US $190.99
| Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Setting Position | Tilting |
| Brand | Unbranded | ||
| MPN | Does Not Apply | ||
| UPC | Does not apply |
Directions
Similar products from Rotating Tables
4" Machining DOUBLE ANGLE ROTARY TABLE 4x4 from EDTTCO MFG CO + VISE & BOX
Used Haas HRT 160 Brushless Rebuilt Sigma 1 Rotary Table Indexer 4th Axis A axis
70 mm- 4 Jaws Independent Chuck+with Back Plate & T-nuts for Milling (M14 x 1)
3" Inches 75 mm 4 slots Rotary Table + 70 mm 4 jaws Independent chuck Tools
4" Inches (100mm) Quality Rotary Table +70 mm 4 Jaw Independent Chuck Back Plate
4" Inch/ 100 mm 4slot Tilting Rotary Table MT2 Bore-Milling, Lathe Machine Tool
3" Inches(75 mm)Tilting Rotary Table+ 70 mm 4 Jaws Independent Chuck Back Plate
3"/ 80 MM TILTING ROTARY TABLE WITH 65 MM 3 JAWS SELF CENTERING CHUCK ,TAILSTOCK
Haas SC01 Servo Control for HA5C Indexer 17 Pin
Haas HrtA6 Rotary Table 8" Chuck A1-6 *BRUSH 17 pin*
TILTING ROTARY TABLE 4"/100mm WITH 100 MM 4 JAW INDEPENDENT CHUCK & BACKPLATE
Tilting Rotary Table 4" / 100MM (4 Slot) Suitable Horizontal Vertical
TILTING ROTARY TABLE 4"/100mm WITH 100 MM 3 JAW SELF CENTERING CHUCK & BACKPLATE
ROTARY TABLE 4"/100mm WITH 100mm 4 JAW INDEPENDENT CHUCK & BACKPLATE
ROTARY TABLE 4"/100MM HORIZONTAL & VERTICAL (4 SLOTS)
HAAS 5C Indexer Manual Closer and model 5C HAAS Controller
Tailstock Live Center Height 65mm Tailstock Woodworking Lathe Chuck Handle Fo...
Bridgeport Adjustable Tailstock Footstock Rotary Dividing Dead Center 8”
Palmgren 8" Rotary Tilting Cross Slide Table w/ 4 Jaw Chuck
SUPER SPACER MASKING PLATES (8) Lot 2,3,4,6,8,9,10,12 Divisions (SEE PHOTOS)
People who viewed this item also vieved
V-Block w/ Clamp 6" L x 6" W x 4" H 90 Deg V Angle - Hardened Steel |47B|
Machinist One Pair (2) 12" x 1 3/4" Precision Parallels Blocks
BROSET PRECISION STOP BLOCK & Other Work holding Aluminum Brackets 3 pc Lot
Machinists 12/6 Buy Now USA 4 x .250 Circular Mill Cutter---see all !!!
Machinists 12/6 Buy Now USA 4 x .125 Circular Mill Cutter---see all !!!
Machinists 12/6 Buy Now USA 5 x .25 Circular Mill Cutter---see all !!!
Kitagawa Power Chuck Model 205B (3 available)
Chuck Jaws Assorted Lot 5 Chuck Jaws
ER25 COLLET CHUCK EXTENSION 3/4 X 2" SHANK STK21
Model 334 Destaco Pull action Clamp, 1000 lb Holding, 2 1/16" drawing Movement
2 Workbench Clamps, USA made, 4" Width & 6" Opening
clamps c type 3 pc lot imports used 2-3 in 1 2 in
Cincinnati Positrol Dead Length Chuck A8-DCT-6
COLLET CHUCK LATHE NOSE PIECE W/ L0 MOUNT
NEW 19/32" PARLEC 150PG SINGLE ANGLE COLLETS 150PG-0593
UP TO 2 NEW 43/64" LYNDEX 150PG SINGLE ANGLE COLLETS 150-043
UP TO 3 NEW 45/64" PARLEC 150PG SINGLE ANGLE COLLETS 150PG-0703
Slotted Precision Angle Plate Machinist 4 1/2" x 3 x 3 1/2"
2 Angle Plates Machinist 5 7/8" x 4 3/8" x 5 3/8"
Slotted Angle Plate Machinist 6" x 4" x 4"
Kearney & Trecker Large Dividing Head, #50 taper, 14" swing, no accessories
DIGITAL / ELECTRONIC HEIGHT GAGE 0 - 600 MM 24"
STARRETT NO. 255 18" VERNIER HEIGHT GAGE
NICE! KURT D60-4 SWIVEL BASE FOR 6" ANGLOCK VISES - D60, D675, D688
MILLING MILL MACHINE VISE W/ 6 X 1-3/4" JAWS - 4-3/4" CAPACITY
VISE JAWS PAIR STEPPED 3/8 X 1-1/8 X 4-3/8 #9800
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies