Tektronix 7ct1n Curve Tracer Plug In W/ Adapter! Calibrated!

US $360.00

Albuquerque, New Mexico, United States
Jan 29th

Open on mobile:
QR code

In these bad economic times, get more “bang”, for your money with tested, working and calibrated test equipment from AAA Equipment Resources INC. I AM A WELL KNOWN SELLER AND BUYER OF ALL WORKING TEST EQUIPMENT.WE OUR ONE OF EBAYS TOP SELLERS OF TESTED, WORKING, AND CALIBRATED TEST EQUIPTMENT FOR OVER TWELVE YEARS. I AM A MAN OF MY WORD. OUR GOAL IS TO EXCEED CUSTOMER’S EXPECTATIONS. YOU ARE BUYING A PROFESSIONALLY TESTED AND CHECKED OUT AS FULLY FUNCTIONAL, TEKTRONIX 7CT1N CURVE TRACER PLUG IN WITH ADAPTER. It was just calibrated. Due Date 8/06/15. The unit is in great cosmetic condition. May have a small scratch here or there. All buttons, knobs, and switches are good and intact. The serial # is B054377. It works with a 7000 series mainframe which works with 120 & 240 volts. We always re-check the item before we ship it. This makes sure the item is working when it left my shop. NO options are marked. WE WILL RE-CALIBRATED THE UNIT BEFORE SHIPPING AND A NIST TRACEABLE CALIBRATION CERTIFICATE, WILL BE PROVIDED AFTER ITEM IS RECEIVED AND IS ACCEPTED AS WORKING WITH IN SPECS. WE WILL MAIL OUT THE CERTIFICATE. THE RE-CALIBRATION DELAYS THE SHIPPING TIME THREE (3) DAYS. This 7CT1N is designed to operate with the 7000 series of oscilloscopes to provide a means of displaying the characteristics of small-signal or lower dissapation power transistors or FET’s up to 0.5 watts with collector voltages ranging from 0-75 volts or 0-300 volts and up to 240 mA (at 7.5 volt collector supply) or 6 mA (at 300 volt collector supply). It can be used in either a vertical or horizontal compartment and uses a corresponding vertical or horizontal plug-in to provide the other axis trace. A cable/connector is provided on the front panel to provide this connection. It can be detached from the front panel and extended to fit the plug-in input or it can be left and a user supplied BNC adapter and cable used to connect. The plug-in used for the other axis must not be a 50 ohm input unit. A button is provided to determine which type compartment is being used on the front panel. It can provide up to 10 steps with a selectable offset from 0 to5. Vertical current display factors range from 10 nA/div to 20 uA with the divide by 2000 button enabled and from 10 uA to 20 mA/div in the X1 mode. In the FET mode, step amplitude ranges from 1 mV/step to 1 V/step in a 1-2-5 sequence. This provides great versatility in testing diodes, transistors, or FET’s of a wide variety. It is supplied with a set of three color-coded grabber clips for interfacing with the device under test. 3-lead adapters from Tek’s 575 or 576 curve tracers can also be used. I HAVE THE 7S11 PLUG IN, 7S12 PLUG IN, 7T11 PLUG IN AND DIFFERENT 7000 SERIES PLUG INS ON DIFFERENT EBAY SELLS. TAKE A LOOK AND SEE. YOU MAY FIND SOME MORE PLUG INS YOU NEED. WE CAN SHIP TOGETHER FOR A CHEAPER SHIPPING COST. Reasonable offers are well come! REASONABLE ONES. You get the Tektronix 7CT1N Curve Tracer plug in and Tek. 013-0070-01 adapter. NO manual or mainframe. Again, it was tested and works fine! GET THIS GREAT WORKING, TEKTRONIX 7CT1N CURVE TRACER PLUG IN WITH ADAPTER TODAY! Buy from an experance sell. Bid with confidence as feedback speaks for itself. Buyer pays $15.00 shipping in 48 states. I WILL NOT SHIP TO BRAZIL, BY USPS INTERNATIONAL PRIORITY MAIL! PAYPAL, Bill Me Later, bank check, and personal/business check (10 day hold) is accepted. Wire transfers are good too. I do not take credit cards myself. I only take credit cards through PAYPAL. I will not use your UPS account to ship the item on. There are too many problems with them charging me for the shipment and not the account, we sent it on! I do all my international wrapping, boxing, paper work, and shipping myself. I can do it cheaper then EBAY or any other packing company! I get the best and cheapest shipping company available, at the time. There will be a $5.00 International buyer fee for paper work. There are some countries that have a 79 inch max girth box size with USPS. Some bigger items cannot fit this size box, so we have to send it FEDEX Econ. I get a discount and would pass this discount on to the buyer. My phone # is 505-235-5613. This is my website for more equipment you may need: http://aaaequipmentresourcesinc.com/index.html Yes, you can always find test equipment on Ebay that cost less than my equipment, but it will NOT have the same quality, NIST Traceable Calibration, or 12 years track record on Ebay. These are just people that sell, to make a quick buck today, then gone tomorrow. You choose? We know you have a choice on which items you buy, so THANKS for your time and for buying from AAA Equipment Resources INC. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Tektronix
Country/Region of Manufacture	United States
Model	7CT1N
TEKTRONIX	CURVE TRACER PLUG IN