US $706.00
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Brand | TAFT-PEIRCE |
ItemPackageQuantity | 1 | ||
MPN | 9130 | ||
Features | Precision Single 2-7/8 In.x4 In.x2-7/8 In. V- | ||
Width | 3.500 | ||
Length | 5.750 | ||
Weight | 7 |
Directions
Similar products from Supporting Blocks & Sets
Used Machinist Precision Work Set Up Steel Holding Block
SUBURBAN VB-688-MCI Matched Pair Of 6"x8"x8" Cast Iron V
Very Nice Starrett 1-1/4" V-Blocks and Clamp No.271C with Original Box EDP 51295
USA 40103 Steel Step Blocks Set Up Hold Down Machinists Tooling
USA 40102 Steel Step Blocks Set Up Hold Down Machinists Tooling
HHIP 3900-3002 1/8 x 4" 10 Pair Precision Parallel Set
TAFT-PEIRCE 9131-M Precision Pair Of 2-3/4"x2-3/8"x1-7/
Steel V Block 1 1/2" X 1 1/2" X 2" With Sets Of Clamp Hardened & Ground ACTOOLS
VINTAGE GEORGE SCHERR MAGNETIC TRANSFER BLOCKS, 3-3/4 X 1-3/4 X 1, No Reserve!
ARMSTRONG #3 MACHINIST JACKS PAIR, No Reserve!
Starrett 567 V-Block & Clamp Machinist Tools CNC Milling Machine #567 #490
Large V-Block Heavy Duty Large Capacity V Block Machinist CNC #492
Vee Blocks 4" Matching Pair 100 xPair 75 x 56 x 31mm - Cast Iron V block Set New
TAFT-PEIRCE 9806-1M Precision Pair Of 2-1/2"x2-1/2"x1-3/
MACHINIST Threaded V-BLOCK - 4 1/8" No. 023 - Precision Ground - NICE
MACHINIST Threaded V-BLOCK - 5 1/4" No. VS-4 - Precision Ground - NICE
Multifaceted prism exemplary 0-330 degree (ETALON) Gr.1 VERY RARE USSR NOS
MACHINIST Threaded V-BLOCK - 6"x6"x3 3/4" - Precision Ground - Heavy Duty - NICE
People who viewed this item also vieved
MT1 MORSE TAPER #1 HALF NOTCH CENTER LATHE CNC TOOL & WORKHOLDING TURNING #A93
Skoda 3-CSN243324 #3MT Live Center
4 Inch South Bend 3 Jaw D1-3 Lathe Chuck
Machinist/Toolmakers Precision ALBRECHT CHUCK 0-1/8"/0-3mm w/ Jacobs 1/2" Arbor
HORTON Chuck 1/2" CAP. Pat 1908
Flanged Base Latch Clamp, Model 348D GIB
Merrill Steel Plate Clamp 3 ton Lifting 1/16" to 1" Plate
STS CNC CT-50 3/4" Stub Arbor Adapter Tool CV50SA075700
STS CNC CT50 20mm Shell Mill Adapter Tool CV50SM20MM700
KENNAMETAL DA100 COLLET CHUCK EXTENSION SS100 DA10 4731 STK1354
10 Pcs. Techniks CAT 50-ANSI-C x 45 Coolant Pull Studs for Matsura CNC Mill
59 Pcs. Techniks 3/32" to 1" x 64ths TG 100 Precision CNC Collet Set
43 Pcs. Techniks 1/8" to 3/4" x 64ths TG 75 Precision CNC Collet Set
Crimping Press quick release tool holder or Die Holder w adjustable top
Crimping Press double quick release tool holder or Die Holder
FIXTURE HARDENED/PRECISION GROUND STEEL 90 DEGREE FOR MILLING AND GRIDING
Airetool Tube Cleaner Expander Extension Hose + Free Expedited Shipping!!!
Airetool Tube Cleaner Expander 3316 Fitting + Free Expedited Shipping!!!
Lot of 4 Airetool Tube Cleaner Expander 32009 Fittings + Free Expedited Shipping
SMW ACCU SMART 35 CONTROL - Error showing-protected mode-- Make offer
SMW ACCU SMART 30 CONTROL - Error showing- Make offer
VERTEX ARTD-004 DIVIDING PLATE SET FOR 4" ROTARY TABLES-NEW!
Vintage 4" Wardsmaster (COLUMBIAN 504??) VISE Made In USA in good cond.
IRWIN RECORD 3" JAW CLAMP ON VICE, 2-1/2" CAPACITY, 1-1/2" DEPTH, 226303 LIFETIM
Kurt 4 Inch 4 Place Precision Machining Vice
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies