+ Post new Ad
TAP EXTENSION FOR 1/2" TAP x 4" OVERALL LENGTH 3/4" BODY DIA .590" SH NEW $18.00, US $18.00 – Picture 0
TAP EXTENSION FOR 1/2" TAP x 4" OVERALL LENGTH 3/4" BODY DIA .590" SH NEW $18.00, US $18.00 – Picture 1
TAP EXTENSION FOR 1/2" TAP x 4" OVERALL LENGTH 3/4" BODY DIA .590" SH NEW $18.00, US $18.00 – Picture 2
TAP EXTENSION FOR 1/2" TAP x 4" OVERALL LENGTH 3/4" BODY DIA .590" SH NEW $18.00, US $18.00 – Picture 3
TAP EXTENSION FOR 1/2" TAP x 4" OVERALL LENGTH 3/4" BODY DIA .590" SH NEW $18.00, US $18.00 – Picture 0
TAP EXTENSION FOR 1/2" TAP x 4" OVERALL LENGTH 3/4" BODY DIA .590" SH NEW $18.00, US $18.00 – Picture 1
TAP EXTENSION FOR 1/2" TAP x 4" OVERALL LENGTH 3/4" BODY DIA .590" SH NEW $18.00, US $18.00 – Picture 2
TAP EXTENSION FOR 1/2" TAP x 4" OVERALL LENGTH 3/4" BODY DIA .590" SH NEW $18.00, US $18.00 – Picture 3

Tap Extension For 1/2" Tap X 4" Overall Length 3/4" Body Dia .590" Sh New $18.00

US $18.00

  • North Tonawanda, New York, United States
  • May 10th
Open on mobile:
QR code
EXTENSION CONDITION = NEW MANUFACTURER = NOTE:  THIS ITEM HAS BEEN IN THE WAREHOUSE AND MAY HAVE SOME SURFACE RUST IN SPOTS, (VERY MINIMAL)  BUT IT HAS NEVER BEEN USED.  ALSO THERE IS A SPOT FOR {2} SET SCREWS  WHICH ARE NOT IN EXTENSION     TAP  NOT INCLUDED WILL HOLD ANY 1/2" DIAMETER TAP OUTSIDE BODY DIAMETER  = 3/4" (.750") SHANK DIAMETER = .590"     SHANK LENGTH = 2" EXTENSION OVERALL LENGTH = 4" SQUARE SIZE ON EXTENSION = .440"  THERE IS A THRU HOLE FROM THE BACKSIDE OR BOTTOM OF THE SHANK,  IT RUNS ALL THE WAY THRU TO THE TOP OF EXTENSION WHICH MAY USEFUL IF YOU RUN A COOLANT THROUGH TAP.  HARDENED AND GROUND YOUR COST  $18.00 P/N NB-75 -B15560 1R02   LOCATION = SHELF 66 VISIT OUT OUR E-BAY STORE FOR OTHERS DEALS NOTE:   WE ALWAYS COMBINE ITEMS TO BE SHIPPED AND ALWAYS ISSUE IMMEDIATE REFUNDS TO BUYER(S) WHO OVERPAY FREIGHT COSTS WHEN SHIPPING YOUR ORDER.  THANKS FOR ALL YOUR SUPPORT Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
“ITEM HAS BEEN OUT IN WAREHOUSE AND HAS SOME SURFACE RUST SET SCREWS {2} ARE OUT OUT BODY”
Manufacturer KENNAMETAL
Model TAP EXTENSION
Country/Region of Manufacture United States
MPN B155601R02
Brand Kennametal

Directions

Similar products from Prolongation Tools

DA200 COLLET EXTENSION WITH 3/4" DIA. SHANK & (4) DA 200 COLLETS LOT C12696

DA200 COLLET EXTENSION WITH 3/4" DIA. SHANK & (4) DA 200 COLLETS LOT C12696

  • Dayton, Ohio, United States
  • May 17th
DA200 COLLET EXTENSION WITH 3/4" DIA. SHANK & (4) DA 200 COLLETS LOT C12695

DA200 COLLET EXTENSION WITH 3/4" DIA. SHANK & (4) DA 200 COLLETS LOT C12695

  • Dayton, Ohio, United States
  • May 16th
Erickson # SS075DA204469 111421326E2CV Collet Chuck

Erickson # SS075DA204469 111421326E2CV Collet Chuck

  • Henderson, Nevada, United States
  • May 14th
WALDEN 8" EXTENSION 3/4" SHANK

WALDEN 8" EXTENSION 3/4" SHANK

  • Bethlehem, Connecticut, United States
  • May 14th
VTG. USA MADE RATCHET SOCKET TOOL REVERSIBLE DRIVER VGC 4" LONG PAT. 2989881

VTG. USA MADE RATCHET SOCKET TOOL REVERSIBLE DRIVER VGC 4" LONG PAT. 2989881

  • Oak Lawn, Illinois, United States
  • May 13th
KENNAMETAL COLLET CHUCK EXTENDER SS075DA04712

KENNAMETAL COLLET CHUCK EXTENDER SS075DA04712

  • Hudson, New Hampshire, United States
  • May 13th
2.5 In. OD Teflon Rod

2.5 In. OD Teflon Rod

  • Lafayette, Louisiana, United States
  • May 12th
1M Length OD 6mm ID 4mm PTFE TEFLON Tubing Tube Pipe hose per meter

1M Length OD 6mm ID 4mm PTFE TEFLON Tubing Tube Pipe hose per meter

  • HONG KONG , Hong Kong
  • May 12th
DA180 COLLET EXTENSION 1-3/4" DIA. SHANK & (4) DA 180 COLLETS LOT C12437

DA180 COLLET EXTENSION 1-3/4" DIA. SHANK & (4) DA 180 COLLETS LOT C12437

  • Dayton, Ohio, United States
  • May 12th
DA200 COLLET CHUCK EXTENSION 3/4 x 7 inch

DA200 COLLET CHUCK EXTENSION 3/4 x 7 inch

  • Carson City, Nevada, United States
  • May 11th
UNIVERSAL ENG. XZ COLLET EXTENSION 1-3/4" DIA SHANK & (7) XZ COLLETS LOT C12450

UNIVERSAL ENG. XZ COLLET EXTENSION 1-3/4" DIA SHANK & (7) XZ COLLETS LOT C12450

  • Dayton, Ohio, United States
  • May 10th
SANDVIK VARILOCK EXTENSION QTY1 391 01 50 50 060 (LOC1664)

SANDVIK VARILOCK EXTENSION QTY1 391 01 50 50 060 (LOC1664)

  • Laingsburg, Michigan, United States
  • May 9th
KENNAMETAL DA400 COLLET EXTENSION 1-3/4" DIA SHANK (4) DA 400 COLLETS LOT C12305

KENNAMETAL DA400 COLLET EXTENSION 1-3/4" DIA SHANK (4) DA 400 COLLETS LOT C12305

  • Dayton, Ohio, United States
  • May 9th
DA100 COLLET EXTENSION WITH 1" DIA. SHANK & (5) DA 100 COLLETS LOT C12561

DA100 COLLET EXTENSION WITH 1" DIA. SHANK & (5) DA 100 COLLETS LOT C12561

  • Dayton, Ohio, United States
  • May 8th
DA100 COLLET EXTENSION WITH 1" DIA. SHANK & (5) DA 100 COLLETS LOT C12560

DA100 COLLET EXTENSION WITH 1" DIA. SHANK & (5) DA 100 COLLETS LOT C12560

  • Dayton, Ohio, United States
  • May 8th
KENNAMETAL DA400 COLLET EXTENSION 1-3/4" DIA SHANK (4) DA 400 COLLETS LOT C12315

KENNAMETAL DA400 COLLET EXTENSION 1-3/4" DIA SHANK (4) DA 400 COLLETS LOT C12315

  • Dayton, Ohio, United States
  • May 7th
KENNAMETAL DA400 COLLET EXTENSION 1-3/4" DIA SHANK (4) DA 400 COLLETS LOT C12310

KENNAMETAL DA400 COLLET EXTENSION 1-3/4" DIA SHANK (4) DA 400 COLLETS LOT C12310

  • Dayton, Ohio, United States
  • May 7th
KENNAMETAL DA400 COLLET EXTENSION 1-3/4" DIA SHANK (4) DA 400 COLLETS LOT C12302

KENNAMETAL DA400 COLLET EXTENSION 1-3/4" DIA SHANK (4) DA 400 COLLETS LOT C12302

  • Dayton, Ohio, United States
  • May 6th
KENNAMETAL DA400 COLLET EXTENSION 1-3/4" DIA SHANK (4) DA 400 COLLETS LOT C12309

KENNAMETAL DA400 COLLET EXTENSION 1-3/4" DIA SHANK (4) DA 400 COLLETS LOT C12309

  • Dayton, Ohio, United States
  • May 6th
KENNAMETAL DA400 COLLET EXTENSION 1-3/4" DIA SHANK (4) DA 400 COLLETS LOT C12303

KENNAMETAL DA400 COLLET EXTENSION 1-3/4" DIA SHANK (4) DA 400 COLLETS LOT C12303

  • Dayton, Ohio, United States
  • May 6th

People who viewed this item also vieved

Cincinnati 40NSE9 No.9 B&S Taper Adapter NMTB40 Taper

Cincinnati 40NSE9 No.9 B&S Taper Adapter NMTB40 Taper

  • Chicago, Illinois, United States
  • Jan 30th
Cat40 Retention Knob Pull Lengthening Stub

Cat40 Retention Knob Pull Lengthening Stub

  • Byron, Georgia, United States
  • Jan 30th
VALENITE BB-3D VARI SET BOARING HEAD

VALENITE BB-3D VARI SET BOARING HEAD

  • Oxford, New Jersey, United States
  • Feb 15th
Boring mill drill holder

Boring mill drill holder

  • Sterling Heights, Michigan, United States
  • Feb 15th
Sandvik RF123E08-1616B – External Parting/Grooving Tool Holder

Sandvik RF123E08-1616B – External Parting/Grooving Tool Holder

  • Denizli,,, Turkey
  • Feb 23rd
Sandvik 266RKF-16-16 CoroThread 266 – Internal threading boring bars

Sandvik 266RKF-16-16 CoroThread 266 – Internal threading boring bars

  • Denizli,,, Turkey
  • Feb 23rd
#30 NMTB X 1-1/2 Inch Shell End Mill Holder

#30 NMTB X 1-1/2 Inch Shell End Mill Holder

  • Chino, California, United States
  • Feb 25th
SANDVIK COROMANT CAPTO END MILL ADAPTER C6-391.20-12 060

SANDVIK COROMANT CAPTO END MILL ADAPTER C6-391.20-12 060

  • Athens, Pennsylvania, United States
  • Feb 25th
Maska #SFx1-15/16 QD Bushing, 1/2" x 1/4" Keyseat, 1-15/16" Bore ~ (Off6B)

Maska #SFx1-15/16 QD Bushing, 1/2" x 1/4" Keyseat, 1-15/16" Bore ~ (Off6B)

  • Saint Louis, Missouri, United States
  • Feb 26th
2- STANDOFF STAINLESS STELL 5/8"OD. 3-7/16" LONG, 6 STEEL BUSHINGS 1-1/16" LONG

2- STANDOFF STAINLESS STELL 5/8"OD. 3-7/16" LONG, 6 STEEL BUSHINGS 1-1/16" LONG

  • Glasgow, Kentucky, United States
  • Feb 26th
Schunk SDF SVL-150-20 D12 Tendo Hydraulic Tool Extension 0206304 NEW

Schunk SDF SVL-150-20 D12 Tendo Hydraulic Tool Extension 0206304 NEW

  • Florence, Alabama, United States
  • Feb 27th
Sandvik 431-820100R205-3 Spacer,3.15" x 1-1/2" x .400" long

Sandvik 431-820100R205-3 Spacer,3.15" x 1-1/2" x .400" long

  • Lebanon, Tennessee, United States
  • Feb 27th
NEW CAT40 CAT 40 1" x 1.5 End Mill Tool Holder V Flange

NEW CAT40 CAT 40 1" x 1.5 End Mill Tool Holder V Flange

  • Portland, Oregon, United States
  • Mar 2nd
NEW CNC G BT40-EM5/8-2.50-B BT40 BT 40 5/8" x 2.5 End Mill Tool Holder V Flange

NEW CNC G BT40-EM5/8-2.50-B BT40 BT 40 5/8" x 2.5 End Mill Tool Holder V Flange

  • Portland, Oregon, United States
  • Mar 2nd
Lenox 1771984 Lenox Bi-Metal Hole Saw-2-3/8" HOLE SAW

Lenox 1771984 Lenox Bi-Metal Hole Saw-2-3/8" HOLE SAW

  • Brooklyn, New York, United States
  • Mar 25th
Jacobs Model 11N 3/8" x 2JT Super Ball Bearing Keyed Drill Chuck- TIR .003"

Jacobs Model 11N 3/8" x 2JT Super Ball Bearing Keyed Drill Chuck- TIR .003"

  • Hamden, Connecticut, United States
  • Mar 25th
SET ERICKSON 2 DA180 NMTB 30 QUICK CHANGE COLLET CHUCKS & 4 DA180 COLLETS C12794

SET ERICKSON 2 DA180 NMTB 30 QUICK CHANGE COLLET CHUCKS & 4 DA180 COLLETS C12794

  • Dayton, Ohio, United States
  • May 20th
LA/FL Quick knurling tool 15/64 x 15/64

LA/FL Quick knurling tool 15/64 x 15/64

  • East Northport, New York, United States
  • May 21st
Whitnon High Speed Milling Spindle 12,000 RPM (441-0030-000)

Whitnon High Speed Milling Spindle 12,000 RPM (441-0030-000)

  • Fort Worth, Texas, United States
  • May 26th
Wolfgang Engineering CNC Router Spindle. WW-650? (Shapeoko, Taig, Sherline )

Wolfgang Engineering CNC Router Spindle. WW-650? (Shapeoko, Taig, Sherline )

  • Crossville, Tennessee, United States
  • May 28th
Sunnen CR 1900 Connecting Rod Reconditioning Mandrel: Wedges, NIB Shoes Stone

Sunnen CR 1900 Connecting Rod Reconditioning Mandrel: Wedges, NIB Shoes Stone

  • Scottsdale, Arizona, United States
  • May 28th
Sunnen CR 2100 Connecting Rod Reconditioning Mandrel: Wedges, NIB Shoes Stone

Sunnen CR 2100 Connecting Rod Reconditioning Mandrel: Wedges, NIB Shoes Stone

  • Scottsdale, Arizona, United States
  • May 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies