TIL306 6,9-mm (0.270-Inch) seven-segment LED display with dec point end Logic, US $25.25 – Picture 0

TIL306 6,9-mm (0.270-Inch) seven-segment LED display with dec point end Logic, US $25.25 – Picture 1

TIL306 6,9-mm (0.270-Inch) seven-segment LED display with dec point end Logic, US $25.25 – Picture 2

TIL306 6,9-mm (0.270-Inch) seven-segment LED display with dec point end Logic, US $25.25 – Picture 3

TIL306 6,9-mm (0.270-Inch) seven-segment LED display with dec point end Logic, US $25.25 – Picture 4

TIL306 6,9-mm (0.270-Inch) seven-segment LED display with dec point end Logic, US $25.25 – Picture 5

Til306 6,9-mm (0.270-inch) Seven-segment Led Display With Dec Point End Logic

US $25.25

Stara Zagora, default, Bulgaria
Jan 29th

Open on mobile:
QR code

TIL306 6,9-mm (0.270-Inch) seven-segment LED display with decimal point end Logic • 6,9-mm (0.270-Inch) Character Height • High Luminous Intensity • TIL306 Has Left Decimal • TIL307 Has Right Decimal • Easy System Interface • Wide Viewing Angle • Internal TTL MSI Chip and Counter, Latch, Decoder, and Driver • Constant-Current Drive for Light-Emitting Diode • Wide Viewing Angle • Internal TTL MSI Chip and Counter, Latch, Decoder, and Driver • Constant-Current Drive for Light-Emitting Diode description These internally-driven seven-segment light-emitting-diode (LED) displays contain a BCD counter, a four-bit latch, and a decoder/LED driver in a single 16-pin package. A description of the functions of the inputs and outputs of these devices are in the terminal function table. The TTL MSI circuits contain the equivalent of 86 gates on a single chip. Logic inputs and outputs are completely TTL/DTL compatible. The buffered inputs are implemented with relatively large resistors in series with the bases of the input transistors to lower drive-current requirements to one-half of that required for a standard Series 54/74 TTL input. The serial-carry input, actually two internal loads, is rated as one standard series 54/74 load. The logic outputs, except RBO, are active pullup, and the latch outputs QA, QB, QC, and QD are each capable of driving three standard Series 54/74 loads at a low logic level or six loads at a high logic level while the maximum-count output is capable of driving five Series 54/74 loads at a low logic level or ten loads at a high logic level. The RBO node with passive pull-up serves as a ripple-blanking output with the capability to drive three Series 54/74 loads. The LED driver outputs are designed specifically to maintain a relatively constant on-level current of approximately 7 mA through each LED segment and decimal point. All inputs are diode clamped to minimize transmission-line effects, thereby simplifying system design. Maximum clock frequency is typically 18 MHz and power dissipation is typically 600 mW with all segments on SHIPMENT Handling time: 2 business days Shipping details: All packages are shipped by priority airmail with provided tracking information (Track. ?) Shipping time: EUROPE (All countries): 7 - 14 days ALL OTHER destinations (North America, South America, Asia, Africa, Australia): 10 - 20 days PAYMENT We accept PAYPAL only

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Texas Instruments
Country/Region of Manufacture	Korea, Republic of
Model	TIL306