T834 Usb Multi-interface 2.5-10.8v, 1.5a Stepper Motor Controller (soldered)

US $31.95

Swanton, Vermont, United States
Aug 7th

Open on mobile:
QR code

Description DRV8834 Stepper Motor driver with 1.5A of continuous current Control interface: USB, non-inverted TTL serial, I2C RC servo pulses, analog voltage, quadrature encoder Operating voltage: 2.5 - 10.8 V Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32 Header pins soldered The T834 USB Multi-Interface 2.5-10.8V, 1.5A Stepper Motor Controller (Soldered) makes basic control of a stepper motor easy, with quick configuration over USB using the free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a TI DRV8834 driver and male headers and terminal blocks are included but not soldered. It can operate from 2.5 V to 10.8 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2 A max with sufficient additional cooling). Specifications Model: Tic T834 Motor driver: DRV8834 Control interface: USB, non-inverted TTL serial, I2C RC servo pulses; analog voltage; quadrature encoder Minimum operating voltage: 2.5 V Maximum operating voltage: 10.8 V Continuous current per phase: 1.5 A Maximum current per phase: 2 A Maximum step rate: 50000 PPS Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32 Reverse voltage protection Header pins soldered Other features 1.5A Stepper Motor Controller Acceleration and deceleration limiting Maximum stepper speed: 50,000 steps per second Very slow speeds down to 1 step every 200 seconds (or 1 step every 1428 seconds with reduced resolution). Six different microstep resolutions: full step, half step, 1/4 step, 1/8 step, 1/16 step, and 1/32 step USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC) Digitally adjustable current limit Optional safety controls to avoid unexpectedly powering the motor Input calibration (learning) and adjustable scaling degree for analog and RC signals 5 V regulator (no external logic voltage supply needed) Optional kill switch inputs Dimensions 1.50″ × 1.05″ × 0.42″ Weight: 5.1 g Multimedia

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Pololu
Type	Pololu
MPN	3132
UPC	Does not apply