+ Post new Ad
SWIVEL BASE FOR 6" MILLING MACHINE VISE - 1-3/8" SPUD DIAMETER, US $65.00 – Picture 0
SWIVEL BASE FOR 6" MILLING MACHINE VISE - 1-3/8" SPUD DIAMETER, US $65.00 – Picture 1
SWIVEL BASE FOR 6" MILLING MACHINE VISE - 1-3/8" SPUD DIAMETER, US $65.00 – Picture 2
SWIVEL BASE FOR 6" MILLING MACHINE VISE - 1-3/8" SPUD DIAMETER, US $65.00 – Picture 0
SWIVEL BASE FOR 6" MILLING MACHINE VISE - 1-3/8" SPUD DIAMETER, US $65.00 – Picture 1
SWIVEL BASE FOR 6" MILLING MACHINE VISE - 1-3/8" SPUD DIAMETER, US $65.00 – Picture 2

Swivel Base For 6" Milling Machine Vise - 1-3/8" Spud Diameter

US $65.00

  • Chino, California, United States
  • Jan 30th
Open on mobile:
QR code
We mark all of our items to prevent dishonest buyers from exchanging our item with their non-working one. If you have any inquiries or are searching for a specific item, please contact us at 909.919.9600. Its overall dimensions are 14" x 10-3/4" x 2". This swivel base for a 6" milling machine vise has a spud diameter of 1-3/8". We aim to provide excellent customer service and will do what it takes to solve any issues. Shipping on multiple tooling items with a gross weight of under 100 lbs receives a 30% discount per item after the first item's shipping cost is paid in full. We offer a variety of metalworking machines and tooling, both new and used. Please leave a 5-star rating for us after receiving your item, and contact us with any issues or problems before giving feedback. The item is in great condition, and returns are accepted for unused items only. We thoroughly inspect all items before sending them out. We appreciate all honest customers and are committed to providing superior customer service to everyone. Machines do not apply to this shipping offer.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “7/10 GREAT!”

Directions

Similar products from Grips & Tongs

Machinist Precision Vise Micrometer Head .001-1.060 Range On Movable End

Machinist Precision Vise Micrometer Head .001-1.060 Range On Movable End

  • Wheatland, Pennsylvania, United States
  • Jan 30th
4 in Steel V-Block Matched Vises Pairs - Machine - Holding - Accurately ground-

4 in Steel V-Block Matched Vises Pairs - Machine - Holding - Accurately ground-

  • Hesperia, California, United States
  • Jan 30th
Chick tall JAW SET MJQ1540-150.70 150mm X 70mm (MQL-1540) CNC Work-holding

Chick tall JAW SET MJQ1540-150.70 150mm X 70mm (MQL-1540) CNC Work-holding

  • Long Beach, California, United States
  • Jan 30th
6" Kurt Parallel Keeper Save Part Change Time USA KPS-6000

6" Kurt Parallel Keeper Save Part Change Time USA KPS-6000

  • Columbus, Ohio, United States
  • Jan 30th
3 Inch Baby Mill and Machine Vise-New

3 Inch Baby Mill and Machine Vise-New

  • Chino, California, United States
  • Jan 30th
Adjustable Angle Milling Vise w/Swivel Base- 4" Jaw Opening, 4" W, 1-3/4" D/38C/

Adjustable Angle Milling Vise w/Swivel Base- 4" Jaw Opening, 4" W, 1-3/4" D/38C/

  • Saint Louis, Missouri, United States
  • Jan 30th
Ridgid #23 1/8"-3" Pipe Threading Vise/Clamp

Ridgid #23 1/8"-3" Pipe Threading Vise/Clamp

  • United States
  • Jan 30th
8" Neiko Vise Steel Tool Heavy Duty 60,000 PSI Tensile Strength

8" Neiko Vise Steel Tool Heavy Duty 60,000 PSI Tensile Strength

  • Weiner, Arkansas, United States
  • Jan 30th
Cross Slide Vise 6" inch Wide Drill Press X - Y Clamp Milling Heavy Duty

Cross Slide Vise 6" inch Wide Drill Press X - Y Clamp Milling Heavy Duty

  • Los Angeles, California, United States
  • Jan 30th
Heavy Duty Machine Milling Vise 8-1/2" Jaws 7" Opening

Heavy Duty Machine Milling Vise 8-1/2" Jaws 7" Opening

  • United States
  • Jan 30th
Wilton 63200 5-1/2" Tradesman Vise

Wilton 63200 5-1/2" Tradesman Vise

  • United States
  • Jan 30th
Hand Vise, General #815

Hand Vise, General #815

  • Portsmouth, Virginia, United States
  • Jan 30th
1 Pair The Original Snap Jaws 1" Hardened Step 6"Long

1 Pair The Original Snap Jaws 1" Hardened Step 6"Long

  • Carrollton, Ohio, United States
  • Jan 30th
USED 4" Cam Action Drill Press Vise

USED 4" Cam Action Drill Press Vise

  • Holland, Ohio, United States
  • Jan 30th
EXCELLENT!! YUASA UNIVERSAL 3-WAY ANGLE VISE #550-060

EXCELLENT!! YUASA UNIVERSAL 3-WAY ANGLE VISE #550-060

  • Chino, California, United States
  • Jan 30th
Colbert Industries PanaVise PanaPress

Colbert Industries PanaVise PanaPress

  • Ventura, California, United States
  • Jan 30th
Dayton Metal 8" Sliding Vise Press

Dayton Metal 8" Sliding Vise Press

  • Ventura, California, United States
  • Jan 30th
Enco Cast Aluminum Vise Stop 209-9007

Enco Cast Aluminum Vise Stop 209-9007

  • Elmhurst, Illinois, United States
  • Jan 30th
USED WOLF JAHN COMPOUND CROSS SLIDE ~MADE IN GERMANY~

USED WOLF JAHN COMPOUND CROSS SLIDE ~MADE IN GERMANY~

  • San Bernardino, California, United States
  • Jan 30th
Reed Yoke Pipe Vise No. 71 2.5" Diameter Reed Mfg Co Erie PA Bench Vise

Reed Yoke Pipe Vise No. 71 2.5" Diameter Reed Mfg Co Erie PA Bench Vise

  • Akron, Ohio, United States
  • Jan 30th

People who viewed this item also vieved

Bridgeport B-3 Collet (1)

Bridgeport B-3 Collet (1)

  • Ashville, Pennsylvania, United States
  • Jun 10th
6 NOS Hardinge 2H Round Collets 7/32, 1/4, 3/8, 7/16, (2) 5/8"

6 NOS Hardinge 2H Round Collets 7/32, 1/4, 3/8, 7/16, (2) 5/8"

  • Coldwater, Ohio, United States
  • Jun 10th
Vintage Collet Rack w/ 3-AT Collets, Nose Piece, Spindle Cap from Atlas Lathe

Vintage Collet Rack w/ 3-AT Collets, Nose Piece, Spindle Cap from Atlas Lathe

  • Rocky Point, New York, United States
  • Jun 11th
(3) THREE VLIER TH106 ADJUSTABLE TORQUE HANDLES 1/2-13

(3) THREE VLIER TH106 ADJUSTABLE TORQUE HANDLES 1/2-13

  • Hollister, California, United States
  • Jun 24th
Machinist Metalworking Adjustable Tilt Table

Machinist Metalworking Adjustable Tilt Table

  • Suffern, New York, United States
  • Jun 24th
Cast Iron Angle Plate

Cast Iron Angle Plate

  • Dayton, Ohio, United States
  • Jun 25th
MITEE-BITE PRODUCTS INC 31350 Fixture Clamp, ID Xpansn#6, 5/8-11, 1-3/4in, @2B@

MITEE-BITE PRODUCTS INC 31350 Fixture Clamp, ID Xpansn#6, 5/8-11, 1-3/4in, @2B@

  • Saint Louis, Missouri, United States
  • May 24th
Billings Heavy Service 1-1/2" C-Clamp

Billings Heavy Service 1-1/2" C-Clamp

  • Greenville, Pennsylvania, United States
  • May 24th
MERRILL BROTHERS 1 TON CLAMP WITH RING

MERRILL BROTHERS 1 TON CLAMP WITH RING

  • Goffstown, New Hampshire, United States
  • May 24th
BRISTOL ERICKSON COLLET EXTENSION r7007

BRISTOL ERICKSON COLLET EXTENSION r7007

  • Wadalba, NSW, Australia
  • May 25th
Set-TRU'Precision Self-Centering Scroll Chuck

Set-TRU'Precision Self-Centering Scroll Chuck

  • Duncan, South Carolina, United States
  • May 25th
Set-TRU'Precision Self-Centering Scroll Chuck - Chuck Size: 8'

Set-TRU'Precision Self-Centering Scroll Chuck - Chuck Size: 8'

  • Duncan, South Carolina, United States
  • May 25th
Bison-Bial MT#5 Precision Live Lathe Center-.0004 TIR

Bison-Bial MT#5 Precision Live Lathe Center-.0004 TIR

  • Hamden, Connecticut, United States
  • May 27th
Royal changeable-point live center

Royal changeable-point live center

  • Dayton, Ohio, United States
  • May 27th
Heavy Steel 4" Dead Center From Vintage Metal Lathe 1 5/8" & 1 3/8" Diameter

Heavy Steel 4" Dead Center From Vintage Metal Lathe 1 5/8" & 1 3/8" Diameter

  • Troy, Michigan, United States
  • May 27th
80-23 80-24 Kurt Style milling machine vice handle 7/8 hex

80-23 80-24 Kurt Style milling machine vice handle 7/8 hex

  • Middlebury, Indiana, United States
  • Jun 3rd
PRECISION BRAND * ARBOR SHIMS 3/4 X 1-1/8 X .008 BAG OF 20 NIB

PRECISION BRAND * ARBOR SHIMS 3/4 X 1-1/8 X .008 BAG OF 20 NIB

  • Sunman, Indiana, United States
  • Jun 3rd
OKO Magnets, 2-7/8" Square Magnetic on-off V-Block Machinist Workholding

OKO Magnets, 2-7/8" Square Magnetic on-off V-Block Machinist Workholding

  • Pierson, Michigan, United States
  • Jun 3rd
8" Bison Adjustable Tailstock NEW

8" Bison Adjustable Tailstock NEW

  • Carrollton, Ohio, United States
  • Jun 6th
TROYKE 10" CNC ROTARY TABLE

TROYKE 10" CNC ROTARY TABLE

  • Santa Paula, California, United States
  • Jun 6th
EIMELDINGEN 48" ROUND PLATE, 30" ROUND TABLE, 8" T/SLOT, CNC ROTARY TABLE

EIMELDINGEN 48" ROUND PLATE, 30" ROUND TABLE, 8" T/SLOT, CNC ROTARY TABLE

  • Dallas, Texas, United States
  • Jun 6th
7” x 4” x 3” Vee Block

7” x 4” x 3” Vee Block

  • Euclid, Ohio, United States
  • Jun 7th
3.8” x 3.7” x 4” Vee Block

3.8” x 3.7” x 4” Vee Block

  • Euclid, Ohio, United States
  • Jun 7th
4” x 3.75” x 2.25” Vee Block

4” x 3.75” x 2.25” Vee Block

  • Euclid, Ohio, United States
  • Jun 7th
Penny Black Creative Dies-Christmas Kiss

Penny Black Creative Dies-Christmas Kiss

  • Hickory Hills, Illinois, United States
  • Jun 10th
AdornIt ArtPlay Coloring Book-This 'n That

AdornIt ArtPlay Coloring Book-This 'n That

  • Hickory Hills, Illinois, United States
  • Jun 10th
Creativity Essentials A5 Clear Stamps-Geometric Neon

Creativity Essentials A5 Clear Stamps-Geometric Neon

  • Hickory Hills, Illinois, United States
  • Jun 10th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies