Test-um Jdsu Validator Nt905 Network Lan Ethernet Cable Tester Nt-905 - Tested

US $849.00

  • Fishers, Indiana, United States
  • Jun 9th
Test-Um JDSU Validator-NT905 Network / LAN Cable Tester Test And Speed Certify The Data-Carrying Capabilities Of Ethernet Network Cables   What a deal!  Only used a handful of times, this Validator Tester has been thoroughly tested and is in excellent working condition. You would be hard pressed to tell if it were new or used.    The Validator comes with a zipper briefcase with all pockets and zippers in good condition. Outside of the front of the briefcase shows a little wear.  Rechargeable batteries have only been through a few recharge cycles. Parts list detailed below.   Product version: Serial Number- 052367-0200    This Test Kit Includes: u  Test-Um Validator-NT905 Tester Unit u  Test-Um Validator Remote Unit u  Test-Um Validator Remote Adapters 1 thru 8 u  64 MB Memory Card with Software loaded u  2 Ethernet Cables u  2 RJ45 to Multi-Clip Cables u  2 RJ 11 Cables u  2 Coax to BNC Adapter u  2 Battery Packs u  2 AC Adapter/Chargers u  RS232 PC Interface Cable u  USB PC Interface Cable u  Carry-case with Strap u  Software CD Includes Carrying Case & Accessories As Listed Above! The Validator series of Ethernet Network Management Tools offer a complete solution to test and speed certify the data-carrying capabilities of Ethernet network cables up to 1 Gb/s by testing for noise in the network, detecting faults in the cabling wiring, and ensuring that cables are able to support the speed capabilities of active equipment. To certify Ethernet speed performance of cable runs, the Validator series handheld testers conduct Bit Error Rate (BER) tests by sending data packets down specified cable runs at defined data rates to check for errors at the maximum throughput of the link. Both Validator and Validator-NT also report on signal quality that can impact high-speed data transmission by measuring signal-to-noise ratio (SNR). Skew mea­surements report on the signal time delay between pairs that can impact Ethernet data transmission. Finally, the Validator series units provide continuity testing that detects opens, shorts, miswires, split pairs, reversals, and high-resistance faults while accurately measuring distance to faults and total cable length. The Validator-NT includes a comprehensive set of features to test the active network capabilities of a network: port discovery for speed and capability detection of active devices up to 1 Gb/s; ping test to verify connectivity to IP hosts on or off the local network; and discovery of network devices using Cisco Delivery Protocol (CDP). Cabling Installation and Planning Software Validator and Validator-NT include the powerful Plan-Um® planning and reporting software for planning network architectures and organizing cable information and test results. Plan-Um helps set-up each job, defines scope of the job, aids in testing cable runs, and produces reports for the installer and customer. The Network Tools feature provides a quick way to see the network architecture and a way to document moves, adds, and changes. Used in conjunction with Plan-Um, Validator and Validator-NT provide confidence in the physical properties of cable runs and the overall capability of the network. Specifications: Physical Characteristics Physical Dimensions Main Unit Size: 22.9 x 11.4 x 5.3 cm (9 x 4.5 x 2.1 inches) Main Unit Weight 710 grams (1 lb 9 oz) with battery Remote Size: 14.2 x 11.2 x 4.4 cm (5.6 x 4.4 x 1.8 inches) Remote Weight: 341 grams (12 oz) with battery Environmental Operating temperatures: 0 to 50 degrees C (32 to 122 degrees F) Storage temperature: –20 to 70 degrees C (–4 to 158 degrees F) Humidity: 10 % to 85%, non-condensing Test Connectors 8-position shielded modular jack (data) 6-position modular jack (telephone) F-coax (video) and dual banana jack (security, speaker, etc) Cable Types Shielded or unshielded CAT3, 5, 5E, 6 Telephone, coax, speaker wire, security, fire, and alarm Battery Type Rechargeable, removable lithiumion packs Maximum cable length for testing for split pairs Up to 1500 feet, depending upon cable type Operating Specifications Display: 256 color back-lit LCD Power Source: AC adapater/lithiumion rechargeable batteries Interfaces: USB port for uploading/downloading files to/from a laptop/PC Operating System: Linux Keypad: Full navigation set with easy alphanumeric data entry and soft key functions   Product  Features Conducts Bit Error Rate (BER) testing to speed certify Ethernet data transmission speed up to 1000BASE-T (1 Gb/s) Measures Signal-to-Noise Ratio and Skew to uncover impairments to Ethernet data transmission Tests for opens, shorts, split pairs, miswires, and reversals and measures distance to opens and shorts—supports all network, telco, and coax cables Identifies cable termination on active Ethernet ports with hub flash Performs port discovery to detect advertised Ethernet speed and displays capabilities of network devices Pings network devices to verify connectivity to active equipment Includes Plan-Um® software to create network layout, document cable tests, show network topology, and record moves, adds, and changes  Applications Verify proper operation of Ethernet cable runs Certify speed capability of cable runs to support 10/100/1000 Mb/s Ethernet applications Ensure configuration of and connectivity with active network devices Document network topology including moves, adds, and changes                                   If you would, please READ the following                                            Terms & Conditions carefully.                  If you don’t agree to the terms listed below, please don’t bid.   Payment We only accept PayPal.  Payment is due within 5 days after winning auction. Item will be shipped within 48 hours once full payment has been received, most of the time within 24 hours. We reserve the right to cancel and relist item if payment is not received after 5 days.   Shipping We ship to the U.S.A. ONLY.  SORRY NO INTERNATIONAL SHIPPING. All items are shipped out of Indianapolis, Indiana to PayPal confirmed addresses only.  Shipping is confined to within the U.S. 48 contiguous states only.  This means we ship to the lower states 48 only and we do not ship overseas.    Try as we might to package for rough shipping, occasionally small parts are jostled loose during shipping, this is normal.  We will do everything we can to keep this from happening.   California residents must pay 9.25% California sales tax.   Returns WE GLADLY ACCEPT RETURNS ON ALL ITEMS IF YOU ARE NOT COMPLETELY SATISFIED. Buyer is responsible for return shipping costs however.    We strive for a pleasant buying experience and a FIVE STAR rating upon receiving your item.  Therefore, if there are any problems please contact us before leaving a less than FIVE STAR rating so we may have the opportunity to make good on this transaction.  eBay bases our fees on cases and feedback. In order to keep our prices low, we encourage you to contact us first.  We will gladly resolve any issue as long as you give us the chance to do so.  Good luck on your bid and we hope to see you again soon.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand JDSU
Model Validator NT905

Directions

Similar products from Older Platforms for Network Analysis

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies