Temperature Control Governor Module 100% Brand New Accessories High Quality

US $8.79

  • suzhou, China
  • Jul 11th
Product Description Temperature Control Governor Module 100% Brand New Accessories High Quality Product description: 100% brand new and high quality Made of high-quality materials, durable Working voltage: DC12V Circuit load capacity: the maximum current of each output is 5A, and the bus current is up to 9A Output range: 20%-100% or 40%-100% of the first channel (TFL = ON) The second channel and the third channel 10%-100% (Note: The above range is only applicable to the PWM range, the actual control effect will vary depending on the fan.) Temperature probe parameters: 50K B = 3950 Temperature zone error of the thermostat: the error depends on the temperature probe, usually 3-5% Minimum speed for stall alarm: 700-800 rpm Function setting switch description: TFL (No. 1): The lowest temperature channel PWM setting, when FAN1 PWM is ON, the minimum is 40%, when FAN1 is OFF1, the minimum PWM is 20%. TP1 TP2 (No. 2, 3): The explanation of the temperature zone controlled by the temperature channel is as follows (need to be used in conjunction with the temperature probe): TP1 TP2 acceleration temperature full speed temperature Closed 35°45° Switch 40°55° Closed 50°70° Open open 60°90° When the temperature is lower than the acceleration temperature, it will output at the minimum speed; when it exceeds the entire temperature, it will always output at full speed. BF1 BF2 (No. 4, 5): Corresponding to the FAN1 FAN2 stall alarm function switch, when the corresponding open channel fan fails, the controller will give an audible and visual alarm (with a buzzer), and the alarm will be automatically eliminated when the fan rotates back . If BF1 and BF2 are both turned on (ON), both FAN1 and FAN2 will stop or stop, and the controller will issue an alarm! Package list: 1 *Governor module 1 *Temperature probe 1 *Hum Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2.Please allow slight manual measurement deviation for the data. Payment We accept payment via Paypal only. Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message. Delivery details   We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.   Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.    It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.   Contact us   We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
MPN Does Not Apply
Package Contents 1 *Governor module 1 *Temperature probe 1 *Hum
Brand Unbranded
UPC Does not apply

Directions

Similar products from Motor Speed Regulators & Controllers

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies