Toshiba VT130G9U4110 G9 10HP 480V 3PH Adjustable Speed AC Drive NEW, US $1,892.31 – Picture 0

Toshiba VT130G9U4110 G9 10HP 480V 3PH Adjustable Speed AC Drive NEW, US $1,892.31 – Picture 1

Toshiba VT130G9U4110 G9 10HP 480V 3PH Adjustable Speed AC Drive NEW, US $1,892.31 – Picture 2

Toshiba VT130G9U4110 G9 10HP 480V 3PH Adjustable Speed AC Drive NEW, US $1,892.31 – Picture 3

Toshiba VT130G9U4110 G9 10HP 480V 3PH Adjustable Speed AC Drive NEW, US $1,892.31 – Picture 4

Toshiba VT130G9U4110 G9 10HP 480V 3PH Adjustable Speed AC Drive NEW, US $1,892.31 – Picture 5

Toshiba Vt130g9u4110 G9 10hp 480v 3ph Adjustable Speed Ac Drive New

US $1,892.31

Pensacola, Florida, United States
Jun 9th

Open on mobile:
QR code

Toshiba VT130G9U4110 G9 10HP 480V 3PH Adjustable Speed AC Drive NEW Description Toshiba VT130G9U4110 G9 10HP ADJUSTABLE SPEED AC DRIVE 480V 3 PHASE IN/OUT 50/60HZ IN 0-500HZ OUT The G9 adjustable speed drive is the most advanced severe duty drive ever offered by Toshiba. It is a blend of a robust power platform and a state-of-the-art control scheme. With its 115% continuous overload rating and its dual 32-bit processor controls, the G9 provides the ability to operate the toughest of applications while still maintaining a high level of control. POWERFUL The G9 drive has the highest overload capability available. It is rated at 115% continuous current, 150% up to 120 seconds, and 280% instantaneous current. The Motor-Over-Flux-Braking Technology allows the G9 to provide as much as 25% of its rated power for use in stopping a heavy or high inertia load without dynamic braking resistors. The G9 can operate in open or closed loop controls. Toshiba’s advanced vector control algorithm offers speed regulation of 0.1% sensorless and 0.01% with motor or process feedback. The G9 has the ability to switch on-the-fly between speed, torque, or position control modes. In feedback vector control mode, the G9 generates motor breakdown torque to hold the commanded position even while the equipment is stopped. DETAILED G9 MODEL SPECS Model Range 1 to 150 HP 1 to 350 HP Voltage Rating 200 to 240 V 380 to 480 V Input Voltage Tolerance ±10% ±10% Voltage Regulation Main Circuit Voltage Feedback Control (Automatic Regulation, ‘Fixed’ and ‘Control Off’ Selections) PWM Carrier Frequency Adjustable 0.5 to 15 kHz (ASD Specific, Consult Factory) Control System Sine Wave PWM System - Flux field current vector control V/f Pattern Open Loop Vector, Closed Loop Vector, Constant Torque, Variable Torque, Auto Torque Boost, Manual Torque Boost, 5-Point V/f Custom Curve Setting Overload Current Rating 115% Continuous, 150% for Two Minutes up to 100 HP, Consult Factory for Ratings Above 100 HP Frequency Setting Rotary Encoder Integrated into EOI, 0 to 10 V, ±10 V, 4 to 20 mA, Binary Input, Motorized Potentiometer Input Frequency Precision Analog Input ±0.2% of the Maximum Output Frequency, Digital Input ±0.01% of the Maximum Output Frequency Output Frequency Range 0 to 299 Hz Speed Regulation Closed Loop (Up to 0.01%, 1000:1 Speed Range), Open Loop (Up to 0.1%, 60:1 Speed Range) Discrete Input Terminals Eight Discrete Input Terminals Programmable to 67 Functions; Number of Terminals may be Increased Using Optional Hardware Analog Inputs One 4 to 20 mA, One 0 to 10 V, and One ±10 Discrete Output Contacts Three Output Contacts Programmable to 127 Functions Analog Outputs One Programmable 4 to 20 mA or 0 to 10 V and One 4 to 20 mA Output Control Board Communication Ports 2-Wire/4-Wire RS485 Power Terminals Input (L1, L2, L3); Output (T1, T2, T3); DCL(PO,PA); DBR (PA,PB); DC BUS (PA, PC) PID (Set Point Control) Proportional Gain, Integral Gain, Feedback Settings Upper/Lower Deviation Limits, Feedback Source Delay Filter, Feedback Settings Differential Gain Retry ASD can clear some faults upon trip automatically. Restart ASD will catch a coasting motor smoothly. Ambient Operating Temperature: -10 to +40°C; 14 to 104°F Humidity: 95% Non-Condensing Installation NEMA 1 Enclosure Type Electronic Operation Interface (EOI) LCD EOI (Liquid Crystal Display/ Electronic Operator Interface) Full English Back-Lit Display LED EOI Light Emitting Diode; Seven Segment Display LED Indicators Run (Red)/Stop (Green), Local/Remote (Green), DC Bus Charge Indicator (Red) Keys Local/Remote, ESC, Run, Mode, Stop/Reset Rotary Encoder Encoder with Integrated Enter Key for Frequency and Parameter Adjustments Monitoring Main Display Shows Two Monitored Items or can Display up to 17 User-Selected Scrolling Items Including: Output Frequency, Output Current, Output Voltage, Input Power, Output Power, Motor Overload Ratio, DC Bus Voltage, Compensation Frequency, PID Feedback, AM Output, FM Output, Motor Load, ASD Load, Run Time Selectable Display Units Completely Configurable along with Scaling Factor Multiple; Current Display Selectable Between Amps or %; Voltage Display Selectable Between Volts or % EOI Communications Ports RS232/485 ports standard NEW NO BOX 60 DAY DOA WARRANTY SURPLUS ITEM FROM WORKING FACILITY WILL EXPEDITE SHIPPING IF REQUESTED & PAID inkfrogproseries inkfrog terapeak inkFrog Analytics

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	RESERVED_PRODUCT_TITLE	MITSUBISHI
MPN	VT130G9U4110
Brand	TOSHIBA
UPC	Does Not Apply