Tektronix TPA BNC Oscilloscope Interface Adapter, US $93 – Picture 0

Tektronix TPA BNC Oscilloscope Interface Adapter, US $93 – Picture 1

Tektronix TPA BNC Oscilloscope Interface Adapter, US $93 – Picture 2

Tektronix TPA BNC Oscilloscope Interface Adapter, US $93 – Picture 3

Tektronix Tpa Bnc Oscilloscope Interface Adapter

US $93

Broomfield, Colorado, United States
Jun 9th

Open on mobile:
QR code

Working TPA BNC Tektronix Oscope Interface adapter. Great condition, I've used it myself, no issues. Nice unit, I no longer need it. See below for specs and details from Tektronix. FREE SHIPPING Domestic US ONLY. International MUST use Ebay Global Shipping. Paypal Only Characteristics Bandwidth - DC to >3 GHz. VSWR - <1.23:1 up to 3 GHz. RF Insertion Loss - <0.25 dB. Delay Time - 245 ps. Maximum Input Signal Voltage - 42 Vpk-pk, 30 VRMS, 60 VDC. TPA-BNC Adapter enables existing TekProbe® interface products (active, differential, high-voltage, current, and optical probes) to be used with the newest generation of Tektronix oscilloscopes which feature the TekVPI™ probe interface architecture. Existing TekProbe-BNC probe types simply plug into the TPA-BNC adapter which is then plugged directly into any channel of an oscilloscope equipped with the TekVPI probe interface. The TPA-BNC adapter recognizes and supplies the necessary power and serial communication and offset control as used by the connected TekProbe product accessory. Enables Existing TekProbe® Products to Connect to Oscilloscopes with the TekVPI™ Probe Interface An Easy-to-use Plug-in Adapter to the Oscilloscope’s TekVPI Interface Provides Necessary Power, Communication, and Offset Control as Needed by the Attached TekProbe Product Provides Overcurrent and Thermal Overload Protection for the Attached TekProbe Product Provides an LED Probe Status Indicator which Identifies that the Probe has Powered-up Successfully TekProbe is a probe interface architecture introduced in 1986, and used on many earlier models of Tektronix oscilloscopes including the TDS300, TDS400, TDS500, TDS600, TDS700, TDS3000/B/C, TDS5000/B, and TDS7000 Series. In addition to coupling the signal from the probe to the oscilloscope, the TekProbe interface provides power and offset control to active probes. It also allows the oscilloscope to sense the probe’s attenuation scale factor and/or probe type.

“Working unit, great cosmetic condition.”