+ Post new Ad
Techniks CAT 40 ER 32 25K Dual Drive CNC Collet Chuck-BIG Plus, BIG Daishowa, US $360 – Picture 0
Techniks CAT 40 ER 32 25K Dual Drive CNC Collet Chuck-BIG Plus, BIG Daishowa, US $360 – Picture 0

Techniks Cat 40 Er 32 25k Dual Drive Cnc Collet Chuck-big Plus, Big Daishowa

US $360

  • Hamden, Connecticut, United States
  • Jan 30th
Open on mobile:
QR code
1 Pc. Techniks Brand New CAT 40 ER 32 x 2.76" 25K RMP @ G2.5 Balanced High Speed CoolFlex (DIN B Enabled) Dual Drive Collet Chuck for Big Plus & Standard CNC Mill Techniks Collet Chuck Advantages Better rigidity and reduced vibration Improved performance at high metal removal rates and when machining at extended lengths Provides the benefits of dual-contact machining on standard spindles too! Increase feed rates up to 20% Extend tool life and reduce scrap CoolFLEX DIN B coolant feature on ER Collet Chucks and Shrink-Fit tool holders CoolFLEX Tool Holders CoolFLEX holders are factory set for coolant-thru spindle. Simply remove stop screws (2) for DIN B coolant. Holder includes our Power Coat nut that holds 75% tighter than standard ER nuts, to provide better T.I.R. and extended cutting tool life. NOTE: ER 16 and 20 tool holders come with hex nut as standard. For slotted nuts simply add SLOTNUT to the end of the part number. For holders with coolant nut included, add -C to the part number CAT 40, ER DualDrive Collet Chucks Part#
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Techniks
Coolant Type CoolFlex (DIN B)
Tool Type Collet Chucks
Contact Type Dual Drive (Big Plus CNC Mill)
Shank/Taper Type CAT 40
Category CNC Mill,Workholding,Toolholding
Collet Series ER 32
Industry Aerospace,Metal-Working & Manufacturing
Collet Capacity 1/16" to 3/4" x 32nds & 3mm to 20mm x 1mm

Directions

Similar products from CT Tapers & Holders

RICHMILL 1/4" & 3/8" ENDMILL TOOL HOLDERS w/ CAT40 SHANKS

RICHMILL 1/4" & 3/8" ENDMILL TOOL HOLDERS w/ CAT40 SHANKS

  • Covina, California, United States
  • Jan 30th
RICHMILL 3/16" & TECHNIKS 3/8" ENDMILL TOOL HOLDERS w/ CAT40 SHANKS

RICHMILL 3/16" & TECHNIKS 3/8" ENDMILL TOOL HOLDERS w/ CAT40 SHANKS

  • Covina, California, United States
  • Jan 30th
TECHNIKS 3/4" & GS 1" ENDMILL TOOL HOLDERS w/ CAT40 SHANKS

TECHNIKS 3/4" & GS 1" ENDMILL TOOL HOLDERS w/ CAT40 SHANKS

  • Covina, California, United States
  • Jan 30th
TECHNIKS 1/4" & 3/8" ENDMILL TOOL HOLDERS w/ CAT40 SHANKS

TECHNIKS 1/4" & 3/8" ENDMILL TOOL HOLDERS w/ CAT40 SHANKS

  • Covina, California, United States
  • Jan 30th
GS 1/4" & 1" ENDMILL TOOL HOLDERS w/ CAT40 SHANKS

GS 1/4" & 1" ENDMILL TOOL HOLDERS w/ CAT40 SHANKS

  • Covina, California, United States
  • Jan 30th
TECHNIKS 1/4" & CARBOLOY 3/4" ENDMILL TOOL HOLDERS w/ CAT40 SHANKS

TECHNIKS 1/4" & CARBOLOY 3/4" ENDMILL TOOL HOLDERS w/ CAT40 SHANKS

  • Covina, California, United States
  • Jan 30th
CAT 45 - CV 45 - BORING HEAD HOLDER - COMMAND - C5H4-1420 - GREAT CONDITION

CAT 45 - CV 45 - BORING HEAD HOLDER - COMMAND - C5H4-1420 - GREAT CONDITION

  • Ashland, Wisconsin, United States
  • Jan 30th
CAT 45 - CV 45 - ENDMILL HOLDER - 2" BORE - COMMAND C5E4-2000 - GREAT CONDITION

CAT 45 - CV 45 - ENDMILL HOLDER - 2" BORE - COMMAND C5E4-2000 - GREAT CONDITION

  • Ashland, Wisconsin, United States
  • Jan 30th
CAT 45 - CV 45 - BORING HEAD HOLDER - CRITERION - CB2-CV45 - GREAT CONDITION

CAT 45 - CV 45 - BORING HEAD HOLDER - CRITERION - CB2-CV45 - GREAT CONDITION

  • Ashland, Wisconsin, United States
  • Jan 30th
CAT 45 - CV 45 - BORING HEAD HOLDER - PRECISE CORP. - 327299 - GREAT CONDITION

CAT 45 - CV 45 - BORING HEAD HOLDER - PRECISE CORP. - 327299 - GREAT CONDITION

  • Ashland, Wisconsin, United States
  • Jan 30th
6 Pc Techniks CAT 40 10K RPM Balanced Stubby CNC End Mill Holders Kit

6 Pc Techniks CAT 40 10K RPM Balanced Stubby CNC End Mill Holders Kit

  • Hamden, Connecticut, United States
  • Jan 30th
BALAS 40MM-VF-SM8 40 TAPER CNC TOOL HOLDER 1" CAP SAW / FACE MILL ARBOR

BALAS 40MM-VF-SM8 40 TAPER CNC TOOL HOLDER 1" CAP SAW / FACE MILL ARBOR

  • La Puente, California, United States
  • Jan 30th
ERICKSON 40 TAPER CNC TOOL HOLDER 2 MT MORSE TAPER ADAPTER

ERICKSON 40 TAPER CNC TOOL HOLDER 2 MT MORSE TAPER ADAPTER

  • La Puente, California, United States
  • Jan 30th
40 TAPER CNC SHELL MILLING CUTTER 1-1/2" CAPACITY ARBOR w/ 3-7/8" CUTTER

40 TAPER CNC SHELL MILLING CUTTER 1-1/2" CAPACITY ARBOR w/ 3-7/8" CUTTER

  • La Puente, California, United States
  • Jan 30th
40 TAPER CNC FACE MILLING CUTTER ARBOR w/ 6" DIAMETER NELCO TOOL CO SAW

40 TAPER CNC FACE MILLING CUTTER ARBOR w/ 6" DIAMETER NELCO TOOL CO SAW

  • La Puente, California, United States
  • Jan 30th
Carboloy CV40-CC3.0-32ER ER32 Cat 40 Holder Extension CNC Mill EXCELLENT !!!

Carboloy CV40-CC3.0-32ER ER32 Cat 40 Holder Extension CNC Mill EXCELLENT !!!

  • Youngstown, Ohio, United States
  • Jan 30th
Set of 3 NMTB #40 Tool Holders 1.25", 1" & 1"

Set of 3 NMTB #40 Tool Holders 1.25", 1" & 1"

  • Oregon, Ohio, United States
  • Jan 30th
Parlec 1" Dia CAT 50 Shank Shell Mill Holder - 6.00 Projection Length C50-10SM6

Parlec 1" Dia CAT 50 Shank Shell Mill Holder - 6.00 Projection Length C50-10SM6

  • Lockport, New York, United States
  • Jan 30th
Lot of 7 Monarch CNC Tool Holders

Lot of 7 Monarch CNC Tool Holders

  • Berlin, Connecticut, United States
  • Jan 30th
CAT V40 Shell Mill Holder, 1-1/4” Pilot, USA, New.

CAT V40 Shell Mill Holder, 1-1/4” Pilot, USA, New.

  • Tucson, Arizona, United States
  • Jan 30th

People who viewed this item also vieved

NEW KENNAMETAL 3/8" CARBIDE BORING BAR. C06-SDUPR-2 TAKES DPMT 21.5 INSERT. J250

NEW KENNAMETAL 3/8" CARBIDE BORING BAR. C06-SDUPR-2 TAKES DPMT 21.5 INSERT. J250

  • Mentor, Ohio, United States
  • May 29th
NEW 1/2" SOLID CARBIDE BORING BAR C08-STLCR-2 W/ 10 SUMITOMO 21. 51 INSERTS A844

NEW 1/2" SOLID CARBIDE BORING BAR C08-STLCR-2 W/ 10 SUMITOMO 21. 51 INSERTS A844

  • Mentor, Ohio, United States
  • May 29th
TUNGALOY CGWSRL16 TOOL HOLDER

TUNGALOY CGWSRL16 TOOL HOLDER

  • Stanley, North Carolina, United States
  • May 30th
Sandvik 880-06 04 06H-C-LM 1044 CARBIDE INSERTS

Sandvik 880-06 04 06H-C-LM 1044 CARBIDE INSERTS

  • Perris, California, United States
  • May 30th
Standard Tool USA Morse Taper Adapter Sleeve 2-5 MT Metal Lathe Spindle Adapter

Standard Tool USA Morse Taper Adapter Sleeve 2-5 MT Metal Lathe Spindle Adapter

  • Yorktown, Virginia, United States
  • May 31st
Morse Taper Sleeve 2-5 MT Metal Lathe Spindle Adapter Machinist Tool Drill Press

Morse Taper Sleeve 2-5 MT Metal Lathe Spindle Adapter Machinist Tool Drill Press

  • Yorktown, Virginia, United States
  • May 31st
Browning HX Tapered Pulley Sheave Hub Bushing 7/8" Bore HX7/8 D7/8

Browning HX Tapered Pulley Sheave Hub Bushing 7/8" Bore HX7/8 D7/8

  • Lorain, Ohio, United States
  • Jun 1st
NEW FENNER DRIVES 2" SHAFT KEYLESS BUSHING 6202560

NEW FENNER DRIVES 2" SHAFT KEYLESS BUSHING 6202560

  • Camden, New Jersey, United States
  • Jun 1st
Lot of Four BT40 Tool Holders 1/2 Inch (Inv.35597)

Lot of Four BT40 Tool Holders 1/2 Inch (Inv.35597)

  • Portland, Connecticut, United States
  • Jun 2nd
Lot of Four BT40 Tool Holders Briney, Carboloy, Sandvik 1/2 Inch (Inv.35598)

Lot of Four BT40 Tool Holders Briney, Carboloy, Sandvik 1/2 Inch (Inv.35598)

  • Portland, Connecticut, United States
  • Jun 2nd
KENNAMETAL KM50 GSRC DEEP GROOVING TOOL HOLDER MACHINIST SHOP TOOLING MACHINIST

KENNAMETAL KM50 GSRC DEEP GROOVING TOOL HOLDER MACHINIST SHOP TOOLING MACHINIST

  • Xenia, Ohio, United States
  • Jun 9th
Armstrong # 51 Threading Tool Holder

Armstrong # 51 Threading Tool Holder

  • Waterbury, Connecticut, United States
  • Jun 9th
Proxxon 24120 PD230/E Lathe Mill Tail Stock Drill Chuck MT1 B12 Germany Rohm

Proxxon 24120 PD230/E Lathe Mill Tail Stock Drill Chuck MT1 B12 Germany Rohm

  • Saint Thomas, Pennsylvania, United States
  • Jun 9th
Ryobi 1/2 in. x 1/4 in. Arbor Adaptor, Made of metal, Reversed Shaft, A10AA01

Ryobi 1/2 in. x 1/4 in. Arbor Adaptor, Made of metal, Reversed Shaft, A10AA01

  • Tallahassee, Florida, United States
  • Jun 9th
LOT OF 4 AUTO SHANK UNIVERSAL ENG. KWIK SWITCH 400 LOC2426

LOT OF 4 AUTO SHANK UNIVERSAL ENG. KWIK SWITCH 400 LOC2426

  • Sidney, Ohio, United States
  • Jun 10th
UNIVERSAL ENG. 80419 KWIK SWITCH 400 COLLET CHUCK Y LOC2425

UNIVERSAL ENG. 80419 KWIK SWITCH 400 COLLET CHUCK Y LOC2425

  • Sidney, Ohio, United States
  • Jun 10th
SUNNEN K4A63 K4J65 K4J95 Variety package-nt Kwik Way, Rottler

SUNNEN K4A63 K4J65 K4J95 Variety package-nt Kwik Way, Rottler

  • Chatham, Ontario, Canada
  • Oct 25th
NICE LOT OF SUNNEN STONES, MANDRELS, BELT, TRUING SLEEVES

NICE LOT OF SUNNEN STONES, MANDRELS, BELT, TRUING SLEEVES

  • Ellington, New York, United States
  • Oct 26th
ER16 Power Head 1HP 3000rpm Belt Spindle Milling Head 5 Bearing Milling Cutting

ER16 Power Head 1HP 3000rpm Belt Spindle Milling Head 5 Bearing Milling Cutting

  • Shenzhen, China
  • Nov 3rd
SPINDLE CLEANERS

SPINDLE CLEANERS

  • California, United States
  • Nov 3rd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies