these parameters as reference for testing, editing, and recording new data accordingly.   Powered by SixBit's eCommerce Solution

Directions

Similar products from Other Tool Retention Items

Dorian Tool STVO Square Shank Screw Lock Threading Holder, Right-Hand Cut, 1/2"

Dorian Tool STVO Square Shank Screw Lock Threading Holder, Right-Hand Cut, 1/2"

  • USA, United States
  • Nov 6th
Circle Machine Co SCMR-1212D Steel Square Shank Grooving Tool Holder USED

Circle Machine Co SCMR-1212D Steel Square Shank Grooving Tool Holder USED

  • Oak Ridge, Tennessee, United States
  • Nov 6th
Iscar TGFHL 32T33-3 Left Hand, Single End, Indexable Cutoff Blade

Iscar TGFHL 32T33-3 Left Hand, Single End, Indexable Cutoff Blade

  • Cleveland, Ohio, United States
  • Nov 5th
NEW Ultra Tool Company Combo Clamp 92-7-381

NEW Ultra Tool Company Combo Clamp 92-7-381

  • Coleman, Wisconsin, United States
  • Nov 5th
T-Max Sandvik left hand carbide tip holder

T-Max Sandvik left hand carbide tip holder

  • Peabody, Massachusetts, United States
  • Nov 5th
Lot of 11 BT50 Pull Studs CAT 50 Retention Knobs

Lot of 11 BT50 Pull Studs CAT 50 Retention Knobs

  • Oxnard, California, United States
  • Nov 5th
Cobra Carbide SDJCR Indexable Turning Toolholder, DCMT Style, Right Hand, 0.315"

Cobra Carbide SDJCR Indexable Turning Toolholder, DCMT Style, Right Hand, 0.315"

  • USA, United States
  • Nov 5th
Cobra Carbide SDJCL Indexable Turning Toolholder, DCMT Style, Left Hand, 0.500"

Cobra Carbide SDJCL Indexable Turning Toolholder, DCMT Style, Left Hand, 0.500"

  • USA, United States
  • Nov 5th
Jergens 28908 Single Handle Locking Lever 1-1/2" Dia. 5/8-11 HOLE..LOT OF 1

Jergens 28908 Single Handle Locking Lever 1-1/2" Dia. 5/8-11 HOLE..LOT OF 1

  • Louisville, Kentucky, United States
  • Nov 5th
SANDVIK INDEXABLE DRILL R416.1-0254-20-05 STK 9903

SANDVIK INDEXABLE DRILL R416.1-0254-20-05 STK 9903

  • Wadley, Alabama, United States
  • Nov 4th
Kennametal KM 32 3/4" Endmill Holder 2.76" Projection KM32BAE12276 (LOC1223A)

Kennametal KM 32 3/4" Endmill Holder 2.76" Projection KM32BAE12276 (LOC1223A)

  • Laingsburg, Michigan, United States
  • Nov 4th
Kennametal KM 32 5/8" Endmill Holder 2.76" Projection KM32BAE10276 (LOC1950A)

Kennametal KM 32 5/8" Endmill Holder 2.76" Projection KM32BAE10276 (LOC1950A)

  • Laingsburg, Michigan, United States
  • Nov 4th
ALBRECHT CLASSIC KEYLESS 1/2 DRILL CHUCK PICK JT MOUNT

ALBRECHT CLASSIC KEYLESS 1/2 DRILL CHUCK PICK JT MOUNT

  • Columbus, Ohio, United States
  • Nov 4th
RN Battery Charger Starter Car Bike Fork Lift Made In USA Model 126ST 6 12 Volt

RN Battery Charger Starter Car Bike Fork Lift Made In USA Model 126ST 6 12 Volt

  • Columbus, Ohio, United States
  • Nov 4th
Kennametal KM 32 3/8" Endmill Holder 2.76" Projection KM32BAE06276 (LOC1222A)

Kennametal KM 32 3/8" Endmill Holder 2.76" Projection KM32BAE06276 (LOC1222A)

  • Laingsburg, Michigan, United States
  • Nov 4th
SANDVIK CRDCR 3225P 09-A TOOL HOLDER

SANDVIK CRDCR 3225P 09-A TOOL HOLDER

  • Cincinnati, Ohio, United States
  • Nov 3rd
HOLD DOWN CLAMP CDM FOR DYNA-MILL INDEXABLE ENDMILL..LOT OF 1PC.

HOLD DOWN CLAMP CDM FOR DYNA-MILL INDEXABLE ENDMILL..LOT OF 1PC.

  • Louisville, Kentucky, United States
  • Nov 3rd
HAIMER G 2.5 25000 A 80.090.78 78 x 250 HIGH SPEED TOOL HOLDER

HAIMER G 2.5 25000 A 80.090.78 78 x 250 HIGH SPEED TOOL HOLDER

  • Saint Paul, Minnesota, United States
  • Nov 3rd
ABBOTT American Standard Tongue & Groove Jaws Style A CHUCK SIZE: 12''TG12MDS2SQ

ABBOTT American Standard Tongue & Groove Jaws Style A CHUCK SIZE: 12''TG12MDS2SQ

  • Duncan, South Carolina, United States
  • Nov 3rd
CNC TOOL HOLDER

CNC TOOL HOLDER

  • Conroe, Texas, United States
  • Nov 3rd

People who viewed this item also vieved

DeVlieg 3pc SET Quick change Adapter tool holder counterbore cutter countersink

DeVlieg 3pc SET Quick change Adapter tool holder counterbore cutter countersink

  • Grand Rapids, Michigan, United States
  • Jan 30th
Jet AP - 0 Arbor Press New

Jet AP - 0 Arbor Press New

  • North Berwick, Maine, United States
  • Jan 30th
R151.21-20-60 sandvik q-cut Right Hand Coromant T-Max

R151.21-20-60 sandvik q-cut Right Hand Coromant T-Max

  • Englewood, Florida, United States
  • Jan 30th
TMX 1/2" BORING BAR WITH CCMT-21.52-MM CARBIDE INSERTS, GRADE PH6920

TMX 1/2" BORING BAR WITH CCMT-21.52-MM CARBIDE INSERTS, GRADE PH6920

  • Cadiz, Kentucky, United States
  • Jan 30th
BT45-7631-45-1 End Mill Holder - Stock # 0940

BT45-7631-45-1 End Mill Holder - Stock # 0940

  • Dundee, Florida, United States
  • Jan 30th
Nikken BT45-WE 3/4-85 End Mill Holder - Stock #0941

Nikken BT45-WE 3/4-85 End Mill Holder - Stock #0941

  • Dundee, Florida, United States
  • Jan 30th
Hardinge HDB2 9/32" Split Bushing 1/2" OD

Hardinge HDB2 9/32" Split Bushing 1/2" OD

  • Millstone Township, New Jersey, United States
  • Jan 30th
Hardinge HDB2 1/16" Split Bushing 1/2" OD

Hardinge HDB2 1/16" Split Bushing 1/2" OD

  • Millstone Township, New Jersey, United States
  • Jan 30th
Erickson C-146996 End Mill Holder w/New Carbide .750 End Mill

Erickson C-146996 End Mill Holder w/New Carbide .750 End Mill

  • Sherwood, Oregon, United States
  • Jan 30th
Lyndex Collis Parlec Techniks C5016-0750-4.00

Lyndex Collis Parlec Techniks C5016-0750-4.00

  • Beebe, Arkansas, United States
  • Jan 30th
JACOBS NO 6A-33 DRILL CHUCK 1/2" CAPACITY W/ 3MT SHANK & 1-1/2" BUSHING

JACOBS NO 6A-33 DRILL CHUCK 1/2" CAPACITY W/ 3MT SHANK & 1-1/2" BUSHING

  • Ellington, New York, United States
  • Jan 30th
ALBRECHT KEYLESS DRILL CHUCK 3/64" CAP 2 MT SHANK MODEL 1-13

ALBRECHT KEYLESS DRILL CHUCK 3/64" CAP 2 MT SHANK MODEL 1-13

  • Ellington, New York, United States
  • Jan 30th
Early briggs and Stratton ignition coil rewound

Early briggs and Stratton ignition coil rewound

  • Camas, Washington, United States
  • Jan 30th
ISCAR HIGH SHEAR FACE MILL F45NM D50 08-1.5-R08

ISCAR HIGH SHEAR FACE MILL F45NM D50 08-1.5-R08

  • Galion, Ohio, United States
  • Jan 30th
KWIK-WAY FN tool holder (2.825 length) --nt SUNNEN, Goodson, Rottler, Regis

KWIK-WAY FN tool holder (2.825 length) --nt SUNNEN, Goodson, Rottler, Regis

  • Chatham, Ontario, Canada
  • Jan 30th
SUNNEN G25J95 (6 set) abrasives

SUNNEN G25J95 (6 set) abrasives

  • Chatham, Ontario, Canada
  • Jan 30th
WFLK 445 SK 50 Quick Change Tension & Compression Tapping Chuck Sz 4 CAT-50 NEW

WFLK 445 SK 50 Quick Change Tension & Compression Tapping Chuck Sz 4 CAT-50 NEW

  • Middlebury, Indiana, United States
  • Jan 30th
WFLK 445 B SK 50 Quick Change Tension & Compression Tapping Chuck Size 4 CAT-50

WFLK 445 B SK 50 Quick Change Tension & Compression Tapping Chuck Size 4 CAT-50

  • Middlebury, Indiana, United States
  • Jan 30th
300w 12000RPM 12V-48V Spindle Motor Engraver Cutter Marker CNC

300w 12000RPM 12V-48V Spindle Motor Engraver Cutter Marker CNC

  • Beijing, China
  • Jan 30th
Hi-Fi CM6631A 192KHZ to Coaxial Optical SPDIF Convertor DAC Board 24bit USB 2.0

Hi-Fi CM6631A 192KHZ to Coaxial Optical SPDIF Convertor DAC Board 24bit USB 2.0

  • Guangzhou , China
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies