+ Post new Ad
Toggle Clamp, Horiz, 2.56 In, 10.70 In DE-STA-CO. Model # 235-U. Lot of 4. NEW, US $80.00 – Picture 0
Toggle Clamp, Horiz, 2.56 In, 10.70 In DE-STA-CO. Model # 235-U. Lot of 4. NEW, US $80.00 – Picture 1
Toggle Clamp, Horiz, 2.56 In, 10.70 In DE-STA-CO. Model # 235-U. Lot of 4. NEW, US $80.00 – Picture 2
Toggle Clamp, Horiz, 2.56 In, 10.70 In DE-STA-CO. Model # 235-U. Lot of 4. NEW, US $80.00 – Picture 3
Toggle Clamp, Horiz, 2.56 In, 10.70 In DE-STA-CO. Model # 235-U. Lot of 4. NEW, US $80.00 – Picture 0
Toggle Clamp, Horiz, 2.56 In, 10.70 In DE-STA-CO. Model # 235-U. Lot of 4. NEW, US $80.00 – Picture 1
Toggle Clamp, Horiz, 2.56 In, 10.70 In DE-STA-CO. Model # 235-U. Lot of 4. NEW, US $80.00 – Picture 2
Toggle Clamp, Horiz, 2.56 In, 10.70 In DE-STA-CO. Model # 235-U. Lot of 4. NEW, US $80.00 – Picture 3

Toggle Clamp, Horiz, 2.56 In, 10.70 In De-sta-co. Model # 235-u. Lot Of 4. New

US $80.00

  • Newnan, Georgia, United States
  • Feb 25th
Open on mobile:
QR code
Toggle Clamp, Horiz, 2.56 In, 10.70 In  DE-STA-CO Model # 235-U Technical Specs ItemToggle Clamp TypeHorizontal Handle Hold Down Holding Capacity (Lb.)750 Overall Height (In.)2.56 Overall Length (In.)10.70 Height Under Arm (In.)1.75 Dia. (In.)0.34 Base Mounting Centers (In.)1.63 x 1.63 ArmU-Shaped Handle92 Degrees SpindleFlat Cushion Neoprene Thread SizeM10 Includes240208-M Spindle (1) 235106 Flanged Washer (2) Details Toggle Clamps Feature corrosion-resistant stainless steel rivets and molded grips for safety. Can be used on a variety of fixtures for applications where hold-down action can replace fasteners. Models with Toggle Lock Plus release lever prevent accidental opening due to vibration. Horizontal Handle U-shaped arm Provide a low profile for applications where minimum vertical height is required. Lot of 4 NEW (3 in original bags, 1 without a bag). Condition as pictured.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Model 235-U
Type Horizontal Toggle Clamp

Directions

Similar products from Clips & Jaws

2 pre owned L.S. Starrett 161 D machinist clamps

2 pre owned L.S. Starrett 161 D machinist clamps

  • Seminole, Florida, United States
  • Feb 27th
J.H. Williams C Clamp Lot

J.H. Williams C Clamp Lot

  • Stafford, New York, United States
  • Feb 27th
J.H. Williams C Clamps Lot

J.H. Williams C Clamps Lot

  • Stafford, New York, United States
  • Feb 27th
2 Vintage KANT TWIST 2” clamps

2 Vintage KANT TWIST 2” clamps

  • Rahway, New Jersey, United States
  • Feb 27th
Vulcan No. 303 - J.H. Williams & Co. - Clamp

Vulcan No. 303 - J.H. Williams & Co. - Clamp

  • Lincoln, Illinois, United States
  • Feb 27th
CINCINNATI TOOL CO. HARGRAVE Large 10 Inched C Clamp Antique Vintage

CINCINNATI TOOL CO. HARGRAVE Large 10 Inched C Clamp Antique Vintage

  • Saint Louis, Missouri, United States
  • Feb 27th
4” heavy duty Deep Throat C Clamps

4” heavy duty Deep Throat C Clamps

  • Rahway, New Jersey, United States
  • Feb 27th
3” Drop Forged Deep Throat C Clamps

3” Drop Forged Deep Throat C Clamps

  • Rahway, New Jersey, United States
  • Feb 27th
(2) Armstrong 78-030 Heavy-Duty Steel C-Clamp 5/8"- 3-1/8" Opening 1-7/8" Throat

(2) Armstrong 78-030 Heavy-Duty Steel C-Clamp 5/8"- 3-1/8" Opening 1-7/8" Throat

  • Jackson, Tennessee, United States
  • Feb 27th
Northern Industrial Steel Beam Clamp-1 Ton BEAM RANGE 2-5/16" - 8-5/8" NEW NIB

Northern Industrial Steel Beam Clamp-1 Ton BEAM RANGE 2-5/16" - 8-5/8" NEW NIB

  • Croydon, Pennsylvania, United States
  • Feb 27th
Kant Twist Clamps Lot

Kant Twist Clamps Lot

  • Mastic Beach, New York, United States
  • Feb 25th
Model No 424 DeStaCo Squeeze Action Clamp

Model No 424 DeStaCo Squeeze Action Clamp

  • Ocala, Florida, United States
  • Feb 25th
Lot of 80 Vertical Hold Downs - Unused Surplus - Sealed in Package

Lot of 80 Vertical Hold Downs - Unused Surplus - Sealed in Package

  • Saint Peters, Missouri, United States
  • Feb 25th
5/8" MILLING HOLD DOWN STUDS, T NUTS, BARS AND STRAPS

5/8" MILLING HOLD DOWN STUDS, T NUTS, BARS AND STRAPS

  • Franklin Park, Illinois, United States
  • Feb 25th
5/8" MILLING HOLD DOWN STUDS, T NUTS, BARS AND STRAPS - VULCAN

5/8" MILLING HOLD DOWN STUDS, T NUTS, BARS AND STRAPS - VULCAN

  • Franklin Park, Illinois, United States
  • Feb 25th
Jewel #7 90 degree welding clamp

Jewel #7 90 degree welding clamp

  • Hammonton, New Jersey, United States
  • Feb 25th
NEW LOT 10 MUELLER ELECTRIC PEE WEE CLAMPS BU-45 BU45

NEW LOT 10 MUELLER ELECTRIC PEE WEE CLAMPS BU-45 BU45

  • Clover, South Carolina, United States
  • Feb 25th
Teco Workholding Step Blocks 40110 3.5" x 5.25" x 2"

Teco Workholding Step Blocks 40110 3.5" x 5.25" x 2"

  • Byron, Georgia, United States
  • Feb 25th
Milling Machine Work Holding Fixture Assortment T-Slot Hold Down Clamp

Milling Machine Work Holding Fixture Assortment T-Slot Hold Down Clamp

  • Glassboro, New Jersey, United States
  • Feb 25th
MILL CLAMPS HOLD DOWN BLOCKS 1/2" BOLTS STUDS NUTS WASHERS MILLING SET

MILL CLAMPS HOLD DOWN BLOCKS 1/2" BOLTS STUDS NUTS WASHERS MILLING SET

  • Hutchinson, Kansas, United States
  • Feb 25th

People who viewed this item also vieved

Hardinge 2J Collet 15/16" Round # 15390019009375 / No Internal Threads

Hardinge 2J Collet 15/16" Round # 15390019009375 / No Internal Threads

  • West Warwick, Rhode Island, United States
  • Jan 30th
Bridgeport Kwik change TG-100 collet tool holders

Bridgeport Kwik change TG-100 collet tool holders

  • Rochester, New York, United States
  • Jan 30th
New 11PCs Precision ER11 Spring Collet Set 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7mm

New 11PCs Precision ER11 Spring Collet Set 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7mm

  • ChangAN Town DongGuan City, ???, China
  • Jan 30th
SANKYO OILLESS MWP 48-100 WEAR PLATE - 2PCS - NEW - FREE SHIPPING!

SANKYO OILLESS MWP 48-100 WEAR PLATE - 2PCS - NEW - FREE SHIPPING!

  • Otisville, Michigan, United States
  • Jan 30th
Machinist Fixture or Tooling

Machinist Fixture or Tooling

  • Berlin, Connecticut, United States
  • Jan 30th
Machinist Fixture or Tooling, Chuck?

Machinist Fixture or Tooling, Chuck?

  • Berlin, Connecticut, United States
  • Jan 30th
vintage Desmond Stephan vise #500 5 inch

vintage Desmond Stephan vise #500 5 inch

  • Schoolcraft, Michigan, United States
  • Feb 13th
Te-co Workholding Single Station Model PWS-6900 Vice Great Condition 6 Avail!

Te-co Workholding Single Station Model PWS-6900 Vice Great Condition 6 Avail!

  • Watertown, Connecticut, United States
  • Feb 13th
6" PRECISION VISE KURT-TYPE SWIVEL LATHE ID OD GRINDING TOOLING M850600 NEW!

6" PRECISION VISE KURT-TYPE SWIVEL LATHE ID OD GRINDING TOOLING M850600 NEW!

  • Broadview Heights, Ohio, United States
  • Feb 13th
Bison Live Center 8811-4 Mounted on Morse Taper

Bison Live Center 8811-4 Mounted on Morse Taper

  • Saint Peters, Missouri, United States
  • Feb 14th
10 inch 3 jaw tru-set chuck.

10 inch 3 jaw tru-set chuck.

  • Southampton, Pennsylvania, United States
  • Feb 14th
Straight Shank Collet Chuck C20 ER11A 100L Toolholder CNC Milling Extension Rod

Straight Shank Collet Chuck C20 ER11A 100L Toolholder CNC Milling Extension Rod

  • Shen Zhen, China
  • Feb 14th
UNION MANUFACTURING - 10” 3–JAW LATHE CHUCK – MODEL 12310 – SCROLL STYLE - A38

UNION MANUFACTURING - 10” 3–JAW LATHE CHUCK – MODEL 12310 – SCROLL STYLE - A38

  • Bloomfield Hills, Michigan, United States
  • Feb 14th
Morse Tapper #3 Live Center Oliver Delta Woodworking

Morse Tapper #3 Live Center Oliver Delta Woodworking

  • Hesperia, California, United States
  • Feb 15th
NEW - 3MT Carbide Tipped Dead Center - NEW

NEW - 3MT Carbide Tipped Dead Center - NEW

  • Glendale, Arizona, United States
  • Feb 15th
Delta Milwaukee Univise for Tool & Cutter Grinder

Delta Milwaukee Univise for Tool & Cutter Grinder

  • Garden City, Idaho, United States
  • Feb 27th
MACHINIST LATHE MILL Very Large Telescoping Steady Rest South Bend Era

MACHINIST LATHE MILL Very Large Telescoping Steady Rest South Bend Era

  • Morris Plains, New Jersey, United States
  • Feb 27th
STARRETT NO.827B EDGE FINDER

STARRETT NO.827B EDGE FINDER

  • Ashland, Ohio, United States
  • Feb 27th
PARTIAL SET • 33 ANTON 1/4 X 6” PRECISION HARDENED PARALLELS & WOOD STORAGE RACK

PARTIAL SET • 33 ANTON 1/4 X 6” PRECISION HARDENED PARALLELS & WOOD STORAGE RACK

  • Scappoose, Oregon, United States
  • May 14th
Machinist Precision/Ground x12 Blocks Lot 1-2-3 Sets & Larger Sets/Inspection

Machinist Precision/Ground x12 Blocks Lot 1-2-3 Sets & Larger Sets/Inspection

  • Twinsburg, Ohio, United States
  • May 15th
INSPECTION GRADE MITUTOYO MATCHED V-BLOCKS WITH CLAMPS

INSPECTION GRADE MITUTOYO MATCHED V-BLOCKS WITH CLAMPS

  • Wilmington, Delaware, United States
  • May 16th
Haas HA5C-2 Dual Station 5C Programmable Rotary Table

Haas HA5C-2 Dual Station 5C Programmable Rotary Table

  • Minneapolis, Minnesota, United States
  • Jun 4th
Unislide Assembly-Velmex Series A4000

Unislide Assembly-Velmex Series A4000

  • Bates City, Missouri, United States
  • Jun 4th
SMW RT-250 Programmable 4th Axis Indexer w/ System 45 Controller

SMW RT-250 Programmable 4th Axis Indexer w/ System 45 Controller

  • Minneapolis, Minnesota, United States
  • Jun 5th
KENNAMETAL TG-100 Collet Chuck, 1.5” Straight Shank

KENNAMETAL TG-100 Collet Chuck, 1.5” Straight Shank

  • Minneapolis, Minnesota, United States
  • May 24th
Hardinge Sjogren Speed Chuck NO2-D6", (13) 2J Collet, D16 Camlock, Collet Nose

Hardinge Sjogren Speed Chuck NO2-D6", (13) 2J Collet, D16 Camlock, Collet Nose

  • Hopkins, Minnesota, United States
  • May 24th
Young Bros. Young Bros 02363 36 Piece Heavy Duty Stamp Combination Letter and

Young Bros. Young Bros 02363 36 Piece Heavy Duty Stamp Combination Letter and

  • USA, United States
  • May 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies