+ Post new Ad
Techne Graham Extrusion Blow Molder Model 500S, US $57,500.00 – Picture 0
Techne Graham Extrusion Blow Molder Model 500S, US $57,500.00 – Picture 1
Techne Graham Extrusion Blow Molder Model 500S, US $57,500.00 – Picture 2
Techne Graham Extrusion Blow Molder Model 500S, US $57,500.00 – Picture 3
Techne Graham Extrusion Blow Molder Model 500S, US $57,500.00 – Picture 4
Techne Graham Extrusion Blow Molder Model 500S, US $57,500.00 – Picture 5
Techne Graham Extrusion Blow Molder Model 500S, US $57,500.00 – Picture 6
Techne Graham Extrusion Blow Molder Model 500S, US $57,500.00 – Picture 7
Techne Graham Extrusion Blow Molder Model 500S, US $57,500.00 – Picture 0
Techne Graham Extrusion Blow Molder Model 500S, US $57,500.00 – Picture 1
Techne Graham Extrusion Blow Molder Model 500S, US $57,500.00 – Picture 2
Techne Graham Extrusion Blow Molder Model 500S, US $57,500.00 – Picture 3
Techne Graham Extrusion Blow Molder Model 500S, US $57,500.00 – Picture 4
Techne Graham Extrusion Blow Molder Model 500S, US $57,500.00 – Picture 5
Techne Graham Extrusion Blow Molder Model 500S, US $57,500.00 – Picture 6
Techne Graham Extrusion Blow Molder Model 500S, US $57,500.00 – Picture 7

Techne Graham Extrusion Blow Molder Model 500s

US $57,500.00

  • Hialeah, Florida, United States
  • Jan 30th
Open on mobile:
QR code
A 1994 Techne graham extrusion blow molder model 500S Serial 19100-94. This machine has been thoroughly looked over by our tech and put to power and ran a dry cycle which can be viewed on line at youtube.Specs: 4 Head with 80 mm centers Contineus  extrusion In machine de-flasher  Dry cycle time: 1.8 Secs Clamping force : 90 KN weight: 6000 kg Screw speed:  Min 25 RPM / Max 100 RPM Extruder capacity : 70 Kg/H
Condition:
Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. ...
Brand Techne
MPN 500S
Model 500S

Directions

Similar products from IBM Processing

PROHEAT 4188-297 Band Heater 1000W 480V 7-3/4" ID 1-1/2" Length NEW

PROHEAT 4188-297 Band Heater 1000W 480V 7-3/4" ID 1-1/2" Length NEW

  • Wilmington, Ohio, United States
  • Jan 30th
Big Chief 96-58-2073 Band Heater 3000W 240/480V 8-1/2" ID 3" Long NEW

Big Chief 96-58-2073 Band Heater 3000W 240/480V 8-1/2" ID 3" Long NEW

  • Wilmington, Ohio, United States
  • Jan 30th
Cal Rod Heater Tie Bar Heater Restraining Rod HEater injection molding

Cal Rod Heater Tie Bar Heater Restraining Rod HEater injection molding

  • Rhoadesville, Virginia, United States
  • Jan 30th
76 Ton Vertical Newbury Injection Molding Machine Model V6-76RS

76 Ton Vertical Newbury Injection Molding Machine Model V6-76RS

  • Hialeah, Florida, United States
  • Jan 30th
Aluminum Water Manifold - 1" Inlet with (6) 1/4" ports.

Aluminum Water Manifold - 1" Inlet with (6) 1/4" ports.

  • Shrewsbury, Massachusetts, United States
  • Jan 30th
Aluminum Manifold Pair - 1" Inlet, (8) 1/4" ports with mini shut-off valves

Aluminum Manifold Pair - 1" Inlet, (8) 1/4" ports with mini shut-off valves

  • Shrewsbury, Massachusetts, United States
  • Jan 30th
Aluminum Water Manifold - 1" Inlet with (8) 1/4" ports.

Aluminum Water Manifold - 1" Inlet with (8) 1/4" ports.

  • Shrewsbury, Massachusetts, United States
  • Jan 30th
Aluminum Water Manifold Assembly - 1.5" Inlet with (20) 1/2" ports.

Aluminum Water Manifold Assembly - 1.5" Inlet with (20) 1/2" ports.

  • Shrewsbury, Massachusetts, United States
  • Jan 30th
Aluminum Water Manifold - 1.5" Inlet with (8) 1/2" ports.

Aluminum Water Manifold - 1.5" Inlet with (8) 1/2" ports.

  • Shrewsbury, Massachusetts, United States
  • Jan 30th
18 oz Reed Injection unit

18 oz Reed Injection unit

  • Hialeah, Florida, United States
  • Jan 30th
Van Dorn Pathfinder Master Cartridge Controller Process Module Inj Molding~

Van Dorn Pathfinder Master Cartridge Controller Process Module Inj Molding~

  • Forest City, North Carolina, United States
  • Jan 30th
NEW CONVECTRONICS AIRHEATER 001-10009T ...................WL-68

NEW CONVECTRONICS AIRHEATER 001-10009T ...................WL-68

  • Norfolk, Virginia, United States
  • Jan 30th
New Wire Mesh Belt RLC Type W=200MM 200MM WD

New Wire Mesh Belt RLC Type W=200MM 200MM WD

  • Hamilton, Ohio, United States
  • Jan 30th
Custom Injection Molding.... Time Available... 15T to 200T <1oz to 16oz

Custom Injection Molding.... Time Available... 15T to 200T <1oz to 16oz

  • Painesville, Ohio, United States
  • Jan 30th
Wittmann DFR-101:Z1 Water distributor 4 circuits Ferromatik injection molding

Wittmann DFR-101:Z1 Water distributor 4 circuits Ferromatik injection molding

  • Shanghai, China
  • Jan 30th
Arburg 270-210-500 Allrounder Injection Moulding Molding Machine Press

Arburg 270-210-500 Allrounder Injection Moulding Molding Machine Press

  • Phoenix, Arizona, United States
  • Jan 30th
Hesta B40 Blow Molders

Hesta B40 Blow Molders

  • Miami, Florida, United States
  • Jan 30th
Hesta B50 Blow Molding Machines

Hesta B50 Blow Molding Machines

  • Miami, Florida, United States
  • Jan 30th
IPC, ECHO Serries Insert Injection Molding Machine

IPC, ECHO Serries Insert Injection Molding Machine

  • Bicknell, Indiana, United States
  • Jan 30th
8 Cavity Blow Molding Machine for 20 oz Sports Bottles - Less than 2 Years Old

8 Cavity Blow Molding Machine for 20 oz Sports Bottles - Less than 2 Years Old

  • Miami, Florida, United States
  • Jan 30th

People who viewed this item also vieved

Used- Davis Electric 18&#034; Payoff, Model MPO-18. Includes dancer and foot pedal jo

Used- Davis Electric 18" Payoff, Model MPO-18. Includes dancer and foot pedal jo

  • Bensenville, Illinois, United States
  • Jun 7th
Used- Davis Standard Versa Puller/Cutter, Model Mini Cutter II. Approximate 5/8&#034;

Used- Davis Standard Versa Puller/Cutter, Model Mini Cutter II. Approximate 5/8"

  • Bensenville, Illinois, United States
  • Jun 7th
Used- Versa Machinery Puller/Cutter, Model DAC 61. Maximum cut capacity 1/2&#034; OD.

Used- Versa Machinery Puller/Cutter, Model DAC 61. Maximum cut capacity 1/2" OD.

  • Bensenville, Illinois, United States
  • Jun 7th
Used- Killian 1.25&#034; Single Screw Extruder. Approximate 24 to 1 L/D ratio, electr

Used- Killian 1.25" Single Screw Extruder. Approximate 24 to 1 L/D ratio, electr

  • Bensenville, Illinois, United States
  • Jun 7th
Used- Goodman Stand-Alone Puller, Model 4F. (2) 4&#034; Wide x 30&#034; long belts. Driven

Used- Goodman Stand-Alone Puller, Model 4F. (2) 4" Wide x 30" long belts. Driven

  • Bensenville, Illinois, United States
  • Jun 7th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies