+ Post new Ad
thomas and betts smart manual hydraulic tool dieless compression, US $400.00 – Picture 0
thomas and betts smart manual hydraulic tool dieless compression, US $400.00 – Picture 0

Thomas And Betts Smart Manual Hydraulic Tool Dieless Compression

US $400.00

  • Santa Maria, California, United States
  • May 9th
Open on mobile:
QR code
TBM8-750M-1 Tool is "smart" because it requires no dies Automatically compresses to the correct depth based on size of connector in jaws Creates Indent-style crimp C-type head swivels for easy crimp positioning Forged steel construction is well suited for both field and bench work How the  Tool Works; The  Tool was engineered with built-in intelligence* that enables it to sense the connector barrel diameter and automatically apply just the right amount of compression force. This eliminates virtually all air spaces and forms the connector and conductor strands into a solid mass, resulting in a high-quality, low-resistance connection. In addition, the tool clearly embosses "T&B" with each compression for positive verification that the correct tool was used. Uniform, Dependable Connections The SMART Tool gives you consistent, high-quality compression connections over a wide range of connector sizes. Available in manual, battery-powered and air-operated versions, this tool easily installs lugs and splices from #8 AWG through 900 mcm copper or 750 mcm aluminum -- without changing dies. For the specified wire range, all you need is one tool. You always have the right die size, eliminating die-selection mistakes. Lower Installation Costs Productivity will be greatly improved with theTool, especially when installing a variety of connector sizes or types. Initial investment is low, requiring minimal tool inventory. These benefits add up to lower installed cost. C-Type Yoke Offers Installation Convenience The C-type yoke configuration and large die spacing enable the Tool to slip directly over the connector. This means added speed and convenience when installing two-way splice connectors, especially in confined spaces. Installing Range: Output Force: 12 tons Up to 900 mcm copper lugs & splices  Up to 750 mcm aluminum lugs & splices Dimensions (L x W): 211/2" x 47/32" Weight: 13 lbs.
Condition:
New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. ...
Brand Thomas & Betts

Directions

Similar products from Crimping Tools

Zurn Pex Plumbing & Heating Systems Crimping Tool CRT-3T 1/2"

Zurn Pex Plumbing & Heating Systems Crimping Tool CRT-3T 1/2"

  • Whiteville, North Carolina, United States
  • May 13th
Set of Two Tyco Electronics Ampact Tools Large and Small 69611 69437 Extras

Set of Two Tyco Electronics Ampact Tools Large and Small 69611 69437 Extras

  • Arcadia, California, United States
  • May 13th
New Engineers precision crimping pliers PA-20 Japan Import Free Shipping :891

New Engineers precision crimping pliers PA-20 Japan Import Free Shipping :891

  • Tokyo, Japan
  • May 12th
Burndy Hypress Y45/Y46 series Hydraulic Crimper w/ case,U Die Adaptor PT 6515 - show original title

Burndy Hypress Y45/Y46 series Hydraulic Crimper w/ case,U Die Adaptor PT 6515 - show original title

  • La Barge, Wyoming, United States
  • May 12th
Waldom Electronics Tool Extractor W-HT-2285

Waldom Electronics Tool Extractor W-HT-2285

  • Easton, Pennsylvania, United States
  • May 11th
Coax Crimping Tool heavy duty made in sweden

Coax Crimping Tool heavy duty made in sweden

  • Las Vegas, Nevada, United States
  • May 11th
NOVINIUM DMC Power DMCPOWER Swage DLT45MAHD0002 1/2 TO 1.250 STRIPPER BLADES

NOVINIUM DMC Power DMCPOWER Swage DLT45MAHD0002 1/2 TO 1.250 STRIPPER BLADES

  • Leander, Texas, United States
  • May 11th
BURNDY MD6-8 Ratcheting Full-Cycle HYTOOL Crimper #6 Thru 4/0- show original title

BURNDY MD6-8 Ratcheting Full-Cycle HYTOOL Crimper #6 Thru 4/0- show original title

  • Walled Lake, Michigan, United States
  • May 10th
Amp VS3 Picabond Hand Tool Kit Telecommunication Crimping Splicing Tool 230971-1

Amp VS3 Picabond Hand Tool Kit Telecommunication Crimping Splicing Tool 230971-1

  • United States
  • May 10th
Huskie Crimper EP-510 12-Ton Hydraulic Compression 7 Dies BURNDY

Huskie Crimper EP-510 12-Ton Hydraulic Compression 7 Dies BURNDY

  • Walled Lake, Michigan, United States
  • May 10th
Tyco Amp 4651991 Extraction Tool Amp Blade

Tyco Amp 4651991 Extraction Tool Amp Blade

  • Caseyville, Illinois, United States
  • May 8th
T&b Thomas & Betts Wt400 Wt-400 Gsc-128 Use On Blue Colored Crimper

T&b Thomas & Betts Wt400 Wt-400 Gsc-128 Use On Blue Colored Crimper

  • East Brunswick, New Jersey, United States
  • May 8th
Cannon Plugs Cct-km-1 Crimp Tool Ratchet Pliers Aviation

Cannon Plugs Cct-km-1 Crimp Tool Ratchet Pliers Aviation

  • East Brunswick, New Jersey, United States
  • May 8th
AWG22-10 Insulated Terminals Ferrules Plier Ratcheting Crimper Tool Double Crimp

AWG22-10 Insulated Terminals Ferrules Plier Ratcheting Crimper Tool Double Crimp

  • ShangHai, China
  • May 7th
Daniels HX4 Crimp Tool Positioner Die Y322

Daniels HX4 Crimp Tool Positioner Die Y322

  • Caseyville, Illinois, United States
  • May 7th
Ideal CRIMPMASTER 30-503 Factory Sealed Ratchet Crimp Tool

Ideal CRIMPMASTER 30-503 Factory Sealed Ratchet Crimp Tool

  • Leominster, Massachusetts, United States
  • May 6th
Amp ErgoCrimp Steel Die Set for Insulated Terminals and Splices 0-539683-2 NEW!

Amp ErgoCrimp Steel Die Set for Insulated Terminals and Splices 0-539683-2 NEW!

  • Marion, Massachusetts, United States
  • May 6th
Molex 63811-7200 Crimpers HAND CRIMP TOOL Made In Germany

Molex 63811-7200 Crimpers HAND CRIMP TOOL Made In Germany

  • Hanover, New Mexico, United States
  • May 6th
Ideal 30-429 Multi-Crimp Tool, #10 to #22 AWG Wire, 9-3/4 in. long

Ideal 30-429 Multi-Crimp Tool, #10 to #22 AWG Wire, 9-3/4 in. long

  • Brick, New Jersey, United States
  • May 5th
Ferrule Ratchet Crimp Tool - .50 - 6mm2 (20-10 AWG) 10-1647

Ferrule Ratchet Crimp Tool - .50 - 6mm2 (20-10 AWG) 10-1647

  • Mukilteo, Washington, United States
  • May 5th

People who viewed this item also vieved

Eclipse Crimp Die Set #9pk-3003d27 for Insulated Terminals, AWG 22-8

Eclipse Crimp Die Set #9pk-3003d27 for Insulated Terminals, AWG 22-8

  • Newington, Connecticut, United States
  • Jan 29th
Eclipse Crimp Die Set #9pk-3003d29 for Amphenol Coax Connectors

Eclipse Crimp Die Set #9pk-3003d29 for Amphenol Coax Connectors

  • Newington, Connecticut, United States
  • Jan 29th
Thomas & Betts 71h Die Cat No. 11738

Thomas & Betts 71h Die Cat No. 11738

  • Silver Spring, Maryland, United States
  • Jan 29th
Lindstrom Precision Electronics Serrated 7891 Snipe Nose Jewelry Plier

Lindstrom Precision Electronics Serrated 7891 Snipe Nose Jewelry Plier

  • Mission Viejo, California, United States
  • Jan 29th
Lindstrom Precision Electronics Mechanical Supreme 7590 Round Nose Jewelry Plier

Lindstrom Precision Electronics Mechanical Supreme 7590 Round Nose Jewelry Plier

  • Mission Viejo, California, United States
  • Jan 29th
Lindstrom Precision Electronics Mechanical Supreme 7490 Flat Nose Jewelry Plier

Lindstrom Precision Electronics Mechanical Supreme 7490 Flat Nose Jewelry Plier

  • Mission Viejo, California, United States
  • Jan 29th
No-Nik wire stripper 0.012 & 0.014

No-Nik wire stripper 0.012 & 0.014

  • Temple City, California, United States
  • Jan 29th
Vintage Ideal Wire Stripper Made In The USA

Vintage Ideal Wire Stripper Made In The USA

  • Cedarville, Ohio, United States
  • Jan 29th
Vintage Ideal Wire Stripper Spec 50464-a 45-096 USAF Sycamore, IL

Vintage Ideal Wire Stripper Spec 50464-a 45-096 USAF Sycamore, IL

  • Cedarville, Ohio, United States
  • Jan 29th
LOT OF CABLE SUPPORT GRIPS .500-.610, .500-.620. ..560-.730 AND 620-1.00

LOT OF CABLE SUPPORT GRIPS .500-.610, .500-.620. ..560-.730 AND 620-1.00

  • Chowchilla, California, United States
  • Feb 14th
Leviton L7604 Non-Metallic Mesh, 90 Degrees, Cable Diameter .187 - .250-Inches

Leviton L7604 Non-Metallic Mesh, 90 Degrees, Cable Diameter .187 - .250-Inches

  • United States
  • Feb 14th
KLEIN TOOLS 56011 50' Nylon Fish Tape

KLEIN TOOLS 56011 50' Nylon Fish Tape

  • Phoenix, Arizona, United States
  • Feb 14th
S & C 5300R3 LOADBUSTER-LOADBREAKER

S & C 5300R3 LOADBUSTER-LOADBREAKER

  • Palm Beach Gardens, Florida, United States
  • Feb 15th
Erico Cadwell plus welding material asssorted Large Lot NEW

Erico Cadwell plus welding material asssorted Large Lot NEW

  • Redford, Michigan, United States
  • Feb 15th
AMERICAN BEAUTY TOOLS 105PTM Resistance Soldering Timer Module

AMERICAN BEAUTY TOOLS 105PTM Resistance Soldering Timer Module

  • Hummelstown, Pennsylvania, United States
  • Feb 15th
pic Development Board PCB with prototyping for PIC DIP40 microcontrollers

pic Development Board PCB with prototyping for PIC DIP40 microcontrollers

  • Nanning, Guangxi, China
  • Feb 16th
pic Development Board PCB for PIC DIP40 microcontrollers

pic Development Board PCB for PIC DIP40 microcontrollers

  • Nanning, Guangxi, China
  • Feb 16th
MSP430 Development Board PCB with prototyping for TQFP64 msp430149 147 169 148

MSP430 Development Board PCB with prototyping for TQFP64 msp430149 147 169 148

  • Nanning, Guangxi, China
  • Feb 16th
New Southwire Hot-Riveted Pivot Joint Cable Cutting Blades Wire Cutter CRV Steel

New Southwire Hot-Riveted Pivot Joint Cable Cutting Blades Wire Cutter CRV Steel

  • San Francisco, California, United States
  • Feb 17th
42" Large Peerless Mechanical Chain Cutter Tool. Need Only 1 Cut to Remove Link

42" Large Peerless Mechanical Chain Cutter Tool. Need Only 1 Cut to Remove Link

  • Fayetteville, North Carolina, United States
  • Feb 17th
Burndy Type YCC-1 Remote Hydraulic Wire Cable Cutter Head Used Free Shipping

Burndy Type YCC-1 Remote Hydraulic Wire Cable Cutter Head Used Free Shipping

  • Redford, Michigan, United States
  • Feb 17th
GREENLEE 115VAC 60-CYC. 11A ELECTRIC PIPE BENDER NO. 555 105066

GREENLEE 115VAC 60-CYC. 11A ELECTRIC PIPE BENDER NO. 555 105066

  • United States
  • Mar 27th
(1) Nice Current Tool Greenlee 1811 Little Kicker 3/4" EMT Offset Conduit Bender

(1) Nice Current Tool Greenlee 1811 Little Kicker 3/4" EMT Offset Conduit Bender

  • Charlevoix, Michigan, United States
  • Mar 27th
Greenlee 843F Site Rite Iron Hand Bender Head

Greenlee 843F Site Rite Iron Hand Bender Head

  • Mississauga, ON, Canada
  • Mar 27th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies