+ Post new Ad
THREAD ROLL HOLDER BROWN & SHARPE MODEL 83-122 FOR NARROW ROLLS, US $43.97 – Picture 0
THREAD ROLL HOLDER BROWN & SHARPE MODEL 83-122 FOR NARROW ROLLS, US $43.97 – Picture 1
THREAD ROLL HOLDER BROWN & SHARPE MODEL 83-122 FOR NARROW ROLLS, US $43.97 – Picture 2
THREAD ROLL HOLDER BROWN & SHARPE MODEL 83-122 FOR NARROW ROLLS, US $43.97 – Picture 3
THREAD ROLL HOLDER BROWN & SHARPE MODEL 83-122 FOR NARROW ROLLS, US $43.97 – Picture 4
THREAD ROLL HOLDER BROWN & SHARPE MODEL 83-122 FOR NARROW ROLLS, US $43.97 – Picture 5
THREAD ROLL HOLDER BROWN & SHARPE MODEL 83-122 FOR NARROW ROLLS, US $43.97 – Picture 6
THREAD ROLL HOLDER BROWN & SHARPE MODEL 83-122 FOR NARROW ROLLS, US $43.97 – Picture 7
THREAD ROLL HOLDER BROWN & SHARPE MODEL 83-122 FOR NARROW ROLLS, US $43.97 – Picture 0
THREAD ROLL HOLDER BROWN & SHARPE MODEL 83-122 FOR NARROW ROLLS, US $43.97 – Picture 1
THREAD ROLL HOLDER BROWN & SHARPE MODEL 83-122 FOR NARROW ROLLS, US $43.97 – Picture 2
THREAD ROLL HOLDER BROWN & SHARPE MODEL 83-122 FOR NARROW ROLLS, US $43.97 – Picture 3
THREAD ROLL HOLDER BROWN & SHARPE MODEL 83-122 FOR NARROW ROLLS, US $43.97 – Picture 4
THREAD ROLL HOLDER BROWN & SHARPE MODEL 83-122 FOR NARROW ROLLS, US $43.97 – Picture 5
THREAD ROLL HOLDER BROWN & SHARPE MODEL 83-122 FOR NARROW ROLLS, US $43.97 – Picture 6
THREAD ROLL HOLDER BROWN & SHARPE MODEL 83-122 FOR NARROW ROLLS, US $43.97 – Picture 7

Thread Roll Holder Brown & Sharpe Model 83-122 For Narrow Rolls

US $43.97

  • Jamestown, New York, United States
  • Jan 30th
Open on mobile:
QR code
Thank You For Looking At Our Products Product Information: Brown & Sharpe Thread Roll Holder  for Narrow Thread Rolls Made in USA Model No. 83-122 Product Features & Specifications: Approximately 11/16" Tool Capacity 1/2" T-Slot Some More Information About Thread Rolling From the Brown & Sharpe Website: For "Bump" Thread Rolling From Front or Back Cross Slides! B & S Thread Roll Holders are made in five different sizes to accommodate standard thread rolls in a wide range of thread sizes. The holders are available in two styles, one for narrow and one for wide thread rolls. The design of the holders includes a swivel arrangement which can be adjusted to compensate for any deflection in work caused by pressure of the rolls. The end of the body holding the roll has one thin support so that the thread roll can be used close to the collet. Rolls are mounted on long-wearing carbide pins. Holders can be used on either the front or back cross slide by turning the tool over and merely reversing the position of clamping bolt and swivel. A spacer is supplied with the wide holders which accommodate rolls of two different widths. Product Code: 14122307
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Brown & Sharpe
Model 83-122

Directions

Similar products from Screw Machines Equipment

BROWN & SHARPE #22 SERRATED ROUND COLLET. 7/8" 12241420

BROWN & SHARPE #22 SERRATED ROUND COLLET. 7/8" 12241420

  • Fox Lake, Illinois, United States
  • Jan 30th
PORST #22 ROUND COLLET. 1" 12241421

PORST #22 ROUND COLLET. 1" 12241421

  • Fox Lake, Illinois, United States
  • Jan 30th
BROWN & SHARPE #22 ROUND COLLET. .318" 12241422

BROWN & SHARPE #22 ROUND COLLET. .318" 12241422

  • Fox Lake, Illinois, United States
  • Jan 30th
PORST #22 ROUND COLLET, .273" 12241423

PORST #22 ROUND COLLET, .273" 12241423

  • Fox Lake, Illinois, United States
  • Jan 30th
CUT OFF BLADE TOOL HOLDER BROWN & SHARPE HIGH FRONT MODEL 711-147-122 TWIN TIP

CUT OFF BLADE TOOL HOLDER BROWN & SHARPE HIGH FRONT MODEL 711-147-122 TWIN TIP

  • Jamestown, New York, United States
  • Jan 30th
CUT OFF BLADE TOOL HOLDER BROWN & SHARPE HIGH FRONT MODEL 147-122 + BLADE

CUT OFF BLADE TOOL HOLDER BROWN & SHARPE HIGH FRONT MODEL 147-122 + BLADE

  • Jamestown, New York, United States
  • Jan 30th
CUT OFF TOOL POST BROWN & SHARPE LOW BACK MODEL 146-122 + HSS BLADE

CUT OFF TOOL POST BROWN & SHARPE LOW BACK MODEL 146-122 + HSS BLADE

  • Jamestown, New York, United States
  • Jan 30th
CUT OFF TOOL POST EMPIRE TOOL MODEL 72 + HSS BLADE

CUT OFF TOOL POST EMPIRE TOOL MODEL 72 + HSS BLADE

  • Jamestown, New York, United States
  • Jan 30th
CUT OFF TOOL POSTS PAIR OF MARTIN C&T CO. LEFT HAND & RIGHT HAND + HSS BLADE

CUT OFF TOOL POSTS PAIR OF MARTIN C&T CO. LEFT HAND & RIGHT HAND + HSS BLADE

  • Jamestown, New York, United States
  • Jan 30th
CUT OFF BLADE TOOL POST HOLDER HEAVY DUTY HIGH BACK 11/16" CAPACITY

CUT OFF BLADE TOOL POST HOLDER HEAVY DUTY HIGH BACK 11/16" CAPACITY

  • Jamestown, New York, United States
  • Jan 30th
ADJUSTABLE GUIDE RIGHT HAND BROWN & SHARPE MODEL 245-122

ADJUSTABLE GUIDE RIGHT HAND BROWN & SHARPE MODEL 245-122

  • Jamestown, New York, United States
  • Jan 30th
FIXED GUIDE RIGHT HAND BROWN & SHARPE MODEL 22E

FIXED GUIDE RIGHT HAND BROWN & SHARPE MODEL 22E

  • Jamestown, New York, United States
  • Jan 30th
1-1/8" CAPACITY TOOL HOLDER FOR AUTOMATIC SCREW MACHINES HEAVY DUTY

1-1/8" CAPACITY TOOL HOLDER FOR AUTOMATIC SCREW MACHINES HEAVY DUTY

  • Jamestown, New York, United States
  • Jan 30th
CNC Versatool Die Head

CNC Versatool Die Head

  • Rochester, New York, United States
  • Jan 30th
GEOMETRIC .232-26 MILLED CHASERS FOR 5/16" D, DS,DSA

GEOMETRIC .232-26 MILLED CHASERS FOR 5/16" D, DS,DSA

  • Fox Lake, Illinois, United States
  • Jan 30th
WALTON 10 REPS SCREW EXTRACTOR 50010 *NEW*

WALTON 10 REPS SCREW EXTRACTOR 50010 *NEW*

  • Sunman, Indiana, United States
  • Jan 30th
GEOMETRIC .294-20 SPEC PROJECTED CHASERS FOR 5/16" D, DS,DSA, 5 HOOK, 45 CHAMFER

GEOMETRIC .294-20 SPEC PROJECTED CHASERS FOR 5/16" D, DS,DSA, 5 HOOK, 45 CHAMFER

  • Fox Lake, Illinois, United States
  • Jan 30th
GEOMETRIC .303-36 SPEC PROJ CHASERS FOR 5/16" D, DS,DSA, 15 HOOK, 45 CHAMFER

GEOMETRIC .303-36 SPEC PROJ CHASERS FOR 5/16" D, DS,DSA, 15 HOOK, 45 CHAMFER

  • Fox Lake, Illinois, United States
  • Jan 30th
GEOMETRIC .303-36 SPEC PROJ CHASERS FOR 5/16" D, DS,DSA, 5 HOOK, 45 CHAMFER

GEOMETRIC .303-36 SPEC PROJ CHASERS FOR 5/16" D, DS,DSA, 5 HOOK, 45 CHAMFER

  • Fox Lake, Illinois, United States
  • Jan 30th
GEOMETRIC .357-30 SPEC MILLED CHASERS FOR 5/16" D, DS,DSA, 5 HOOK, 22 CHAMFER

GEOMETRIC .357-30 SPEC MILLED CHASERS FOR 5/16" D, DS,DSA, 5 HOOK, 22 CHAMFER

  • Fox Lake, Illinois, United States
  • Jan 30th

People who viewed this item also vieved

Jacobs Chuck No 32 Cap 0-3/8" from South Bend 1937 Workshop Lathe Model 405-Y

Jacobs Chuck No 32 Cap 0-3/8" from South Bend 1937 Workshop Lathe Model 405-Y

  • Troy, Michigan, United States
  • Feb 22nd
3/8 Tool Holder

3/8 Tool Holder

  • Sterling Heights, Michigan, United States
  • Feb 22nd
ATLAS LATHE SOUTHBEND 5 INCH REVOLING HAND WHEEL

ATLAS LATHE SOUTHBEND 5 INCH REVOLING HAND WHEEL

  • Neptune, New Jersey, United States
  • Feb 24th
HS Side Cutter for machine shop tools

HS Side Cutter for machine shop tools

  • Phoenix, Arizona, United States
  • Feb 25th
CLAUSING ATLAS 8520 Vertical Milling Machine Desk Bench Top Mini Mill USA Tool

CLAUSING ATLAS 8520 Vertical Milling Machine Desk Bench Top Mini Mill USA Tool

  • Brant Rock, Massachusetts, United States
  • Feb 25th
Criterion 3-1/8" Milling Head, Face Mill marked FC-34

Criterion 3-1/8" Milling Head, Face Mill marked FC-34

  • Lake Village, Indiana, United States
  • Feb 25th
HARDINGE HV-4N 5C COLLET JIG FXITURE HOLDER FOR PARTS

HARDINGE HV-4N 5C COLLET JIG FXITURE HOLDER FOR PARTS

  • Waterford, Michigan, United States
  • Mar 9th
Duro No. 412 Valve Grinder 7443-38

Duro No. 412 Valve Grinder 7443-38

  • Hillsdale, New Jersey, United States
  • Mar 9th
Norton 49155 8-Hole 220 Grit Hook and Loop Sanding Disc, 5-Inch, 4-Pack

Norton 49155 8-Hole 220 Grit Hook and Loop Sanding Disc, 5-Inch, 4-Pack

  • Greenville, Michigan, United States
  • Mar 9th
Forklift by Yale 5,000 Lb. Capacity In Good Operating Condition

Forklift by Yale 5,000 Lb. Capacity In Good Operating Condition

  • Dalton, Georgia, United States
  • Mar 9th
KOMBI SCHLEIF – AGATHON TYPE TOOL GRINDER - Inv # 4849

KOMBI SCHLEIF – AGATHON TYPE TOOL GRINDER - Inv # 4849

  • Farmingdale, New York, United States
  • Mar 9th
Serdi Carbide Pilot 6.99mm or .2752 Inches. Brand New/Sunnen/Rottler

Serdi Carbide Pilot 6.99mm or .2752 Inches. Brand New/Sunnen/Rottler

  • North Bend, Washington, United States
  • Mar 9th
Mueller #37032-SER Drill Holder, 7/8" Dia x 15.5" D-5 Machine Opt

Mueller #37032-SER Drill Holder, 7/8" Dia x 15.5" D-5 Machine Opt

  • Saginaw, Michigan, United States
  • Mar 10th
Mueller Machine Adapter Nipple, 1-1/2 FCS x 5" D-5 Machine Opt #37905

Mueller Machine Adapter Nipple, 1-1/2 FCS x 5" D-5 Machine Opt #37905

  • Saginaw, Michigan, United States
  • Mar 10th
commander Multi-drill heads (2) & parts. Model 5-00.

commander Multi-drill heads (2) & parts. Model 5-00.

  • Hokah, Minnesota, United States
  • Mar 10th
ENERPAC 1/2Ton Duck Bill SEPARATOR

ENERPAC 1/2Ton Duck Bill SEPARATOR

  • Simi Valley, California, United States
  • Mar 25th
GREENLEE BENDER WITH TOOLING DIES

GREENLEE BENDER WITH TOOLING DIES

  • Simi Valley, California, United States
  • Mar 25th
DI-ACRO TUBE BEND QUICK CLAMP

DI-ACRO TUBE BEND QUICK CLAMP

  • Simi Valley, California, United States
  • Mar 25th
LS Industries shaker, cleaner ,deburring machine

LS Industries shaker, cleaner ,deburring machine

  • Marysville, Ohio, United States
  • May 17th
SUNNEN P-180 HONALL STK 3994

SUNNEN P-180 HONALL STK 3994

  • Wadley, Alabama, United States
  • May 17th
SUNNEN CF-1126 GAGE SETTING FIXTURE 2-6" STK 4055

SUNNEN CF-1126 GAGE SETTING FIXTURE 2-6" STK 4055

  • Wadley, Alabama, United States
  • May 18th
DoAll Band Saw Vertical Air Feed **Awesome Saw* Like New 26.4 hours of use

DoAll Band Saw Vertical Air Feed **Awesome Saw* Like New 26.4 hours of use

  • Martinsville, Virginia, United States
  • May 24th
Dake-Johnson (Chun Jei) Model CB-330W Automatic, Horizontal Band Saw, New 2001

Dake-Johnson (Chun Jei) Model CB-330W Automatic, Horizontal Band Saw, New 2001

  • Sun Prairie, Wisconsin, United States
  • May 24th
Aluminum High Speed Cold Saw Head 5 hp 3400 rpm

Aluminum High Speed Cold Saw Head 5 hp 3400 rpm

  • Kalamazoo, Michigan, United States
  • May 24th
charmille 550 sinker edm c axis brake. binder

charmille 550 sinker edm c axis brake. binder

  • Brunswick, Ohio, United States
  • May 24th
D. D. Guide Diamond Guide Lower Type P. Wire 020P Size 0.2 MM Part #A623

D. D. Guide Diamond Guide Lower Type P. Wire 020P Size 0.2 MM Part #A623

  • McAllen, Texas, United States
  • May 24th
D. D. Guide Diamond Guide Upper Type P. Wire 020P Size 0.2 MM Part #A620

D. D. Guide Diamond Guide Upper Type P. Wire 020P Size 0.2 MM Part #A620

  • McAllen, Texas, United States
  • May 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies