+ Post new Ad
Tap and Die Set in Russian Box, US $4300 – Picture 0
Tap and Die Set in Russian Box, US $4300 – Picture 1
Tap and Die Set in Russian Box, US $4300 – Picture 2
Tap and Die Set in Russian Box, US $4300 – Picture 3
Tap and Die Set in Russian Box, US $4300 – Picture 4
Tap and Die Set in Russian Box, US $4300 – Picture 5
Tap and Die Set in Russian Box, US $4300 – Picture 6
Tap and Die Set in Russian Box, US $4300 – Picture 7
Tap and Die Set in Russian Box, US $4300 – Picture 8
Tap and Die Set in Russian Box, US $4300 – Picture 0
Tap and Die Set in Russian Box, US $4300 – Picture 1
Tap and Die Set in Russian Box, US $4300 – Picture 2
Tap and Die Set in Russian Box, US $4300 – Picture 3
Tap and Die Set in Russian Box, US $4300 – Picture 4
Tap and Die Set in Russian Box, US $4300 – Picture 5
Tap and Die Set in Russian Box, US $4300 – Picture 6
Tap and Die Set in Russian Box, US $4300 – Picture 7
Tap and Die Set in Russian Box, US $4300 – Picture 8

Tap And Die Set In Russian Box

US $4300

  • San Carlos, California, United States
  • Jan 30th
Open on mobile:
QR code
This is a Tap and Die Set in a Russian Box. The box measures about 8 3/8 inches long X 4 1/8 inches wide X 1/2 inch deep, has some wear and scratching, and has Russian writing. There are 16 taps and all of them have some wear. There are 4 dies and they all also have wear and rust. The other 2 steel pieces have wear and rust as well. This Tap and Die set is sold as is, as found, and with no guarantee. All Packages WILL BE shipped with insurance on them equal to the value of the package!! No exceptions!! PLEASE NOTE THAT ALL INTERNATIONAL SALES WILL BE SHIPPED THROUGH USPS PRIORITY INTERNATIONAL. NO EXCEPTIONS!! DUE TO USPS RESTRICTIONS, NOT ALL COUNTRIES ARE ELIGIBLE FOR TRACKING. BECAUSE OF THIS I CANNOT GUARANTEE DELIVERY TO THOSE COUNTRIES. ALL BUYERS PLEASE WAIT FOR AN INVOICE BEFORE PAYING FOR YOUR ITEM! SHIPPING CHARGES MAY NOT BE EXACT!! IF YOU MAKE YOUR PAYMENT WITHOUT BEING SENT AN INVOICE, YOUR PAYMENT WILL BE CANCELLED AND A NEW INVOICE WILL BE SENT. THIS WAY I CAN MAKE SURE THAT YOU ARE PAYING THE CORRECT AMOUNT FOR SHIPPING!!  

Directions

Similar products from Tools for Drilling & Tapping Equipment

ISCAR INDEXABLE DRILL 1" SHANK 5.75" OAL DCM 0906 272 100A 3D (LOC1255B)

ISCAR INDEXABLE DRILL 1" SHANK 5.75" OAL DCM 0906 272 100A 3D (LOC1255B)

  • Laingsburg, Michigan, United States
  • Jan 30th
ISCAR INDEXABLE DRILL 1" SHANK 7.5" OAL DCM 0906 453 100A 5D (LOC1255B)

ISCAR INDEXABLE DRILL 1" SHANK 7.5" OAL DCM 0906 453 100A 5D (LOC1255B)

  • Laingsburg, Michigan, United States
  • Jan 30th
ISCAR INDEXABLE DRILL 1" SHANK 8" OAL DCM 0984 492 100A 5D (LOC1255B)

ISCAR INDEXABLE DRILL 1" SHANK 8" OAL DCM 0984 492 100A 5D (LOC1255B)

  • Laingsburg, Michigan, United States
  • Jan 30th
ISCAR INDEXABLE DRILL 1" SHANK 8" OAL DCM 0984 492 100A 5D (LOC1257B)

ISCAR INDEXABLE DRILL 1" SHANK 8" OAL DCM 0984 492 100A 5D (LOC1257B)

  • Laingsburg, Michigan, United States
  • Jan 30th
ISCAR INDEXABLE DRILL 1.25" SHANK 6.5" OAL DCN 0945 283 125A 3D (LOC1255B)

ISCAR INDEXABLE DRILL 1.25" SHANK 6.5" OAL DCN 0945 283 125A 3D (LOC1255B)

  • Laingsburg, Michigan, United States
  • Jan 30th
ISCAR INDEXABLE DRILL 5/8" SHANK 5.25" OAL DCM 0551 275 063A 5D (LOC1257B)

ISCAR INDEXABLE DRILL 5/8" SHANK 5.25" OAL DCM 0551 275 063A 5D (LOC1257B)

  • Laingsburg, Michigan, United States
  • Jan 30th
TIC BILZ TYPE 2 TAP ADAPTER 1/4" PIPE STK 1536

TIC BILZ TYPE 2 TAP ADAPTER 1/4" PIPE STK 1536

  • Wadley, Alabama, United States
  • Jan 30th
SANDVIK INDEXABLE DRILL 1" SHANK 4.5" OAL A880 D0750LX25 02 (LOC1257B)

SANDVIK INDEXABLE DRILL 1" SHANK 4.5" OAL A880 D0750LX25 02 (LOC1257B)

  • Laingsburg, Michigan, United States
  • Jan 30th
SECO INDEXABLE DRILL 1" SHANK 4.75" OAL SD502 18.5 37 25R7 (LOC1257B)

SECO INDEXABLE DRILL 1" SHANK 4.75" OAL SD502 18.5 37 25R7 (LOC1257B)

  • Laingsburg, Michigan, United States
  • Jan 30th
1 1/8-7 H4 Tap Metalworking Tool

1 1/8-7 H4 Tap Metalworking Tool

  • Greenfield, Tennessee, United States
  • Jan 30th
HELICOIL 6-32 PREWINDER 7551-06

HELICOIL 6-32 PREWINDER 7551-06

  • San Carlos, California, United States
  • Jan 30th
Starrett Tap Wrench Set Of 3 No. 93a 93b 93c

Starrett Tap Wrench Set Of 3 No. 93a 93b 93c

  • Hoffman Estates, Illinois, United States
  • Jan 30th
gtd no 6 tap wrench Machinist

gtd no 6 tap wrench Machinist

  • Hoffman Estates, Illinois, United States
  • Jan 30th
New Snap on 48 Pc. US/Metric Master Rethread Tap And Die Kit.

New Snap on 48 Pc. US/Metric Master Rethread Tap And Die Kit.

  • Fair Play, South Carolina, United States
  • Jan 30th
ARO Self Feed Drill Tapping Unit with Leroy Somer Motor, Tapmatic 50x Tap +more

ARO Self Feed Drill Tapping Unit with Leroy Somer Motor, Tapmatic 50x Tap +more

  • Kaukauna, Wisconsin, United States
  • Jan 30th
ARO Self Feed Drill Unit with Leroy Somer Motor, Jacobs Chuck 33BA +more

ARO Self Feed Drill Unit with Leroy Somer Motor, Jacobs Chuck 33BA +more

  • Kaukauna, Wisconsin, United States
  • Jan 30th
Delta NOS 14" Drill Press Table Bracket Assembly 2 3/4" Column -A-

Delta NOS 14" Drill Press Table Bracket Assembly 2 3/4" Column -A-

  • Long Beach, California, United States
  • Jan 30th
Delta NOS 14" Drill Press Table Bracket Assembly 2 3/4" Column -B-

Delta NOS 14" Drill Press Table Bracket Assembly 2 3/4" Column -B-

  • Long Beach, California, United States
  • Jan 30th
Delta Drill Press Table Bracket Scale, Good Used -A-

Delta Drill Press Table Bracket Scale, Good Used -A-

  • Long Beach, California, United States
  • Jan 30th
Delta Drill Press NOS Table Tilt Index Pin 1/4" Dia.

Delta Drill Press NOS Table Tilt Index Pin 1/4" Dia.

  • Long Beach, California, United States
  • Jan 30th

People who viewed this item also vieved

No. 22 Williams Cutting-Off & Side-Tool

No. 22 Williams Cutting-Off & Side-Tool

  • Brooksville, Florida, United States
  • Jan 30th
No. 1-R Turning Tool Holder w/ Wrench

No. 1-R Turning Tool Holder w/ Wrench

  • Brooksville, Florida, United States
  • Jan 30th
N-31-R Williams Cutting-Off & Side Tool w/ Wrench

N-31-R Williams Cutting-Off & Side Tool w/ Wrench

  • Brooksville, Florida, United States
  • Jan 30th
RADSTAR MILLING CUTTER 1.25" SHANK RH 1.750 4.0 1.250 K03 (LOC1259B)

RADSTAR MILLING CUTTER 1.25" SHANK RH 1.750 4.0 1.250 K03 (LOC1259B)

  • Laingsburg, Michigan, United States
  • Jan 30th
PRECISION COMPONENTS NMTB 50 1.5" END MILL HOLDER NMTB 50 1.500 6 (LOC1261A)

PRECISION COMPONENTS NMTB 50 1.5" END MILL HOLDER NMTB 50 1.500 6 (LOC1261A)

  • Laingsburg, Michigan, United States
  • Jan 30th
POLAND NMTB 40 1" MILLING ARBOR 41B3 (LOC1259B)

POLAND NMTB 40 1" MILLING ARBOR 41B3 (LOC1259B)

  • Laingsburg, Michigan, United States
  • Jan 30th
42" x 120" Mattison Horizontal Surface Grinder

42" x 120" Mattison Horizontal Surface Grinder

  • Youngstown, Ohio, United States
  • Feb 14th
Brown And Sharpe 760 Permanent Magentic Block, 5" x 2 1/2" x 2 1/4" USA Magnet

Brown And Sharpe 760 Permanent Magentic Block, 5" x 2 1/2" x 2 1/4" USA Magnet

  • Livonia, Michigan, United States
  • Feb 15th
RADIUS DRESSING ATTACHMENT FOR THE UNI-GRIND GRINDING FIXTURE KEN MAC

RADIUS DRESSING ATTACHMENT FOR THE UNI-GRIND GRINDING FIXTURE KEN MAC

  • Ellington, New York, United States
  • Feb 15th
Easy Edger - Flanger Hand Flanger Create edge up to 20 g sheet metal

Easy Edger - Flanger Hand Flanger Create edge up to 20 g sheet metal

  • Glenoma, Washington, United States
  • Feb 17th
Vintage 1/2 Handi-Mike Micrometer

Vintage 1/2 Handi-Mike Micrometer

  • Clifton, New Jersey, United States
  • Feb 17th
Vintage Simplex Templeton Kenly & Co. Salesman Sample Hydraulic Jack

Vintage Simplex Templeton Kenly & Co. Salesman Sample Hydraulic Jack

  • Candler, North Carolina, United States
  • Feb 17th
2001, CNC Turret Punch Press with automatic loader/unloader

2001, CNC Turret Punch Press with automatic loader/unloader

  • United States
  • Feb 22nd
1995 CNC Turret Punch Press, Fanuc OP , with auto loader/unloader

1995 CNC Turret Punch Press, Fanuc OP , with auto loader/unloader

  • United States
  • Feb 22nd
Tube Roller Dies, 1 1/4" Tube Roller Dies, Steel Dies Made In The USA.

Tube Roller Dies, 1 1/4" Tube Roller Dies, Steel Dies Made In The USA.

  • United States
  • Feb 22nd
SUNNEN HONE MANDREL WITH ADAPTER K20-650AH 7K STK 2200

SUNNEN HONE MANDREL WITH ADAPTER K20-650AH 7K STK 2200

  • Wadley, Alabama, United States
  • Feb 24th
SUNNEN HONE MANDREL WITH ADAPTER K10-339AH IB STK 2198

SUNNEN HONE MANDREL WITH ADAPTER K10-339AH IB STK 2198

  • Wadley, Alabama, United States
  • Feb 24th
SUNNEN HONE MANDREL WITH ADAPTER K10-323AS STK 2197

SUNNEN HONE MANDREL WITH ADAPTER K10-323AS STK 2197

  • Wadley, Alabama, United States
  • Feb 24th
COMPLETE SOMMA SHAVE TOOL HOLDER FOR DAVENPORT HIGH PRESSURE

COMPLETE SOMMA SHAVE TOOL HOLDER FOR DAVENPORT HIGH PRESSURE

  • San Antonio, Texas, United States
  • Mar 4th
ACME RPM/FEED GEARS - RPM 76 TEETH/FEED 100 TEETH -FOR ACME 1 1/4"

ACME RPM/FEED GEARS - RPM 76 TEETH/FEED 100 TEETH -FOR ACME 1 1/4"

  • Melrose Park, Illinois, United States
  • Mar 4th
ACME-GRIDLEY RPM/FEED GEAR 96 TEETH SET - FOR 1 5/8 OR 2" ACMES

ACME-GRIDLEY RPM/FEED GEAR 96 TEETH SET - FOR 1 5/8 OR 2" ACMES

  • Melrose Park, Illinois, United States
  • Mar 4th
EDM Graphite for Sale

EDM Graphite for Sale

  • Schaumburg, Illinois, United States
  • Mar 26th
50 Amp XLO Lectra Form EDM Machine, Model 255, Nice

50 Amp XLO Lectra Form EDM Machine, Model 255, Nice

  • Somerville, New Jersey, United States
  • Mar 26th
25 Amp XLO Lectra Form EDM Machine, Model 251, Nicec

25 Amp XLO Lectra Form EDM Machine, Model 251, Nicec

  • Somerville, New Jersey, United States
  • Mar 26th
MAX mfg Cold Saw 15 HP 20 in

MAX mfg Cold Saw 15 HP 20 in

  • Seattle, Washington, United States
  • May 14th
8" Roll-In Model EF- 1459 Vertical Band Saw, S/N 03046- EF

8" Roll-In Model EF- 1459 Vertical Band Saw, S/N 03046- EF

  • Painesville, Ohio, United States
  • May 14th
22" X 22" HYD-MECH Horizontal Band Saw

22" X 22" HYD-MECH Horizontal Band Saw

  • Kansas City, Missouri, United States
  • May 14th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies