Telguard Tg-200 Cellular Alarm Dialer For Both Burglar Or Fire Applications.

US $370

Memphis, Tennessee, United States
Nov 7th

Open on mobile:
QR code

This auction is for a Telguard TG-200 Cellular dialer. It is new in it's original box. Tested to the extent of powered up and determined that the unit is not programmed (not activated through Telguard). Is complete with paperwork, Antenna and wall power adapter. Please study pictures carefully as this is the exact unit you will receive. Thank you for your interest in our auction and please do not hesitate to ask any questions you may have. TG-200 Burglary and Fire Model UL Listed for Commercial Fire and Residential Burglary (UL1023, UL985, UL864) use. Complete with Red key-locking metal enclosure, magnetic mount antenna with 12 feet of cable, battery harness, connecting cable, TLM and 16.5VAC, 40VA UL-Listed plug-in power transformer. • Full Data Reporting to Central Station • Telephone Line Monitor (TLM) built-in • Integral Power Supply with Battery Harness • Automatic Self Test (Daily, Weekly or Monthly) • Alarm panel formats for 3x1, 4x2 @ 1400Hz & 2300Hz & Contact ID • “M” models support Modem IIe or IIIa2 formats • Nationwide coverage • Easy activation with Telular Cellular Service • Cellular service can be activated via a toll-free interactive voice response (IVR) system • Account management with the Remote Access • Power Input Rating: 120 VAC, 0.48A • Battery Charging Circuit: Max full charge DC voltage: 13.8V +/- .01V • Max ripple: 30 mV • Low capacity charge for 0.8 Ah or 1.2 Ah Battery = Maximum charging current of 200mA • High capacity charge for 4.0, 7.0, or 14.0 Ah Battery = Maximum charging current of 1.2 Amp. • Max voltage drop at max current: 1% • Transformer supplied: 16.5 VAC, 40 VA, UL Listed Transceiver • Frequency range: 824.030 - 848.980 MHz Transmit, and 869.030 - 893.980 MHz Receive • Transmit Power: 3 watts (max. allowable) Physical Details • TG-100: 91 /2" H x 41 /2" W x 13 /4" D • TG-200: 12" H x 12" W x 31 /2" D • TG-300: 12" H x 12" W x 4" D • Shipping Weight: 12 lbs (with transformer) • FCC Registration: 5BHUSA-30483-MO-E. Ringer Equivalence O.1B. • Operating Environment: -10 degrees C to +50 degreesC; 0-90% humidity (non-condensing). High Security Supervision • Programmable relay output is available for tripping host Control Communicator when trouble conditions occur • Telguard may be programmed to test itself periodically by transmitting a specific Automatic Self-Test via cellular to the central station • Four diagnostic LED’s inform you of the functionality of the unit and can provide a variety of information • AC Power: identifies AC Power • System Trouble Conditions • Operational Mode • Radio Activity Communications When communications are not possible over the telephone line, Telguard switches the host alarm system’s communication to the wireless cellular network. All security transmissions are then sent via cellular exactly as if the signal had been conveyed over the landline. When Telguard DataBurst is programmed to operate in MODE 1, the telephone line is always the primary communication path. Telguard DataBurst only transmits alarm data when the phone line is not operational. This cuts down on unnecessary cellular traffic and avoids sending redundant messages to the monitoring station. Telguard can also be programmed as the primary communication path. When it is set to MODE 2, it will send all alarm data via cellular and use the landline as a secondary path.