+ Post new Ad
Textron (Bridgeport) Milling Machine DRO no reserve, US $19000 – Picture 0
Textron (Bridgeport) Milling Machine DRO no reserve, US $19000 – Picture 1
Textron (Bridgeport) Milling Machine DRO no reserve, US $19000 – Picture 2
Textron (Bridgeport) Milling Machine DRO no reserve, US $19000 – Picture 3
Textron (Bridgeport) Milling Machine DRO no reserve, US $19000 – Picture 0
Textron (Bridgeport) Milling Machine DRO no reserve, US $19000 – Picture 1
Textron (Bridgeport) Milling Machine DRO no reserve, US $19000 – Picture 2
Textron (Bridgeport) Milling Machine DRO no reserve, US $19000 – Picture 3

Textron (bridgeport) Milling Machine Dro No Reserve

US $19000

  • Salem, Oregon, United States
  • Mar 5th
Open on mobile:
QR code
Textron DRO, manufactured about 1983. No Reserve. Most of what the successful bidder will pay will be for shipping. This includes glass scales for both horizontal axis, all cabling and mounting hardware. The display works fine, but sometimes, when moving the x-axis to the left, using either power feed or manual movement, it skips or freezes up momentarily. I tried cleaning the glass scale, but it still acts up on occasion. It does not tend to act this way when one slowly hand cranks the handle. The Y-axis works fine. See the Youtube short video at I've not used all the functions with this unit, so I cannot confirm them as working. I will include a photocopy of the original manual. The X-axis scale & shroud mounts to the slot on the front of the table, and I've included photos of how the Y-axis scale & shroud mounted on the right hand side of the mill. I will firmly affix and tape the read heads to the scale units, to protect from damage while shipping. The maximum X-axis range is approximately 26.8" and the Y-axis is approximately 11.5". X-axis scale was mounted on the front of my mill, but there's no reason it couldn't be mounted in back of the table if you do not mind losing about 2" of travel. 115 VAC required, @ 0.5 amps. I cannot give any kind of warranty with this unit, which is why I'm selling it so cheap.
Condition:
For parts or not working: An item that does not function as intended and is not fully operational. This includes items that are defective in ways that render them difficult to use, items that require service or repair, or items missing essential components. See the seller’s listing for full details. ...
Brand Bridgeport
Model Textron

Directions

Similar products from Tools for Milling Machines

2 GORTON PANTOGRAPH MIDGET CHUCKS 1/8"

2 GORTON PANTOGRAPH MIDGET CHUCKS 1/8"

  • Norman, Oklahoma, United States
  • Mar 5th
PILE OF MACHINIST TOOLING PUNCH BLOCK TAP HANDLES PARTS AND PIECES

PILE OF MACHINIST TOOLING PUNCH BLOCK TAP HANDLES PARTS AND PIECES

  • Waterford, Michigan, United States
  • Mar 5th
STARRETT NO. 246 SHAPER PLANER HEIGHT GAGE GAUGE MACHINIST TOOL

STARRETT NO. 246 SHAPER PLANER HEIGHT GAGE GAUGE MACHINIST TOOL

  • Waterford, Michigan, United States
  • Mar 5th
2 SETS OF 1 2 3 BLOCKS MACHINIST SETUP TOOLING INSPECTION MILL GRINDING

2 SETS OF 1 2 3 BLOCKS MACHINIST SETUP TOOLING INSPECTION MILL GRINDING

  • Waterford, Michigan, United States
  • Mar 5th
M&M 22393 G-11 PRECISION MILL MILLING TOOL WITH CASE D268687

M&M 22393 G-11 PRECISION MILL MILLING TOOL WITH CASE D268687

  • Delta, Ohio, United States
  • Mar 5th
HARDINGE S/N 23094 PRECISION TOOL ROOM HORIZONTAL PRODUCTION KNEE MILL

HARDINGE S/N 23094 PRECISION TOOL ROOM HORIZONTAL PRODUCTION KNEE MILL

  • Chicago, Illinois, United States
  • Mar 5th
HARDINGE S/N 20354 PRECISION TOOL ROOM HORIZONTAL PRODUCTION KNEE MILL

HARDINGE S/N 20354 PRECISION TOOL ROOM HORIZONTAL PRODUCTION KNEE MILL

  • Chicago, Illinois, United States
  • Mar 5th
NICHOLS PRECISION TOOL ROOM HORIZONTAL PRODUCTION KNEE MILL

NICHOLS PRECISION TOOL ROOM HORIZONTAL PRODUCTION KNEE MILL

  • Chicago, Illinois, United States
  • Mar 5th
CLAUSING TOOLROOM LATHE 1440

CLAUSING TOOLROOM LATHE 1440

  • New Britain, Connecticut, United States
  • Mar 5th
Milltronics Partner 1 CNC Mill with lots of Extras

Milltronics Partner 1 CNC Mill with lots of Extras

  • Vineland, New Jersey, United States
  • Mar 5th
Williams 3/8 Square Lathe South Bend Wrench No 583 Machinist Southbend Tool Post

Williams 3/8 Square Lathe South Bend Wrench No 583 Machinist Southbend Tool Post

  • Bear, Delaware, United States
  • Mar 5th
Bridgeport Right Angle Milling Head Attachment R8

Bridgeport Right Angle Milling Head Attachment R8

  • Mount Pleasant, South Carolina, United States
  • Mar 5th
Niagara Cutters 1/4/x3/8x1/2x2-5/16 Lot of (2)

Niagara Cutters 1/4/x3/8x1/2x2-5/16 Lot of (2)

  • Riverside, California, United States
  • Mar 5th
Atlas Craftsman M1-5 Cross Slide FB 15 Milling Machine part mill shaper

Atlas Craftsman M1-5 Cross Slide FB 15 Milling Machine part mill shaper

  • Royal Oak, Michigan, United States
  • Mar 5th
Atlas Craftsman Milling Machine - # L2-61 Ball Crank / FB 129

Atlas Craftsman Milling Machine - # L2-61 Ball Crank / FB 129

  • Royal Oak, Michigan, United States
  • Mar 5th
Machinists Buy Now Ellis USA 6.5" Dividing Head --Flawless Perfect Non Better

Machinists Buy Now Ellis USA 6.5" Dividing Head --Flawless Perfect Non Better

  • Lutz, Florida, United States
  • Mar 5th
HORIZONTAL MILLING CUTTER - 2-3/4" X 1/2" X 1" - 90 DEGREE "V" CUT - HSS

HORIZONTAL MILLING CUTTER - 2-3/4" X 1/2" X 1" - 90 DEGREE "V" CUT - HSS

  • Fairless Hills, Pennsylvania, United States
  • Mar 4th
IRWIN Tools 1899926 Impact Performance Series Insert Bit Set, Assorted Torx, ...

IRWIN Tools 1899926 Impact Performance Series Insert Bit Set, Assorted Torx, ...

  • United States
  • Mar 4th
LOT OF 3 HSS STAGGERED TOOTH MILLING CUTTERS 4" WITH 1" BORE & RH ARBOR WELDON

LOT OF 3 HSS STAGGERED TOOTH MILLING CUTTERS 4" WITH 1" BORE & RH ARBOR WELDON

  • Ellington, New York, United States
  • Mar 4th
Collis NMTB 40 3/16" straight shank end mill holder #68040

Collis NMTB 40 3/16" straight shank end mill holder #68040

  • Buford, Georgia, United States
  • Mar 4th

People who viewed this item also vieved

Four 16C Collets Round Sizes 1 3/8, 1 17/64, 1 27/64, 1 33/64

Four 16C Collets Round Sizes 1 3/8, 1 17/64, 1 27/64, 1 33/64

  • Santa Monica, California, United States
  • Jan 30th
HARDINGE CHUCKER , OMNI TURN,ACCUSLIDE FAGOR 8025 TOOLING

HARDINGE CHUCKER , OMNI TURN,ACCUSLIDE FAGOR 8025 TOOLING

  • Coloma, Wisconsin, United States
  • Jan 30th
NATIONAL ACME 1" CAPACITY DIE HEAD W/ 1-1/2" SHANK

NATIONAL ACME 1" CAPACITY DIE HEAD W/ 1-1/2" SHANK

  • Ellington, New York, United States
  • Jan 30th
WALTER COR BOR INDEXABLE DRILL 1.25" SHANK 7" OAL 8110 0100 F 1.00 DIA

WALTER COR BOR INDEXABLE DRILL 1.25" SHANK 7" OAL 8110 0100 F 1.00 DIA

  • San Carlos, California, United States
  • Jan 30th
Severance 1" x 41 deg. Countersink CK-1"41

Severance 1" x 41 deg. Countersink CK-1"41

  • Lebanon, Tennessee, United States
  • Jan 30th
Cleveland 3/4" x 82 deg Countersink 1/2" shank turned down to 3/8"

Cleveland 3/4" x 82 deg Countersink 1/2" shank turned down to 3/8"

  • Lebanon, Tennessee, United States
  • Jan 30th
Press Brake Backgauge Ball Bearing Drive

Press Brake Backgauge Ball Bearing Drive

  • Santa Fe Springs, California, United States
  • Jan 30th
MAC TOOLS THREAD SETTER SET #RN60KA

MAC TOOLS THREAD SETTER SET #RN60KA

  • Branson, Missouri, United States
  • Jan 30th
Trumatic 260 Punch- Trumpf

Trumatic 260 Punch- Trumpf

  • Hanover, Minnesota, United States
  • Jan 30th
Diamond Bore Finishing Tool BF9987 .9210" x 8.00" 200/230 DBFT <019>

Diamond Bore Finishing Tool BF9987 .9210" x 8.00" 200/230 DBFT <019>

  • Saint Louis, Missouri, United States
  • Jan 30th
F20 HSS Countersink for Holes up to .78&#034; Shaviv Part #29050 3BF20

F20 HSS Countersink for Holes up to .78" Shaviv Part #29050 3BF20

  • Seminole, Florida, United States
  • Jan 30th
10pcs Type E300P HSS TiN Hooked Bi-Directional Deburring Blades Shaviv #29227

10pcs Type E300P HSS TiN Hooked Bi-Directional Deburring Blades Shaviv #29227

  • Seminole, Florida, United States
  • Jan 30th
Amada TEG-160E Tool / Die Grinder

Amada TEG-160E Tool / Die Grinder

  • Stone Mountain, Georgia, United States
  • Jan 30th
IN-PROCESS Crankshaft Grinding Gage 40-125mm 02 (ARNOLD, Berco, Van Norman, RMC)

IN-PROCESS Crankshaft Grinding Gage 40-125mm 02 (ARNOLD, Berco, Van Norman, RMC)

  • Ukraine, Ukraine
  • Jan 30th
Gold Tone 50mm Dia Bullnose Diamond Profile Wheel Router Bit for Marble

Gold Tone 50mm Dia Bullnose Diamond Profile Wheel Router Bit for Marble

  • Hong Kong, Hong Kong
  • Jan 30th
ORIGINAL SOUTH BEND 9&#034; 10K METAL LATHE LANTERN ROCKER TOOL POST ASSEMBLY

ORIGINAL SOUTH BEND 9" 10K METAL LATHE LANTERN ROCKER TOOL POST ASSEMBLY

  • Holmdel, New Jersey, United States
  • Jan 30th
ORIGINAL SOUTH BEND 9 10K METAL LATHE HEADSTOCK BACK GEAR ASSEMBLY

ORIGINAL SOUTH BEND 9 10K METAL LATHE HEADSTOCK BACK GEAR ASSEMBLY

  • Holmdel, New Jersey, United States
  • Jan 30th
ORIGINAL SOUTH BEND 9 10K METAL LATHE SADDLE DRIVE SCREW &amp; HANDLE ASSEMBLY

ORIGINAL SOUTH BEND 9 10K METAL LATHE SADDLE DRIVE SCREW & HANDLE ASSEMBLY

  • Holmdel, New Jersey, United States
  • Jan 30th
New Holland 18 ?x 18? Polypropylene Basket with 1/8&#034; Perforations - Nice!

New Holland 18 ?x 18? Polypropylene Basket with 1/8" Perforations - Nice!

  • Pawtucket, Rhode Island, United States
  • Jan 30th
J &amp; S Fluidmotion Wheel Dresser for Surface Grinders, Tool &amp; Cutter Grinders

J & S Fluidmotion Wheel Dresser for Surface Grinders, Tool & Cutter Grinders

  • Pawtucket, Rhode Island, United States
  • Jan 30th
EX-CELL-O CENTER LAPPING MACHINE Manual INSTALL OPERATE MAINTENANCE Book #RR457

EX-CELL-O CENTER LAPPING MACHINE Manual INSTALL OPERATE MAINTENANCE Book #RR457

  • Perth, Ontario, Canada
  • Jan 30th
Stryco Band Saw Welder MF-2

Stryco Band Saw Welder MF-2

  • Glendora, California, United States
  • Jan 30th
Hermann Schmidt Precision Magnetic Chuck, 5&#034; X 2.5&#034; X 2.5&#034;, Used With System 3R

Hermann Schmidt Precision Magnetic Chuck, 5" X 2.5" X 2.5", Used With System 3R

  • Lake Zurich, Illinois, United States
  • Feb 13th
System 3R EDM Dove Tail Head W/ 70mm Block For 54mm Macro Holders

System 3R EDM Dove Tail Head W/ 70mm Block For 54mm Macro Holders

  • Lake Zurich, Illinois, United States
  • Feb 13th
Mounting Blocks / Plates For EDM, 70mm X 70mm, Used With System 3R Tooling

Mounting Blocks / Plates For EDM, 70mm X 70mm, Used With System 3R Tooling

  • Lake Zurich, Illinois, United States
  • Feb 13th
WELLSAW BANDSAW, Model 1318

WELLSAW BANDSAW, Model 1318

  • Grand Prairie, Texas, United States
  • Feb 13th
Powermatic Model 87 Vertical Metal Band Saw 20&#034; Throat With Band Grinder Welder

Powermatic Model 87 Vertical Metal Band Saw 20" Throat With Band Grinder Welder

  • East Rutherford, New Jersey, United States
  • Feb 13th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies