Synrad J48 2s Sgc 25w Co2 Laser From A Working Gcc Jupiter J-25 Laser Engraver

US $775.00

Cleveland, Mississippi, United States
Jul 5th

Open on mobile:
QR code

Manufacturer: Synrad Condition: Used. Removed from a working GCC Pinnacle Jupiter J-25 laser engraver. 8 cooling fans attached to the module are included in this listing. Comes in non-original packaging. It is excellent cosmetic condition except for some dust on the laser module and the fans. J48-2S-SGC is sold as a 25W laser. Notes: This laser module was removed from a working GCC Jupiter J-25 laser engraver. Sorry, we are not equipped to properly measure laser power, but it has been used to engrave on stainless steel until it was decommissioned. This module was designed for easy gas recharge capability. We also have the main board, power supply, power distribution modules with the capacitor, LCD display, laser focusing lenses (1.5”, 2.0”, and 2.5”), main focusing lens, mirrors, X-, Y- and Z-axis servo motors, cables, and other parts from the same J-25 laser engraver. No manuals, cords/cables, or additional items are included if not listed or shown. Included: (1) Synrad J48-2S CO2 Laser (8) Cooling Fans Specifications (from the Manufacturer): Manufacturer: Synrad Model: J48-2S Carbon Dioxide Laser Rated power: 25W @ 10.6 µm Mode Quality: M < 1.2 Ellipticity: <1.2 Rise time: <150µsec Beam diameter: 3.5mm Beam divergence (full angle): 4mR Wavelength: 10.57-10.63µm typical Air cooled (250CFM fans x4) Heat load (maximum): 500W Input power: 30VDC 14A Dimensions: 31.9" x 2.8" x 4.2" Intended for marking, engraving and coding applications Mechanically robust for demanding industrial environments "All-metal" tube technology Compact, light weight OEM version (no key switch, no shutter switch) Designed for easy gas refill service Variable output power controlled with PWM signal CW output requires simple 5V signal Provisions for fault monitoring, remote interlock, and failure shutdown options Removable metal front plate for mounting external shutter, optics, etc. (see photo #3) Power supply: Astec MP6-1Q-1Q-2S-01(-546) P/N: 73-560-5046 AC to DC converter Input: 100-240V 50/60/400Hz Output: Modular, 600W maximum Outputs: V1: 24V up to 8.5A V2: 24V up to 8.5A V3: 30V up to 11A Fan cooled

“Used. Removed from a working GCC Pinnacle Jupiter J-25 laser engraver. 8 cooling fans attached to the module are included in this listing. Comes in non-original packaging. It is excellent cosmetic condition except for some dust on the laser module and the fans. J48-2S-SGC is sold as a 25W laser. Notes: This laser module was removed from a working GCC Jupiter J-25 laser engraver. Sorry, we are not equipped to properly measure laser power, but it has been used to engrave on stainless steel until it was decommissioned. This module was designed for easy gas recharge capability.”

Model

J48

MPN

J48-2S-SGC

Type

Parts/Accessories

Power

25W

Engraving Method

Laser

Brand

SYNARD