Temperature Controller Of Thermoelectric Cooler Peltier Gi

US $23.44

Shenzhen, China
Jan 29th

Open on mobile:
QR code

The Temperature Controller of the Thermoelectric Cooler Peltier is a powerful device designed to measure and control temperatures in the range of -50a?? to 110a??. With a screen accuracy of 0.1a?? and control accuracy of 1a??, this temperature controller is perfect for applications that require precise temperature control. This temperature controller comes along with a temperature sensor (1 meter length wire) and has a relay current up to 10A/30V. With a temperature measurement range of -50a?? to 110a??, temperature control range of -50a?? to 110a??, and measurement tolerance of +/-0.5a??. It uses a temperature sensor model no. NTC (10K/3435) and has a temperature control accuracy of 1a??. The working voltage of this temperature controller is DC 12V and working current is Max 200mA. It has a relay current of Max DC 10A/30V and parameters are automatically saved. The operation temperature is 0a?? to 50a?? and storage temperature is -10a?? to 60a??. The panel dimensions are 75x34.5mm, alignment dimension of 70x28mm, and total dimension of 75x34.5x85mm. The Temperature Controller of the Thermoelectric Cooler Peltier can be directly connected to the TE cooler with automatic electrode switching for constant temperature control. It also features fan control for the heat sink and hysteresis error settings for both cooling and heating. The parameters are set while ex-factory and it includes a warning for over temperature or low temperature. Additionally, parameters are automatically saved when power-off and it has a power input of DC 12V. Connections for the Temperature Controller of the Thermoelectric Cooler Peltier are as follows: Pin 1 & 2 connect to the TE cooler. Pin 1 is + and Pin 2 is - while heating. Pin 1 is - and Pin 2 is + while cooling. Pin 3 & 4 connect to the fan. Pin 3 is - and Pin 4 is +. Pin 5 & 6 connect to the power supply (DC 12V or DC 24V). Pin 5 is + and Pin 6 is -. If shorted circuit, the parameters setting will not be changed. Pin 9 & 10 connect to the sensor