Taprite 742hpn High Pressure Dual Gauge Primary Draft Beer N2 Nitrogen Regulator

US $557

Los Angeles, California, United States
May 26th

Open on mobile:
QR code

Taprite 742HPN 0-50 PSI Pressure Gauge, 1-Product/1-Pressure Co2 Regulator One (1) 0-3000 PSI Volumetric Gauge, One (1) 0-60 PSI Outlet Pressure Gauge CGA580 Inlet, 5/16" Barb Shut-off Outlet w/ Duck-Bill Check, Grey Cap, Tank Mount Built-In Safety - A non-adjustable, precision, relief valve in every Taprite Regulator that cannot be removed or easily circumvented. Fail-Safe protection – In case of regulator failure the Integral Safety will instantly activate to protect system from over pressurization. Excess pressure is vented into atmosphere. Keg Security – Pressure in Keg can never exceed preset level of 55-60 psig prior to shutdown. After shutoff no additional pressure enters the system. Left-Hand Threads–High pressure ports (only) have left hand threads to prevent possible use as a low-pressure outlet. Non-removable Adjusting Screw with lock nut designed so if turned all the way in, pressure entering system stays at safe level. Nitrogen is widely used in the beer industry but also has been used for dispensing wine. Inlet: CGA580 Nitrogen tank Fitting w/ Nut Outlet: 5/16" Barb Shut-off w/ Duck-Bill Check Gauges: 60# & 3000# Safety Blow-Off: 60 ± 5 PSI Working Pressure: 0-50 PSI Bonnet: Zinc, Black Taprite regulators are built and tested in accordance with UL Standard 252 for compressed gas regulators and UL 252A for compressed gas regulator accessories. All Taprite regulator components and accessories are inspected in accordance with the requirements of MIL-STD-105E. High Co2 volumetric flow provides continuity in product dispensing. Polycarbonate bonnet will not chip, break, or fade. Built-in 10 Micron Filter keeps contaminants out of the regulator. The same repair kit is used for primary and secondary regulators