+ Post new Ad
Threaded Blocks & Clamp Fixture Metalworking Tooling (5) Items Group Machinists, US $100 – Picture 0
Threaded Blocks & Clamp Fixture Metalworking Tooling (5) Items Group Machinists, US $100 – Picture 0

Threaded Blocks & Clamp Fixture Metalworking Tooling (5) Items Group Machinists

US $100

  • Half Way, Missouri, United States
  • May 31st
Open on mobile:
QR code
this listing includes 4 ea. threaded blocks and 1 ea. clamp.. for machinist's use in setup of work to be performed.. the blocks are all the same size with same threading.. the "large" side is 1-1/4" X 1" and the "small" side is 1" X 5/8" with each standing 1" tall.. the offset happens at midpoint with 1/2 being the larger dimension and 1/2 being the smaller dimension.. the clamp is 3-1/8 inches long overall with the inside clamp holding area at 2-1/4 inches long it is 3/4 inch wide and stands 1 inch tall..all threded holes are 3/8 inch (clamp and blocks) takes a 9/16" wrench  I reserve the right to ship USPS Priority Mail regardless of shipping option chosen..

Directions

Similar products from Supporting Blocks & Sets

Norton 7" Max. Wheel Dia. Phonopoint Diamond Dresser

Norton 7" Max. Wheel Dia. Phonopoint Diamond Dresser

  • Boston, Massachusetts, United States
  • May 31st
Assorted Machinist Tools

Assorted Machinist Tools

  • Chardon, Ohio, United States
  • May 31st
EDM 3R 20mm Shank Mounting Block Chuck Fixture * MACHINIST TOOLMAKER LATHE CNC

EDM 3R 20mm Shank Mounting Block Chuck Fixture * MACHINIST TOOLMAKER LATHE CNC

  • Seekonk, Massachusetts, United States
  • May 31st
SPI Machinist Tools Setup Block Open Never Use

SPI Machinist Tools Setup Block Open Never Use

  • Glenview, Illinois, United States
  • May 31st
Vintage Machinist Fishtail Block & Clamp Toolmaker Setup Hand Tool Made In USA

Vintage Machinist Fishtail Block & Clamp Toolmaker Setup Hand Tool Made In USA

  • Tiffin, Ohio, United States
  • May 31st
MACHINIST MADE 1 2 3 BLOCKS

MACHINIST MADE 1 2 3 BLOCKS

  • Newbury, Ohio, United States
  • May 31st
Machinist Pair Of 1" -2" - 3" Blocks Hardened & Ground

Machinist Pair Of 1" -2" - 3" Blocks Hardened & Ground

  • Yorktown, Indiana, United States
  • May 31st
MACHINIST TOOLS LATHE MILL Machinist Lot of V Blocks for Holding Set Up

MACHINIST TOOLS LATHE MILL Machinist Lot of V Blocks for Holding Set Up

  • Morris Plains, New Jersey, United States
  • May 31st
MACHINIST TOOLS LATHE MILL Machinist Lot of Toolmakers Tool Makers Block s

MACHINIST TOOLS LATHE MILL Machinist Lot of Toolmakers Tool Makers Block s

  • Morris Plains, New Jersey, United States
  • May 31st
Vee-Block [Machine Shop]

Vee-Block [Machine Shop]

  • Livonia, Michigan, United States
  • May 31st
TECO HEAVY DUTY SERRATED STEEL STEP BLOCKS 40106 MINT CONDITION TE-CO

TECO HEAVY DUTY SERRATED STEEL STEP BLOCKS 40106 MINT CONDITION TE-CO

  • Riverside, California, United States
  • May 31st
TECO HEAVY DUTY SERRATED STEEL STEP BLOCKS 40108 MINT CONDITION TE-CO

TECO HEAVY DUTY SERRATED STEEL STEP BLOCKS 40108 MINT CONDITION TE-CO

  • Riverside, California, United States
  • May 31st
V-Blocks w/Clamps (CTAM 9589)

V-Blocks w/Clamps (CTAM 9589)

  • Sicklerville, New Jersey, United States
  • May 31st
V-BLOCK SET STARRETT VINTAGE #278 MATCHED PAIR INSPECTION

V-BLOCK SET STARRETT VINTAGE #278 MATCHED PAIR INSPECTION

  • Philadelphia, Pennsylvania, United States
  • May 31st
SPI 1-2-3 setup blocks matched pair

SPI 1-2-3 setup blocks matched pair

  • Hadley, Pennsylvania, United States
  • May 31st
Machinist Workholding "V" Block w/Clamp

Machinist Workholding "V" Block w/Clamp

  • East Longmeadow, Massachusetts, United States
  • May 31st
Lot of 40 NAAMS Standards ALB403M NMSS ALB-403M L BLOCK

Lot of 40 NAAMS Standards ALB403M NMSS ALB-403M L BLOCK

  • Fraser, Michigan, United States
  • May 30th
Lot of 16 NAAMS Standard NC Blocks ANL067 NMSS ANL-067

Lot of 16 NAAMS Standard NC Blocks ANL067 NMSS ANL-067

  • Fraser, Michigan, United States
  • May 30th
Lot of 20 NAAMS Standards ALB111M NMSS ALB-111M

Lot of 20 NAAMS Standards ALB111M NMSS ALB-111M

  • Fraser, Michigan, United States
  • May 30th
Te-Co. 40104 2 Piece Step Blocks

Te-Co. 40104 2 Piece Step Blocks

  • Greenville, Pennsylvania, United States
  • May 30th

People who viewed this item also vieved

Huot #14803 ER25 Collet Rack Holder Holds (48) ER/RD/DR 25 Series Collets

Huot #14803 ER25 Collet Rack Holder Holds (48) ER/RD/DR 25 Series Collets

  • Huntington Beach, California, United States
  • Jan 30th
5C NULINE 7/32" HEX COLLET MACHINIST TOOLMAKER

5C NULINE 7/32" HEX COLLET MACHINIST TOOLMAKER

  • Punta Gorda, Florida, United States
  • Jan 30th
3AT Collet Assortment - 10 Pieces

3AT Collet Assortment - 10 Pieces

  • Garden City, Idaho, United States
  • Jan 30th
Craftsman Atlas Lathe #9-365 Face Plate

Craftsman Atlas Lathe #9-365 Face Plate

  • Fox Island, Washington, United States
  • Jan 30th
3 X 3 X 2-1/4 X 1/2 INCH STEEL ANGLE PLATE Drilled & Tapped 1/4" X 20 TPI

3 X 3 X 2-1/4 X 1/2 INCH STEEL ANGLE PLATE Drilled & Tapped 1/4" X 20 TPI

  • Millville, Pennsylvania, United States
  • Jan 30th
12" x 10" HEAVY DUTY CAST IRON FIXTURE PLATE w/ 1/2" HOLES

12" x 10" HEAVY DUTY CAST IRON FIXTURE PLATE w/ 1/2" HOLES

  • Covina, California, United States
  • Jan 30th
301-AM Red Plastic Lever Handle 16.7mm Stroke Push Pull Toggle Clamp 45Kg 99 Lbs

301-AM Red Plastic Lever Handle 16.7mm Stroke Push Pull Toggle Clamp 45Kg 99 Lbs

  • Hong Kong, Hong Kong
  • Feb 13th
Pair of Kant Twist Clamps #2 Patent Pending

Pair of Kant Twist Clamps #2 Patent Pending

  • Bayville, New Jersey, United States
  • Feb 13th
20mm Stroke Push Pull Type Straight Line Action Toggle Clamp 91Kg 200 Lbs 36202

20mm Stroke Push Pull Type Straight Line Action Toggle Clamp 91Kg 200 Lbs 36202

  • Hong Kong, Hong Kong
  • Feb 13th
6" Kurt Vise Model D - 675 Qty 3

6" Kurt Vise Model D - 675 Qty 3

  • Sparks, Nevada, United States
  • Feb 13th
9891/ VINTAGE COLUMBIAN 504 MACHINIST VISE~ Made in USA

9891/ VINTAGE COLUMBIAN 504 MACHINIST VISE~ Made in USA

  • Justin, Texas, United States
  • Feb 13th
MACHINIST MILLING VISE SWIVEL BASE MAYBE KURT 8"

MACHINIST MILLING VISE SWIVEL BASE MAYBE KURT 8"

  • Carol Stream, Illinois, United States
  • Feb 13th
READY CARBIDE TIPPED DEAD CENTER

READY CARBIDE TIPPED DEAD CENTER

  • Stratford, Connecticut, United States
  • Feb 14th
NEW UNUSED MT2 CUP CENTER & MT2 WORK ARBOR TOOL HOLDER SET 4 WOOD & METAL LATHE

NEW UNUSED MT2 CUP CENTER & MT2 WORK ARBOR TOOL HOLDER SET 4 WOOD & METAL LATHE

  • Danville, New Hampshire, United States
  • Feb 14th
NEW UNUSED MT1 WORK ARBOR TOOL HOLDER & MT1 DEAD CENTER LATHE TOOL KIT SET

NEW UNUSED MT1 WORK ARBOR TOOL HOLDER & MT1 DEAD CENTER LATHE TOOL KIT SET

  • Danville, New Hampshire, United States
  • Feb 14th
10''/250mm 4-Jaw Independent Lathe Chuck, Plain Back, #0557-0010

10''/250mm 4-Jaw Independent Lathe Chuck, Plain Back, #0557-0010

  • TORONTO, ONTARIO, Canada
  • Feb 14th
10'' 2-Piece Reversible Jaws 3-Jaw Chuck, Plain Back, x0.003" T.I.R., #0559-0116

10'' 2-Piece Reversible Jaws 3-Jaw Chuck, Plain Back, x0.003" T.I.R., #0559-0116

  • TORONTO, ONTARIO, Canada
  • Feb 14th
10" Diameter Lathe Chuck, 4" Through Hole, Clean Scroll and Jaws, Soft Jaws Also

10" Diameter Lathe Chuck, 4" Through Hole, Clean Scroll and Jaws, Soft Jaws Also

  • Saint Clair, Michigan, United States
  • Feb 14th
Pair of MAGNETIC CHUCK V-BLOCKS 4-1/4 x 2-3/8 x 1-7/8

Pair of MAGNETIC CHUCK V-BLOCKS 4-1/4 x 2-3/8 x 1-7/8

  • Rockford, Illinois, United States
  • Feb 24th
VINTAGE UNION METAL BOX WITH MACHINIST TOOLS T-NUTS ENDMILL CUTTERS

VINTAGE UNION METAL BOX WITH MACHINIST TOOLS T-NUTS ENDMILL CUTTERS

  • South El Monte, California, United States
  • Feb 25th
ATLAS CRAFTSMAN 12" LATHE ALL APRON ATTACHMENT PARTS + EXTRAS

ATLAS CRAFTSMAN 12" LATHE ALL APRON ATTACHMENT PARTS + EXTRAS

  • South El Monte, California, United States
  • Feb 25th
Roto Technologies RS8 5th Axis Tilting Rotary Table with control

Roto Technologies RS8 5th Axis Tilting Rotary Table with control

  • Santa Paula, California, United States
  • May 29th
MACHINIST SCIENTIFIC LAB SMALL CROSS SLIDE TABLE

MACHINIST SCIENTIFIC LAB SMALL CROSS SLIDE TABLE

  • Hillsborough, New Jersey, United States
  • May 30th
TSUDAKOMA RNCV-301R 12" 4TH AXIS NC ROTARY INDEXER USED

TSUDAKOMA RNCV-301R 12" 4TH AXIS NC ROTARY INDEXER USED

  • Minneapolis, Minnesota, United States
  • May 31st
"Classic Collection 2.5""X44"" Fab Rolls 54pcs-Red"

"Classic Collection 2.5""X44"" Fab Rolls 54pcs-Red"

  • Hickory Hills, Illinois, United States
  • May 24th
Lyndex-Nikken Lyndex 030-EXT 300DA Series Straight Shank Collet Chuck Extension,

Lyndex-Nikken Lyndex 030-EXT 300DA Series Straight Shank Collet Chuck Extension,

  • USA, United States
  • May 24th
Hardinge Sjogren Chuck Collet Closer No2A-D3 for 2J Collets, Monarch 10EE Lathe

Hardinge Sjogren Chuck Collet Closer No2A-D3 for 2J Collets, Monarch 10EE Lathe

  • Brea, California, United States
  • May 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies