Topcon Hiper GGD L1 L2 GPS GLONASS RTK Base or Rover Receiver 430-450 Mhz, US $4,295.00 – Picture 0

Topcon Hiper GGD L1 L2 GPS GLONASS RTK Base or Rover Receiver 430-450 Mhz, US $4,295.00 – Picture 1

Topcon Hiper GGD L1 L2 GPS GLONASS RTK Base or Rover Receiver 430-450 Mhz, US $4,295.00 – Picture 2

Topcon Hiper GGD L1 L2 GPS GLONASS RTK Base or Rover Receiver 430-450 Mhz, US $4,295.00 – Picture 3

Topcon Hiper GGD L1 L2 GPS GLONASS RTK Base or Rover Receiver 430-450 Mhz, US $4,295.00 – Picture 4

Topcon Hiper GGD L1 L2 GPS GLONASS RTK Base or Rover Receiver 430-450 Mhz, US $4,295.00 – Picture 5

Topcon Hiper GGD L1 L2 GPS GLONASS RTK Base or Rover Receiver 430-450 Mhz, US $4,295.00 – Picture 6

Topcon Hiper GGD L1 L2 GPS GLONASS RTK Base or Rover Receiver 430-450 Mhz, US $4,295.00 – Picture 7

Topcon Hiper GGD L1 L2 GPS GLONASS RTK Base or Rover Receiver 430-450 Mhz, US $4,295.00 – Picture 8

Topcon Hiper GGD L1 L2 GPS GLONASS RTK Base or Rover Receiver 430-450 Mhz, US $4,295.00 – Picture 9

Topcon Hiper Ggd L1 L2 Gps Glonass Rtk Base Or Rover Receiver 430-450 Mhz

US $4,295.00

Southgate, Michigan, United States
Jan 30th

Open on mobile:
QR code

Included Items Item Description Shipping Info Payment Info * Topcon Hiper GGD GPS GLONASS Base Or Rover Receiver [ID- X1081] w/ Options... - GPS - GLONASS - L1 - L2 - Code Differential Base - Code Differential Rover - RTK Base - Co-Op Tracking - Multipath Reduction - USB Port - Datums Support - Geoid Heigh - DGPS Mode - CMR Output - CMR Input - 430-450 MHz Radio Module * Topcon P/N: 14-008005-03 RS232 Cable * Antenna * AC Adapter/Charger * Power Cord * User Manual On CD-ROM * Hard Carrying Case Condition: Refurbished Warranty: 90 Day Exchange Topcon Hiper GGD L1 L2 GPS GLONASS Dual Constellation Base Or Rover 430-450 MHz Receiver w/ Options Topcon Hiper GGD Receiver Options GPS GLONASS L1 L2 Code Differential Base Code Differential Rover RTK Base Co-Op Tracking Multipath Reduction USB Port Datums Support Geoid Heigh DGPS Mode CMR Output CMR Input 430-450 MHz Radio Module Topcon Hiper GGD GPS GLONASS Receiver Topcon Positioning System’s HiPer GGD receiver is a dual-frequency, GPS+ receiver built to be the most advanced and compact receiver for the surveying market. The HiPer GGD is a multi-function, multi-purpose receiver intended for precision markets. Precision markets means markets for equipment, subsystems, components and software for surveying, construction, commercial mapping, civil engineering, precision agriculture and land-based construction and agriculture machine control, photogrammetry mapping, hydrographic and any use reasonably related to the foregoing. The HiPer GGD can receive and process both L1 and L2 signals, improving the accuracy of your survey points and positions. The GPS+ component of HiPer GGD receivers means you can access both the GPS (Global Positioning System) satellites of the United States, and the GLONASS (Global Navigation Satellite System) satellites of the Russian Federation, increasing the number of satellites your receiver can detect, thus improving the accuracy of your survey points, increasing productivity, and reducing cost. The dual-frequency and GPS+ features of the receiver combines to provide the only real time kinematic (RTK) system accurate for short and long baselines. Several other features, including multipath mitigation and co-op tracking, provide under-canopy and low signal strength reception. The receiver provide the functionality, accuracy, availability, and integrity needed for fast and easy data collection. Features: GPS + GLONASS Satellites Compact, lightweight design Dual frequency RTK GPS+ (dual constellation) tracking Fully integrated receiver/antenna Internal UHF radio Up to 96Mb of memory Specifications: Tracking Specifications Standard Channels L1 GPS, L1/L2 GPS, L1 GLONASS, L1 GPS + L1 GLONASS, WAAS/EGNOS Tracked Signals GPS/GLONASS, L1/L2 C/A and P-Code and Carrier, WAAS/EGNOS Survey Mode Static Kinematic (Continuous, Stop and Go) RTK (Real-time Kinematic) DGPS (Differential GPS) Survey Accuracy Static, Fast Static For L1+L2 – H: 3mm + 1ppm x D; V: 5mm + 1.4ppm x D For L1 – H: 5mm + 1.5ppm x D; V: 6mm + 1.5ppm x D Kinematic For L1+ L2 – H: 10mm + 1.5ppm x D; V: 20mm + 1.5ppm x D for L1 – H: 15mm + 1.5ppm x D; V: 30mm + 1.5ppm x D RTK For L1+ L2 – H: 10mm + 1.5ppm x D; V: 20mm + 1.5ppm x D For L1 – H: 15mm + 1.5ppm x D; V: 30mm + 1.5ppm x D Cold Start Warm Start Reacquisition < 60 sec < 10 sec < 1 sec Technology Co-Op tracking Low signal tracking Advanced Multipath mitigation WAAS Adjustable PLL and DLL parameters Radio Modem UHF Radio modem Internal Rx Data Storage and Display Status Indicators Four, three-color LED’s and three function keys Data Features Up to 20 Hz update rate for real time position and raw data (code and carrier) 10cm code phase and 0.1mm carrier phase precision RTCM SC104 version 2.1, 2.2, and 2.3 I/O Multiple Base RTCM Geoid and Magnetic Variation models RAIM Different DATUMs support Output of grid coordinates CMR and CMR+ support I/O Communication Ports Up to four high speed RS232 serial ports.GGD option also has a USB port. Connectors External GPS/GLONASS Antenna, Modem Antenna, PWR, USB (GGD option only) MINTER Four external LEDs ON/OFF control input Antenna GPS/GLONASS Antenna Internal Antenna Type Microstrip Memory Internal memory Compact flash card (not removable) Capacity Standard - 0 MB Max - 1 GB Logging Time 53 hours (8 MB, 15sec, L1/L2, 7 satellites) Logging Interval 0.05 to 85400 seconds, depending on purchased options Power Internal battery Li-ion, 3000 mAh, 7.4 V Battery size 132 x 35 x 18 (mm) Battery weight 165 g (1 battery) Number of built-in batteries 2 batteries Change battery non-detachable battery Operating Time With UHF PDL Radio ON: ~16 hours (HiPer GD) or ~12 hours (HiPer GGD) With UHF PDL Radio OFF: ~18 hours (HiPer GD) or ~14 hours (HiPer GGD) External Power 1 port Input voltage 6 to 28 V DC (for work) 9 to 28 V DC (for charge battery) Minimum Charge Current >=2 Amp Consumption Typical: 2.5W Maximum: 2.7W On-board Backup battery for timekeeping and almanac data storage; 10 years minimum operation Environment Operating temperature -30 C° to + 60 C° with batteries Storage temperature -40 C° to +75 C° with batteries Physical Enclosure Aluminum extrusion, rainproof Color Topcon Yellow Dimensions W:159 x H:88 x D:172 mm Weight 1.65 kg Antenna Internal Battery Two Internal Controller External Mounting 5/8-11 Seals Silicon (molding in color) Keys Three keys: Power – On/Off Function (FN) – start/stop data logging; switch information mode. Reset – receiver hardware reset LEDs Four LEDs: STAT – satellite and receiver status REC – record and data status BATT – battery status RX – modem status NMEA NMEA version Ver. 2.1, 2.2, 2.3, 3.0 output Messages GGA, GLL, GNS, GRS, GSA, GST, GSV, HDT, RMC, VTG, ZDA, ROT Output interval 1Hz standard; 5, 10, 20Hz optional DGPS Correction format RTCM SC104 Ver 2.1, 2.2, and 2.3 RTCM message type 1, 3, 9, 31, 32, 34; user selectable Process interval 1Hz standard; 5, 10, 20Hz optional Output interval for RTCM correction data 1Hz standard; 5, 10, 20Hz optional Elevation mask 0 to 90 deg (independent of data logging) Multi-base DGPS Differential correction select mode: Nearest, Mix, Best (optional) RTK Correction format CMR2/CMR+ (Trimble compatible), RTCM SC104 Ver 2.2 or 2.3 RTCM message type 3, 18, 19, 20, 21, 22; user selectable Reverse RTK Will be available in future Ambiguity initialize OTF (L1, L1/L2) Baseline Length Up to 50km in the morning and evening. Up to 32 km at noon. Initialize time 5 seconds to 10 min depending on the base line length and multipath conditions Output interval for CMR/RTCM 1Hz standard; 5, 10, 20Hz optional Elevation 0 to 90 degrees (independent of data logging) Solution mode Delay (synchronization) Extrapolation (not synchronized) Process interval 1Hz standard; 5, 10, 20Hz optional Latency Delay mode – 20 msec to 20 sec (depends on latency which receives corrections data from base receiver) Extrapolation – 20 to 30 msec Raw Data logging The receiver can record raw data at another interval during RTK operation Status Fix, Float, DOP, Data Link Status, Modem Latency, Common satellites, Percentage of fixing Results RTK coordinates, HRMS, VRMS, Covariance Matrix Ambiguity fixing level Selectable thresholds Low: 95%; Medium: 99.5%; High: 99.9% Tracking Functions Multi-path reduction Code and Carrier PLL/DLL Setting Bandwith, order, adjustable Co-op tracking loop setting On/Off, Static Mode, Bandwidth of individual PLL, Bandwidth of common PLL Smoothing interval Code and Carrier WAAS/EGNOS Standard Battery Charger (AC Adapter) Size W:60 x L:112 x H:36 mm Weight 235 g Operating Temperature 0 C° to +40 C° Storage Temperature -40 C° to +85 C° Input AC 90 to 264 V 1A (110 V AC) 47 to 63 Hz Output DC 12 V 2.5 A (30 W) Connector Input (AC): Outlet Output (DC): Fisher 5 Pin Battery Charge Time 7 hours for Full Charge 6 hours for 90% Charge We will attempt to ship your item(s) within 24 hours after payment has been received. Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information. We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you Put your listings on autopilot with Kyozou eBay Listing Software

Condition:	Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. ...	Brand	Topcon
Model	Hiper GGD