*tested* National Instruments Gpib-enet/100 Gpib Controller Kit For Ethernet

US $450.00

  • Boise, Idaho, United States
  • Feb 15th
This listing is for a tested and guaranteed National Instruments (NI) GPIB-ENET/100 ethernet to GPIB interface/controller, Assy #186852K-01L (RoHS compliant), same unit shown, and with all other items pictured and described. The GPIB-ENET/100 is fully tested and works in both DHCP and direct IP setting modes. The device is in good physical condition. The device has recent firmware version C.9 and passes all NI 488.2 tests, and has been tested to ensure it's ability to properly identify (scan GPIB bus), query and control GPIB devices. The GPIB-ENET/100 has minor cosmetic wear that will not affect function or performance, cosmetically it is in excellent condition. The Ethernet crossover cable is included for easy setup/configuration directly connected to a host PC Ethernet port (the patch cable is used for normal network use). This listing includes- NI GPIB-ENET/100 Device (186852K-01L), NI GPIB 488.2 software version 2.7.3 for Windows 7/Vista/XP/2000, Power adapter with US Standard 120VAC power cord, NI type X2 1.1 meter GPIB cable, New Leviton CAT5E 10' Ethernet patch cable, New Belkin CAT6 7' Ethernet crossover cable, GPIB-ENET/100 Installation Guide (printed excerpt from NI GPIB hardware guide). From NI- The NI GPIB-ENET/100 Ethernet-to-GPIB controller and NI-488.2 take advantage of network connectivity in instrument control applications. Using the RoHS-compliant GPIB-ENET/100, networked computers can communicate with and control IEEE 488 devices from anywhere on an Ethernet-based (LAN) TCP/IP network. You can use the GPIB-ENET/100 to share a single GPIB system among many networked users or to control several test systems from a single networked host computer. DHCP or manual IP address assignment; compatible with twisted pair (10BASE-T and 100BASE-TX) More than 900 kB/s maximum sustained transfer rate Controls IEEE 488 instruments anywhere on an Ethernet-based TCP/IP network NI-488.2 driver software available for Windows, Linux®, Mac OS X, Solaris, and more RoHS compliance Interfaces to and shares up to 14 GPIB devices from several network hosts. The GPIB-ENET/100 kit will be well packaged in box and shipped by USPS Priority Mail, signature required, insured. The tracking # will be entered into ebay and Paypal systems after shipment.
National Instruments (NI) GPIB-ENET/100 Ethernet Controller for GPIB, includes power supply with cord with fastener to attach securely to GPIB-ENET/100 device, used NI GPIB X2 1.1M cable, new Leviton Ethernet patch cable, new Belkin Ethernet crossover cable, new NI 488.2 version 2.7.3 software/driver kit (supports Windows 7/Vista/XP/2000), and NI GPIB-ENET/100 Installation Guide (excerpt from GPIB hardware manual). The GPIB-ENET/100 is in excellent condition with only minor cosmetic wear that will not affect function or performance. The unit has been fully tested and operates properly in both DHCP and static IP modes and communicates properly with GPIB devices- it has recent firmware version C.9. It will be delivered setup in the default DHCP mode of operation. A static IP address can be configured if desired, using the configuration utility provided with software. The Installation Guide provides detailed instructions needed to configure the device.
Model GPIB-ENET/100
Manufacturer National Instruments
Country/Region of Manufacture Hungary

Directions

Similar products from Data Loggers and Data Acquisition Cards

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies