Toshiba 1600ep Uninterruptible Power Supply (ups) 3.6kva (incl. 3 Batteries)

US $1,200.00

Franklin, Tennessee, United States
Jul 25th

Open on mobile:
QR code

Toshiba 1600EP double-conversion online UPSLike-new physical condition inside and out, including LCD, front controls, and rear ports and connectors. Hot swappable batteries were removed and reinstalled when enclosure and batteries were inspected. UPS was in proper working order when uninstalled from surgery center after the practice was sold. No manuals or cd included. Unit is too heavy to ship (~365 lbs.), but seller will assist with local delivery in Nashville TN area. Pick-up preferred. Specs: Unit(Capacity): 3.6 kVA (3.1 kW) Input/output figures rated for 240 volts. Output ratings given for 0.85PF are only valid when the input voltage is greater than 204 volts; otherwise, ratings given for0.70PF are applicable. General Topology: True On-line Certifications: UL, CUL, ISO 9001, NEMA/PE1-1993 Input Characteristics Input Voltage: Single-phase, 208/240 Vac, -30% – +10% Input Frequency: 45 – 65 Hz (auto-sensing) Input Capacity: 3.6 kVA Input Power Factor: > 0.95 for all loads Current THD (linear load): < 5% total harmonic distortion Included AC Input Breaker Rating: 30 A/277 V Battery Characteristics Battery Type: Valve Regulated Lead Acid, Flame Retardant Backup time, fully charged @ 0.7 power factor, 77 °F: 14 min. minimum Backup time, fully charged @ 0.85 power factor, 77 °F: 10 min. minimum (Battery backup time may vary depending on the operating conditions and ambient temperature at the installation site.) Recharge Time: 24 hr. (full), 12 hr. (90%) for internal batteries only (An initial charge time of 24 hrs. is necessary to obtain proper battery performance level before unit is placed in operation.) Battery Voltage (Nominal) : 216 Vdc Output Characteristics Output Voltage: Single-phase, 240/208/120 V Output Voltage Regulation: ± 3% Output Frequency: ±0.5 Hz/1 Hz/1.5 Hz (factory or authorized service center selectable only) AUTO/MAN Frequency: Factory or authorized service center selectable only Voltage THD: < 3% for linear load; < 6% for non-linear load Common-Mode Noise: < 0.5 Vrms Rated Load Power Factor: 0.85 (0.6 – 1.0) lagging Efficiency (ac-dc-ac): > than 83% (without battery charge) Voltage Transient: < ±8% (Load of 0 – 100 %) Rated Output Current (rms): 15 A Max. Peak Output Current: 45 A Inverter Overload Capacity: 125% for 30 sec./150% for 10 sec. Bypass Overload Capacity: 125% for 10 min./1000% for 1 cycle Crest Factor: 3.0 Environment Operating Temperature (59 – 77 °F recommended): 60 Hz; 32 – 104 °F Storage Temperature: -4 – 104 °F Installation Area: To be installed in a well ventilated area free of airborne dust, metal particles or flammable gas, allow at least 4 inches on all sides. Operating Humidity: 30 – 90% non-condensing Altitude:< 3300 ft. (1000 m) above sea level (At 6600 ft (2000 m) above sea level, output capacity should be derated by 3%.) Acoustical Noise: 50 dB (A) maximum @ 1 meter from front panel Heat Generation: 1588 BTU/Hr Operation Diagnosis Battery Check: Performed on start up, by schedule, on-demand (user configurable) Input OV Protection: Standard Battery Lifetime: UPS calculates battery replacement time based upon battery ambient temperature (LCD display, LED and beeps) Internal Temperature: UPS gives indication of internal temperature, alarm when high temp Event Data Storage: 64 – Supply Mode, 32 – Backup, 16 – Faults Applications Switches: Generator compatibility Bypass Switch Bypass Disable: Static switch < cycle (50 Hz – 5 ms/60 Hz – 4.16 ms) Automatic Retransfer: Factory or authorized service center selectable only User Interface: Provided – Can be disabled from front panel Real Time Clock Schedule Operation: Standard – Minimum 3 days memory backup during power loss RUN/STOP Disable: Schedule ON/OFF operation of UPS using communication software Autostart: UPS has option for UPS to start automatically when AC is applied Remote ON/OFF: Standard – External terminal LED Display: 4 LED’s indicating input/output condition, warning and battery operation LCD Screen: 16 characters x 2 lines UPS Operation – 6 Keys: Run/Stop, Set/Monitor, Shift/Select, Del/Page Down, Reset/Page Up Buzzer Volume: Selectable by keypad – Low, High, Mute Power Connections: Standard – Hard wire Emergency Power Off: Standard – Terminal contacts only Remote Contacts: Standard (INV, BYP, BATT , LB, AC, FLT ) RS232ASCII Interface: Standard Mechanical Design Topology: Unit enclosure is made from sheet metal meeting NEMA1 and UL Type 1 Size: 27.5” H x 10.0” W x 33.0” D Paint System: Powder coating Fan Panel: Panel mounted on back of UPS to allow for easy replacement of fans without turning UPS off. Battery System Battery Replacement: Slide out battery packs accessible from front of UPS. Factory or authorized service center serviceable only. Battery Packs: Designed for battery acid leakage containment with six (6) batteries per pack. Battery Pack Size: 5” H x 7.3” W x 18.2” D Battery Pack Quantity: 3 Battery Manufacturer: Enersys Battery Type: NPX-35 Toshiba P/N for Battery Pack: 51896

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Mounting Style	Stand Alone
Installation Area	Indoor
Nominal Voltage Rating (DC)	216 Vdc
Brand	Toshiba
Nominal Current Rating	15 A
Output Voltage Rating (AC)	230 V
Plug Type	L620C
Efficiency	>83%
Nominal Capacity	3.6 kVA
Output Voltage Rating (DC)	Single-phase, 240/208/120 V
MPN	UE3G1E036-51T
Maximum Operating Temperature	40 °C (104 °F)
Minimum Operating Temperature	0 °C (32 °F)