+ Post new Ad
Surgical Steel Drill Bit, 7/64"(2.6 mm)dia x 51/64"(20 mm)flute, Saves$$, Flexes, US $3.49 – Picture 0
Surgical Steel Drill Bit, 7/64"(2.6 mm)dia x 51/64"(20 mm)flute, Saves$$, Flexes, US $3.49 – Picture 1
Surgical Steel Drill Bit, 7/64"(2.6 mm)dia x 51/64"(20 mm)flute, Saves$$, Flexes, US $3.49 – Picture 2
Surgical Steel Drill Bit, 7/64"(2.6 mm)dia x 51/64"(20 mm)flute, Saves$$, Flexes, US $3.49 – Picture 3
Surgical Steel Drill Bit, 7/64"(2.6 mm)dia x 51/64"(20 mm)flute, Saves$$, Flexes, US $3.49 – Picture 4
Surgical Steel Drill Bit, 7/64"(2.6 mm)dia x 51/64"(20 mm)flute, Saves$$, Flexes, US $3.49 – Picture 0
Surgical Steel Drill Bit, 7/64"(2.6 mm)dia x 51/64"(20 mm)flute, Saves$$, Flexes, US $3.49 – Picture 1
Surgical Steel Drill Bit, 7/64"(2.6 mm)dia x 51/64"(20 mm)flute, Saves$$, Flexes, US $3.49 – Picture 2
Surgical Steel Drill Bit, 7/64"(2.6 mm)dia x 51/64"(20 mm)flute, Saves$$, Flexes, US $3.49 – Picture 3
Surgical Steel Drill Bit, 7/64"(2.6 mm)dia x 51/64"(20 mm)flute, Saves$$, Flexes, US $3.49 – Picture 4

Surgical Steel Drill Bit, 7/64"(2.6 Mm)dia X 51/64"(20 Mm)flute, Saves$$, Flexes

US $3.49

  • Cardiff by the Sea, California, United States
  • Jan 30th
Open on mobile:
QR code
Fun Filled Auctions! How many times have you had a small diameter carbide drill bit break off in the material??? What a mess that creates to try to get ahold of it to get it out, etc. You won't have that trouble with a surgical steel bit because it flexes!!! Up for auction is a drill bit that is 2.6 mm in diameter which is very close to 7/64 inches in diameter. (Actually 7/64 inches equals 2.7781 mm). This bit is extremely sharp and the flute(cutting length) is 51/64 inches(20mm) in length. The bit length is 2 5/16 inches long. If you keep emptying the bit, you can drill the entire bit length. I discovered that the surgical steel bits actually can bend a little when you use them so you can really put the pressure on them and they won't break. You can accidentally get a little off line and they won't break. I have saved a lot of money using these bits. They are just great!!  This bit will go through hard and soft wood, ceramics, brick, thin steel, tin and remain sharp. I have used one in my drill motor and my Dremel. I even tested one on the bottom of a glass bottle using water. It was slow but it worked. If you buy one you won't be buying a carbide one again. Have a fun auction!!!!    I plan to ship this item via USPS First Class Mail Service unless otherwise instructed by the buyer. I will not ship to an international buyer until I am contacted to determine the appropriate shipping charges. I strive to have realistic and fair shipping charges to all buyers. I will combine shipping whenever possible for multiple purchases.  PLEASE check out my other auctions as I specialize in a wide variety of treasures. Please check out my feedback and bid with confidence.
Condition New other (see details) :
A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes “This 2 5/16 inch long bit has never been used so it must be new.”

Directions

Similar products from Drill Bits & Sets

63/64TH HIGH SPEED STRAIGHT SHANK DRILL BIT

63/64TH HIGH SPEED STRAIGHT SHANK DRILL BIT

  • Samson, Alabama, United States
  • Jan 30th
Ideal 35-978, 1" x 18" Long Ship Auger Bit

Ideal 35-978, 1" x 18" Long Ship Auger Bit

  • Chillicothe, Missouri, United States
  • Jan 30th
Steel Drilling Hole Saw Tool for Metal Aluminum Sheet Alloy 13mm A070 IUK

Steel Drilling Hole Saw Tool for Metal Aluminum Sheet Alloy 13mm A070 IUK

  • Hong Kong, China
  • Jan 30th
Steel Drilling Hole Saw Tool for Metal Aluminum Sheet Alloy 32mm A088 IUK

Steel Drilling Hole Saw Tool for Metal Aluminum Sheet Alloy 32mm A088 IUK

  • Hong Kong, China
  • Jan 30th
DELTA Accessory Model 17-935 and Model 17-924 (KIT) mortising Attachment NICE!

DELTA Accessory Model 17-935 and Model 17-924 (KIT) mortising Attachment NICE!

  • Oswego, New York, United States
  • Jan 30th
Ideal nailbiter 7/8" power ship auger NEW

Ideal nailbiter 7/8" power ship auger NEW

  • Wainfleet, Ontario, Canada
  • Jan 30th
Four Milwaukee SDS Plus 1/2" X 6" Concrete 2 cutter Drill Bit Bits # 48-20-7471

Four Milwaukee SDS Plus 1/2" X 6" Concrete 2 cutter Drill Bit Bits # 48-20-7471

  • Wainfleet, Ontario, Canada
  • Jan 30th
5 lot Vintage long drill tool bits Greenlee Triwing ?

5 lot Vintage long drill tool bits Greenlee Triwing ?

  • Kissimmee, Florida, United States
  • Jan 30th
Surgical Steel Drill Bit, 3/32"(2.3 mm)dia x 51/64(20 mm)flute, Bit 2 5/16" Long

Surgical Steel Drill Bit, 3/32"(2.3 mm)dia x 51/64(20 mm)flute, Bit 2 5/16" Long

  • Cardiff by the Sea, California, United States
  • Jan 30th
Drill Bit, Surgical Steel, 5/64"(2.0 mm)dia x 5/16(8 mm)flute, Saves$$$$ Flexes

Drill Bit, Surgical Steel, 5/64"(2.0 mm)dia x 5/16(8 mm)flute, Saves$$$$ Flexes

  • Cardiff by the Sea, California, United States
  • Jan 30th
Drill Bit Surgical Steel, 5/64"(2.0 mm) x 51/64"(20 mm)flute, Bit 2 1/8" Long

Drill Bit Surgical Steel, 5/64"(2.0 mm) x 51/64"(20 mm)flute, Bit 2 1/8" Long

  • Cardiff by the Sea, California, United States
  • Jan 30th
5 " long Surgical Steel Drill Bit, 5/64"(2.0 mm)dia x 1 5/32(29.5 mm)flute Save$

5 " long Surgical Steel Drill Bit, 5/64"(2.0 mm)dia x 1 5/32(29.5 mm)flute Save$

  • Cardiff by the Sea, California, United States
  • Jan 30th
Surgical Steel Drill Bit, 3/32"(2.3 mm)dia x 41/64(16 mm)flute, Save$$$-Flexes

Surgical Steel Drill Bit, 3/32"(2.3 mm)dia x 41/64(16 mm)flute, Save$$$-Flexes

  • Cardiff by the Sea, California, United States
  • Jan 30th
Surgical Steel Drill Bit, 1/16"(1.5 mm)dia x 5/16(8 mm)flute, Bit 2" Long

Surgical Steel Drill Bit, 1/16"(1.5 mm)dia x 5/16(8 mm)flute, Bit 2" Long

  • Cardiff by the Sea, California, United States
  • Jan 30th
4 High Speed Steel Morse Taper #2 Shank Drill Bits 3/4 29/32 5/8 17/32

4 High Speed Steel Morse Taper #2 Shank Drill Bits 3/4 29/32 5/8 17/32

  • Marcus Hook, Pennsylvania, United States
  • Jan 30th
O'Berry 3261 Squeeeeek No More Screw Driver Bit USA

O'Berry 3261 Squeeeeek No More Screw Driver Bit USA

  • Millbrook, Alabama, United States
  • Jan 30th
Steel Drilling Hole Saw Tool for Metal Aluminum Sheet Alloy 14mm A071 GAU

Steel Drilling Hole Saw Tool for Metal Aluminum Sheet Alloy 14mm A071 GAU

  • Hong Kong, China
  • Jan 30th
Steel Drilling Hole Saw Tool for Metal Aluminum Sheet Alloy 16mm A073 GAU

Steel Drilling Hole Saw Tool for Metal Aluminum Sheet Alloy 16mm A073 GAU

  • Hong Kong, China
  • Jan 30th
Steel Drilling Hole Saw Tool for Metal Aluminum Sheet Alloy 17mm A074 GAU

Steel Drilling Hole Saw Tool for Metal Aluminum Sheet Alloy 17mm A074 GAU

  • Hong Kong, China
  • Jan 30th
Steel Drilling Hole Saw Tool for Metal Aluminum Sheet Alloy 18mm A075 GAU

Steel Drilling Hole Saw Tool for Metal Aluminum Sheet Alloy 18mm A075 GAU

  • Hong Kong, China
  • Jan 30th

People who viewed this item also vieved

Delta/Rockwell 12" Gap Bed Wood Lathes Service Owner's Manual Parts List

Delta/Rockwell 12" Gap Bed Wood Lathes Service Owner's Manual Parts List

  • Naperville, Illinois, United States
  • May 24th
PLANNING AND BUILDING YOUR HOME WORKSHOP, DAVID MANNERS, 1980, 220 PAGES

PLANNING AND BUILDING YOUR HOME WORKSHOP, DAVID MANNERS, 1980, 220 PAGES

  • Inglis, Florida, United States
  • May 24th
Powermatic wood lathe bed extension model 3520

Powermatic wood lathe bed extension model 3520

  • Montgomery, Alabama, United States
  • May 24th
2 x BAHCO QCB-150 6” / 150mm QUICK CLAMP – 200kg CLAMPING FORCE

2 x BAHCO QCB-150 6” / 150mm QUICK CLAMP – 200kg CLAMPING FORCE

  • Bentleigh, VIC, Australia
  • May 30th
Pony Tools 13025 Light Duty Clamp On Vise 3" Jaw Width 2-1/2" Opening Capacity

Pony Tools 13025 Light Duty Clamp On Vise 3" Jaw Width 2-1/2" Opening Capacity

  • Jamestown, Tennessee, United States
  • May 30th
COLUMBIAN 7" x 4" WOODWORKING VISE (AS-IS)

COLUMBIAN 7" x 4" WOODWORKING VISE (AS-IS)

  • Baltimore, Maryland, United States
  • May 30th
WHITESIDE TEMPLATE BIT # 3010

WHITESIDE TEMPLATE BIT # 3010

  • Portsmouth, Ohio, United States
  • Jun 2nd
WHITESIDE TEMPLATE BIT PART# 3000

WHITESIDE TEMPLATE BIT PART# 3000

  • Portsmouth, Ohio, United States
  • Jun 2nd
5pcs 3.175*1.0*4mm 1 Flute Aluminum Cutter End Mill CNC router bits Cu PVC

5pcs 3.175*1.0*4mm 1 Flute Aluminum Cutter End Mill CNC router bits Cu PVC

  • CN, China
  • Jun 2nd
4” SANDING DISC’S (Flat Face)) SD490 7/8 Bore Green Coarse

4” SANDING DISC’S (Flat Face)) SD490 7/8 Bore Green Coarse

  • Iron River, Michigan, United States
  • Jun 7th
Waterfall Bubinga (Kewazinga) wood veneer 13" x 78" raw no backing 1/32" thick

Waterfall Bubinga (Kewazinga) wood veneer 13" x 78" raw no backing 1/32" thick

  • Louisville, Kentucky, United States
  • Jun 7th
Walnut wood veneer 24" x 48" on paper backer "A" grade quality 1/40th" thickness

Walnut wood veneer 24" x 48" on paper backer "A" grade quality 1/40th" thickness

  • Louisville, Kentucky, United States
  • Jun 7th
Wood Veneer Zebrawood 48x121 1 Piece Wood Backed "EXOTIC" MIA 78

Wood Veneer Zebrawood 48x121 1 Piece Wood Backed "EXOTIC" MIA 78

  • Jeffersonville, Indiana, United States
  • Jun 7th
Crown 235 1/4-Inch 6-mm Milled Flute Spindle Gouge

Crown 235 1/4-Inch 6-mm Milled Flute Spindle Gouge

  • USA, United States
  • Jun 8th
BOSTITCH 16-221 3-Inch by 7-1/2-Inch Brick Set

BOSTITCH 16-221 3-Inch by 7-1/2-Inch Brick Set

  • USA, United States
  • Jun 8th
Concord Blades WCB0725T080HP 7-1/4-Inch 80 Teeth TCT General Purpose Hard & Soft

Concord Blades WCB0725T080HP 7-1/4-Inch 80 Teeth TCT General Purpose Hard & Soft

  • USA, United States
  • Jun 8th
Concord Blades WCB1000T060HP 10-Inch 60 Teeth TCT General Purpose Hard & Soft

Concord Blades WCB1000T060HP 10-Inch 60 Teeth TCT General Purpose Hard & Soft

  • USA, United States
  • Jun 8th
Concord Blades WCB1000T040HP 10-Inch 40 Teeth TCT General Purpose Hard & Soft

Concord Blades WCB1000T040HP 10-Inch 40 Teeth TCT General Purpose Hard & Soft

  • USA, United States
  • Jun 8th
Shopsmith Mark V Planer, Speed Increaser and Decreaser Clamps

Shopsmith Mark V Planer, Speed Increaser and Decreaser Clamps

  • Concord, North Carolina, United States
  • Jun 19th
Manual Hand Grinder

Manual Hand Grinder

  • Bedford, Texas, United States
  • Jun 19th
Shaper Cutter

Shaper Cutter

  • Niles, Ohio, United States
  • Jun 20th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies