+ Post new Ad
Telmark Poly Cold Model TVP-2000 Cryogenic Pump for Vacuum Vapor Trap, US $1,495.00 – Picture 0
Telmark Poly Cold Model TVP-2000 Cryogenic Pump for Vacuum Vapor Trap, US $1,495.00 – Picture 1
Telmark Poly Cold Model TVP-2000 Cryogenic Pump for Vacuum Vapor Trap, US $1,495.00 – Picture 2
Telmark Poly Cold Model TVP-2000 Cryogenic Pump for Vacuum Vapor Trap, US $1,495.00 – Picture 3
Telmark Poly Cold Model TVP-2000 Cryogenic Pump for Vacuum Vapor Trap, US $1,495.00 – Picture 4
Telmark Poly Cold Model TVP-2000 Cryogenic Pump for Vacuum Vapor Trap, US $1,495.00 – Picture 5
Telmark Poly Cold Model TVP-2000 Cryogenic Pump for Vacuum Vapor Trap, US $1,495.00 – Picture 6
Telmark Poly Cold Model TVP-2000 Cryogenic Pump for Vacuum Vapor Trap, US $1,495.00 – Picture 7
Telmark Poly Cold Model TVP-2000 Cryogenic Pump for Vacuum Vapor Trap, US $1,495.00 – Picture 0
Telmark Poly Cold Model TVP-2000 Cryogenic Pump for Vacuum Vapor Trap, US $1,495.00 – Picture 1
Telmark Poly Cold Model TVP-2000 Cryogenic Pump for Vacuum Vapor Trap, US $1,495.00 – Picture 2
Telmark Poly Cold Model TVP-2000 Cryogenic Pump for Vacuum Vapor Trap, US $1,495.00 – Picture 3
Telmark Poly Cold Model TVP-2000 Cryogenic Pump for Vacuum Vapor Trap, US $1,495.00 – Picture 4
Telmark Poly Cold Model TVP-2000 Cryogenic Pump for Vacuum Vapor Trap, US $1,495.00 – Picture 5
Telmark Poly Cold Model TVP-2000 Cryogenic Pump for Vacuum Vapor Trap, US $1,495.00 – Picture 6
Telmark Poly Cold Model TVP-2000 Cryogenic Pump for Vacuum Vapor Trap, US $1,495.00 – Picture 7

Telmark Poly Cold Model Tvp-2000 Cryogenic Pump For Vacuum Vapor Trap

US $1,495.00

  • Capac, Michigan, United States
  • Jan 30th
Open on mobile:
QR code
Telmark Poly Cold Model TVP-2000 Cryogenic pump for high vacuum water vapor trap.  2000 watts,    90,000 l/sec    Size: 37 inch wide, 24 inch deep,  69 inch high  600 lbs
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Telmark
Application Cryogenic Vacuum Pump
Model TVP-2000
Type Poly Cold

Directions

Similar products from Other Plastic Processing Tools

26T MK8 Printer Copper 26tooth Gear 11mm x 11mm For DIY New 3D Printer Extruder

26T MK8 Printer Copper 26tooth Gear 11mm x 11mm For DIY New 3D Printer Extruder

  • Hong Kong, Hong Kong
  • Jan 30th
Procedyne Hot Fluidized Sand Bath Model PCF 102015 In Very Good Condition

Procedyne Hot Fluidized Sand Bath Model PCF 102015 In Very Good Condition

  • Dalton, Georgia, United States
  • Jan 30th
Lantech Stretch Wrapper Model T 3212 In Good Condition

Lantech Stretch Wrapper Model T 3212 In Good Condition

  • Dalton, Georgia, United States
  • Jan 30th
Unimac Commercial Washer And Dryer Set In Excellent Condition-Model No's below

Unimac Commercial Washer And Dryer Set In Excellent Condition-Model No's below

  • Dalton, Georgia, United States
  • Jan 30th
Van Dorn Demag O-Rings 20118 Lot of 23

Van Dorn Demag O-Rings 20118 Lot of 23

  • Huntsville, Alabama, United States
  • Jan 30th
Akinsun Red Rod Cartridge Heater, 5/8" x 27 1/2", 2200W, 480V, New

Akinsun Red Rod Cartridge Heater, 5/8" x 27 1/2", 2200W, 480V, New

  • Tazewell, Virginia, United States
  • Jan 30th
Akinsun Red Rod Cartridge Heater, 1/4" x 2 1/2", 200W, 240V, New

Akinsun Red Rod Cartridge Heater, 1/4" x 2 1/2", 200W, 240V, New

  • Tazewell, Virginia, United States
  • Jan 30th
Sterling Extruder #57977

Sterling Extruder #57977

  • Holly, Michigan, United States
  • Jan 30th
Airless Paint Spayer by Sherwin Williams/Graco model Ultimate MX 695- Good Shape

Airless Paint Spayer by Sherwin Williams/Graco model Ultimate MX 695- Good Shape

  • Dalton, Georgia, United States
  • Jan 30th
Molder Action Network Van Dorn Demag 313093 Injection Seal

Molder Action Network Van Dorn Demag 313093 Injection Seal

  • Napoleon, Ohio, United States
  • Jan 30th
NEW DME MOLD DATING INSERTS 10MM DIAMETER MODEL MDI 0016 (2 AVAILABLE)

NEW DME MOLD DATING INSERTS 10MM DIAMETER MODEL MDI 0016 (2 AVAILABLE)

  • Rochester, New York, United States
  • Jan 30th
VERY NICE CONAIR 300 LB AUTOCOLOR BLENDER # 100-426-02

VERY NICE CONAIR 300 LB AUTOCOLOR BLENDER # 100-426-02

  • Rochester, New York, United States
  • Jan 30th
HOPPMANN FR/20 FR20 CENTRIFUGAL FEEDER / CAP SORTER (#760)

HOPPMANN FR/20 FR20 CENTRIFUGAL FEEDER / CAP SORTER (#760)

  • Bosque Farms, New Mexico, United States
  • Jan 30th
Killion Davis Standard Cast Film Sheet Cooling & Pull Roll Stand

Killion Davis Standard Cast Film Sheet Cooling & Pull Roll Stand

  • Capac, Michigan, United States
  • Jan 30th
Soldered Heated Bed with LEDs and resistor for Reprap 3D printer USA SELLER

Soldered Heated Bed with LEDs and resistor for Reprap 3D printer USA SELLER

  • Columbus, Ohio, United States
  • Jan 30th
Up! 3D Printer 2 Extra Filament And Building Platform

Up! 3D Printer 2 Extra Filament And Building Platform

  • Spanish Fort, Alabama, United States
  • Jan 30th
3D printer control suite RAMPS 1.4 + 5pcs 4988 driver with heat sink

3D printer control suite RAMPS 1.4 + 5pcs 4988 driver with heat sink

  • Shenzhen ,Guangdong, China
  • Jan 30th
Van Dorn Square Style Coil Valves 24VDC

Van Dorn Square Style Coil Valves 24VDC

  • Largo, Florida, United States
  • Jan 30th
Conair Thermolator

Conair Thermolator

  • Feasterville-Trevose, Pennsylvania, United States
  • Jan 30th
0.8mm Extruder Nozzle 3D Printer 3.00mm Filament

0.8mm Extruder Nozzle 3D Printer 3.00mm Filament

  • Tunkhannock, Pennsylvania, United States
  • Jan 30th

People who viewed this item also vieved

Clamping Cylinder Arburg SN. 78744 suitable for 270 320 C V Dialogica Selogica

Clamping Cylinder Arburg SN. 78744 suitable for 270 320 C V Dialogica Selogica

  • Pegnitz, Germany
  • Jun 11th
Ensign Box Tipper 10-6000 Used #74890

Ensign Box Tipper 10-6000 Used #74890

  • Holly, Michigan, United States
  • Jun 11th
Foster FJT 300 Series FP354 1/2" NPT Plug Injection Molding Coolant water line

Foster FJT 300 Series FP354 1/2" NPT Plug Injection Molding Coolant water line

  • Algonquin, Illinois, United States
  • Jun 11th
Foster FJT 300 Series FP353F 3/8" NPT Plug Injection Molding Coolant water line

Foster FJT 300 Series FP353F 3/8" NPT Plug Injection Molding Coolant water line

  • Algonquin, Illinois, United States
  • Jun 11th
Foster FJT 300 Series FP353FB 3/8" Plug Injection Molding Coolant water line

Foster FJT 300 Series FP353FB 3/8" Plug Injection Molding Coolant water line

  • Algonquin, Illinois, United States
  • Jun 11th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies